OSHA 30 Module 20 Process Safety Management

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

Employers must certify that they have carefully applied all the applicable provisions of the PSM standards at least every_____.

3 years

Catastrophic releases of hazardous chemicals must be investigated within:

48 hours

Information on the equipment in the process, as spelled out in 1910.119 and 1926.64(d)(3), must include all of the following EXCEPT:

An operator's guide

OSHA provides rules regarding information on the technology of the process which must include all of the following EXCEPT:

Reactivity and thermal data

When operating procedures are affected by recommendations of the process hazard analysis team, the employer's must important responsibility is:

Communicating changes to employees

Safe work practices should be developed for the control of hazards in all these operations EXCEPT:

Evacuating hazardous areas

In order to comply with OSHA's Mechanical Integrity standards, operating employers must assure that equipment as it is _____ is suitable for the desired process

Fabricated

To assure that a process hazard analysis is consistent with the current process, it should be updated and revalidated at least every _____ years

Five

Which one of these methods IS NOT used to determine and evaluate process hazards?

If-then analysis

In cases where equipment deficiencies are outside acceptable limits as defined by the safety management process, that equipment:

May be used so long as deficiencies are corrected in a timely manner


संबंधित स्टडी सेट्स

Respiratory acidosis and alkalosis

View Set

Ciencias sociales👉🏾 Geografía

View Set

CPIM 8.0- Module 1- Strategic Scope and Objectives

View Set