Flexible cords and cables

In industrial establishments work conditions of maintenance and supervision's ensure that Only qualified person service the installation, flexible cords and flexible cables can be installed in above ground raceways That are no longer than blank feet, to protect the flexible cord or flexible cable from physical damage

50ft

TPT and TST cords shall be permitted and lakes not exceeding ____ feet when attached directly to a portable appliance rated 50W or less

8ft

Flexible chords and flexible cables shall be protected by blank or passing through holes in covers, outlet boxes, or similar enclosures

A) bushing B)fittings C)both (right answer) 400.17

Unless specifically permitted in 400.10, flexible cables, flexible quad sets, and power supply quad shall not be used where subject of physical damage

A) true 400.12 (7)

Flexible cords and cables can be used for ____

A)Wiring of luminaires, B)connecting of portable luminaires or appliances, C)connecting of utilized equipment to faculty frequent inner change, d)all of these

Flexible cord sets and Power supply cord shall not be concealed behind buildings ____, or run through doorways, windows, or similar openings

All of these 400.12

Flexible quad sets and supply cords shall not be used where they are

All of these 400.12

Flexible cord sets and power supply cards so I will not be permitted above suspended or drop ceilings even if contained within enclosed for use in other spaces are used for environmental air

B)false 400.12 ex)

A flexible cord conductor intended to be used as an _____ conductor shall have a continuous identifying marker readily distinguishing it from the other conductor or conductors. One means of identification is a braid finished to show a continuous cream color or a green color with one or more yellow stripes on one conductor

Equipment grounding conductor

Flexible cord sets and power supply cords shall not be used as suitable for ____ wiring

Fixed

Conductors with her flexible cards and flexible cables shall not be associated together in such a way that ____ temperature of the conductor is exceeded

Limiting

HPD cord shall be permitted for

Not hard usage

The allowable impassively of flexible chords and flexible cables is found in _____.

Tables 400.5(A)(1)and (A)(2)

Article 400 covers general requirements, applications, and construction specifications for flexible chords and flexible cables

True