Intro to CAD Test 4 11-13

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

Round

A _____ is a rounded exterior corner used to remove sharp edges or ease the contour of exterior corners. a. boss c. chamfer b. round d. fillet

Fillet

A _____ is a rounded interior corner used to relieve stress or ease the contour of inside corners. a. round c. fillet b. chamfer d. boss

Chamfer

A _____ is a small, angled surface used to relieve a sharp corner. a. fillet c. round b. boss d. chamfer

Centroid

A _____ is the mathematical center of a geometric figure. a. origin c. geode b. source d. centroid

False

A polar array is a pattern made up of columns and rows of objects.

Distance

Access the CHAMFER command and then use the _____ option to specify the chamfer distances from a corner. a. Offset c. Measure b. Distance d. Length

DUPLICATE

Access the _____ command to duplicate objects a. COPY c. DUPLICATE b. MULTIPLE d. REPLICATE

MOVE

Access the _____ command to move objects to a different location. a. MOVE c. PAN b. OFFSET d. COPY

PROPORTION

Access the _____ command to proportionately enlarge or reduce the size of objects. a. PROPORTION c. SCALE b. GAGE d. FACTOR

Array

An _____ is multiple copies of an object arranged in a pattern. a. arrangement c. array b. group d. configuration

True

An associative array is an array of copied, or static, source objects that do not form a single adjustable array object.

True

AutoCAD creates associative rectangular, polar, and path arrays by default

False

AutoCAD refers to all rounded corners as chamfers.

False

Destination points are points to define the original position of objects during an ALIGN operation.

True

Hovering over an unselected grip and allowing it to change color helps you select the correct grip, especially when multiple grips are close together

False

It is not necessary for lines to be collinear to be joined using the JOIN command.

Flase

It is possible to extend a closed object

False

It is possible to lengthen multiple objects at one time using the LENGTHEN command.

True

Noun/verb selection is performing tasks in AutoCAD by selecting the objects before activating a command. Verb/noun selection is performing tasks in AutoCAD by activating a command before selecting objects

True

Once you access the STRETCH command, you must use a crossing box, crossing lasso, or crossing polygon to select only the objects to stretch.

False

Standard grip boxes provide access to the OFFSET, TRIM, FILLET, EXTEND, and ZOOM commands

True

The CHAMFER command includes the same Polyline, Trim, and Multiple options, and the same ability to close polylines, as the FILLET command

True

The COPY command provides the same options as the MOVE command, allowing you to specify a base point and a second point, select a displacement using the Displacement option, or define the first point as the displacement.

False

The Copy option is an alternative to entering a rotation angle and allows you to specify a new angle in relation to an existing angle.

True

The EXTEND command includes the same Edge, Undo, and Project options as the TRIM command, and similar rules apply when using these options with the EXTEND command.

True

The MIRROR command allows you to reflect, or mirror, objects.

True

The MIRRTEXT system variable, which is set to 0 by default, prevents text from reversing during a mirror operation.

Quick

The _____ Properties palette lists common properties associated with the selected objects by default. a. Feature c. Express b. Object d. Quick

EXPLODE

The _____ command allows you to change a single object that consists of multiple items into a series of individual objects. a. BURST c. IMPLODE b. COLLAPSE d. EXPLODE

STRETCH

The _____ command allows you to modify certain dimensions of an object without changing other dimensions. a. ELONGATE c. OFFSET b. LENGTHEN d. STRETCH

BREAK

The _____ command can remove a portion of an object or split an object at a single point depending on the points and option you select. a. BREAK c. REDUCE b. REMOVE d. ELIMINATE

QSELECT

The _____ command is similar to the SELECTSIMILAR command, but it provides additional filters. a. ZSELECT c. FSELECT b. QSELECT d. MSELECT

ALIGN

The _____ command moves and rotates objects in one operation. a. REFERENCE c. ALIGN b. MOVE d. ROTATE

Properties

The _____ palette provides the same function as the Quick Properties palette, but allows you to view all properties and adjust all editable properties related to the selected objects a. Features c. Objects b. Tools d. Properties

Nudging

The term _____ refers to moving objects orthogonally by selecting the objects and using the arrow keys on the keyboard. a. pushing c. sliding b. bumping d. nudging

Shift

To remove objects from a selection set, hold down _____ and pick the objects to deselect. a. [Tab] c. [Alt] b. [Shift] d. [Ctrl]

False

Unselected grips are orange (Color 30) by default. A selected grip appears green (Color 3) by default

TRIM

Use the _____ command to cut lines, polylines, circles, arcs, ellipses, splines, xlines, and rays that extend beyond an intersection. a. CUT c. ELIMINATE b. TRIM d. REMOVE

EXTEND

Use the _____ command to extend lines, elliptical arcs, rays, open polylines, arcs, and splines to meet other objects. a. INCREASE c. LENGTHEN b. EXTEND d. ELONGATE

MATCHPROP

Use the _____ command to match, or "paint," properties from one object to other objects. a. PAINTPROP c. MATCHPROP b. CHANGEPROP d. OBJECTPROP

ROTATE

Use the _____ command to rotate objects. a. ROTATE c. SPIN b. TURN d. TWIST

Multiple

Use the _____ option to make several fillets without exiting the FILLET command. a. Continue c. Compound b. Several d. Multiple

ENTER

When editing with grips, you can press _____ to cycle through the MOVE, ROTATE, SCALE, and MIRROR commands. a. [Tab] c. [Ctrl] b. [Enter] d. [Shift]

Reference

When rotating with grips, you can use the _____ option to specify a new angle in relation to an existing angle. a. Orientation c. Align b. Reference d. Arrange

SELECTSIMILAR

When using the _____ command, AutoCAD selects all objects in the drawing that match certain properties of objects you select. a. QSELECT c. MSELECT b. SELECTALL d. SELECTSIMILAR

True

You can use the FILLET command to draw a full round between parallel lines.

Implied

You can use the FILLET command to extend, or close, nonparallel and nonintersecting polylines to the _____ intersection. a. indirect c. indicated b. implicit d. implied

Grips

____ are small boxes that appear at strategic points on a selected object, allowing you to edit the object directly. a. Holds c. Controls b. Handles d. Grips

Properites

_____ include geometry characteristics, such as the coordinates of the endpoints of a line in X,Y,Z space, the diameter of a circle, or the area of a rectangle. a. Assets c. Traits b. Properties d. Features


Ensembles d'études connexes

History 1850 cumulative review 1

View Set

WellCare Re-Cert Exam 2023 Study Set

View Set

Music Appreciation - Unit 1 POP music

View Set