Q1 DRAFTING PERIODICAL

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

PS: A7

105mm x 74mm

PS: A6

148mm x 105mm

PS: A5

210mm x 148mm

PS: A4

210mm x 297mm

PS: A3

297mm x 420mm

-60 DEGREES

300 degrees is the same as ____ in a drawing

KFK: F4

3D Object Snap

PS: A2

420mm x 594mm

PS: A1

594mm x 841mm

PS: A8

74mm x 52mm

PS: A0

841mm x 1189 mm

IN A CIRCULAR PATTERN

A polar array creates new objects ___

CS: ARC

ARC

CS: CIRCLE

C

CS: COPY

CO

TRUE

Copy command also creates multiple copies of an object

F5 ISOPLANE

Cycles through 2D isoplane settings

F1 HELP

Displays Help for the active tooltip, command, palette, or dialog box

F2 EXPANDED HISTORY

Displays an expanded command history in the Command window

F12 DYNAMIC INPUT

Displays distances and angles near the cursor and accepts input as you use Tab between fields

KFK: F12

Dynamic Input

KFK: F6

Dynamic UCS

CS: ERASE

E

CS: EXTEND

EX

KFK: F2

Expanded History

CS: FILLET

F

KFK: F7

Grid Display

KFK: F9

Grid Snap

F10 POLAR TRACKING

Guides cursor movement to specified angles

KFK: F1

Help

RIGHT CLICK AND CHOOSE QUICK PROPERTIES/PROPERTIES

How can you change an object's properties?

AS MANY AS ARE NEEDED

How many layers should a drawing have?

TRUE

If you copy and paste text from another drawing or insert a block into a drawing that has the same Text Style name with different properties, the text properties of the host drawing will take precedence.

DOWN

If you draw a line at 270 degrees, it will point?

KFK: F5

Isoplane

CTRL + Z

Keystroke that will undo a command

F8 ORTHO

Locks cursor movement to horizontal or vertical

CS: MOVE

M

CS: OFFSET

O

KFK: F3

Object Snap

KFK: F11

Object Snap Tracking

ANY ACTIVE OSNAP

Object tracking works only with _____

KFK: F8

Ortho

CS: POLYGON

POL

MOVE AROUND THE DRAWING AT THE SAME SCALE

Panning allows you to....

KFK: F10

Polar Tracking

ANGLED LINES

Polar coordinates are used mostly for drawing...?

CS: ROTATE

RO

F9 GRID SNAP

Restricts cursor movement to specified grid intervals

EITHER BIGGER AND SMALLER

Scaling objects makes them ___

CS: TRIM

TR

DWG

The default file extension of an AutoCAD drawing

BOTH ROUND AND SHARP CORNERS

The fillet command creates ____

Z

To invoke the Zoom command transparently, type ____

F11 OBJECT SNAP TRACKING

Tracks the cursor horizontally and vertically from object snap locations

F3 OBJECT SNAP

Turn objects snap on and off

F4 3D OBJECT SNAP

Turns additional object snaps for 3D on and off

F6 DYNAMIC UCS

Turns automatic UCS alignment with planar surfaces on and off

F7 GRID DISPLAY

Turns the grid display on and off

THE CUTTING EDGES

Using trim command, which do you select first?

SHARP CORNER

What happens if you fillet these two lines with radius 0?

USING THE RECTANGLE COMMAND

What is the best way of drawing a rectangle?

THE COMMAND LINE

What should you pay close attention to when learning AutoCAD?

Z-AXIS

When drawing 2D, what axis do you not work with?

TRUE

When you explode (x) a block, the geometry returns to its original properties.

SCALE

Which command is used to change the size of existing objects?

APPROXIMATE

Which is NOT a way to enter coordinates in AutoCad

NEXT

Which is not a valid Zoom option?

TO BE MORE ACCURATE

Why should you use the Zoom tools?

TRUE

You cannot fillet or chamfer the first segment of a polyline with the last segment of the same polyline.


Ensembles d'études connexes

Sociology your compass for a New world: Chapters 3,4,6,7,8 TERMS and QUESTIONS

View Set

Cell bio chapter 26 homework, ch 24 mb, Chapter 23, Chapter 24, chapter 26, Mastering Biology ch26, Cell Biology Chapter 24

View Set

2.1.II - Keystone Species & Biodiversity

View Set