OSHA 30 Module 20 Process Safety Management

Employers must certify that they have carefully applied all the applicable provisions of the PSM standards at least every_____.

3 years

Catastrophic releases of hazardous chemicals must be investigated within:

48 hours

Information on the equipment in the process, as spelled out in 1910.119 and 1926.64(d)(3), must include all of the following EXCEPT:

An operator's guide

OSHA provides rules regarding information on the technology of the process which must include all of the following EXCEPT:

Reactivity and thermal data

When operating procedures are affected by recommendations of the process hazard analysis team, the employer's must important responsibility is:

Communicating changes to employees

Safe work practices should be developed for the control of hazards in all these operations EXCEPT:

Evacuating hazardous areas

In order to comply with OSHA's Mechanical Integrity standards, operating employers must assure that equipment as it is _____ is suitable for the desired process

Fabricated

To assure that a process hazard analysis is consistent with the current process, it should be updated and revalidated at least every _____ years

Five

Which one of these methods IS NOT used to determine and evaluate process hazards?

If-then analysis

In cases where equipment deficiencies are outside acceptable limits as defined by the safety management process, that equipment:

May be used so long as deficiencies are corrected in a timely manner