Q1 DRAFTING PERIODICAL
PS: A7
105mm x 74mm
PS: A6
148mm x 105mm
PS: A5
210mm x 148mm
PS: A4
210mm x 297mm
PS: A3
297mm x 420mm
-60 DEGREES
300 degrees is the same as ____ in a drawing
KFK: F4
3D Object Snap
PS: A2
420mm x 594mm
PS: A1
594mm x 841mm
PS: A8
74mm x 52mm
PS: A0
841mm x 1189 mm
IN A CIRCULAR PATTERN
A polar array creates new objects ___
CS: ARC
ARC
CS: CIRCLE
C
CS: COPY
CO
TRUE
Copy command also creates multiple copies of an object
F5 ISOPLANE
Cycles through 2D isoplane settings
F1 HELP
Displays Help for the active tooltip, command, palette, or dialog box
F2 EXPANDED HISTORY
Displays an expanded command history in the Command window
F12 DYNAMIC INPUT
Displays distances and angles near the cursor and accepts input as you use Tab between fields
KFK: F12
Dynamic Input
KFK: F6
Dynamic UCS
CS: ERASE
E
CS: EXTEND
EX
KFK: F2
Expanded History
CS: FILLET
F
KFK: F7
Grid Display
KFK: F9
Grid Snap
F10 POLAR TRACKING
Guides cursor movement to specified angles
KFK: F1
Help
RIGHT CLICK AND CHOOSE QUICK PROPERTIES/PROPERTIES
How can you change an object's properties?
AS MANY AS ARE NEEDED
How many layers should a drawing have?
TRUE
If you copy and paste text from another drawing or insert a block into a drawing that has the same Text Style name with different properties, the text properties of the host drawing will take precedence.
DOWN
If you draw a line at 270 degrees, it will point?
KFK: F5
Isoplane
CTRL + Z
Keystroke that will undo a command
F8 ORTHO
Locks cursor movement to horizontal or vertical
CS: MOVE
M
CS: OFFSET
O
KFK: F3
Object Snap
KFK: F11
Object Snap Tracking
ANY ACTIVE OSNAP
Object tracking works only with _____
KFK: F8
Ortho
CS: POLYGON
POL
MOVE AROUND THE DRAWING AT THE SAME SCALE
Panning allows you to....
KFK: F10
Polar Tracking
ANGLED LINES
Polar coordinates are used mostly for drawing...?
CS: ROTATE
RO
F9 GRID SNAP
Restricts cursor movement to specified grid intervals
EITHER BIGGER AND SMALLER
Scaling objects makes them ___
CS: TRIM
TR
DWG
The default file extension of an AutoCAD drawing
BOTH ROUND AND SHARP CORNERS
The fillet command creates ____
Z
To invoke the Zoom command transparently, type ____
F11 OBJECT SNAP TRACKING
Tracks the cursor horizontally and vertically from object snap locations
F3 OBJECT SNAP
Turn objects snap on and off
F4 3D OBJECT SNAP
Turns additional object snaps for 3D on and off
F6 DYNAMIC UCS
Turns automatic UCS alignment with planar surfaces on and off
F7 GRID DISPLAY
Turns the grid display on and off
THE CUTTING EDGES
Using trim command, which do you select first?
SHARP CORNER
What happens if you fillet these two lines with radius 0?
USING THE RECTANGLE COMMAND
What is the best way of drawing a rectangle?
THE COMMAND LINE
What should you pay close attention to when learning AutoCAD?
Z-AXIS
When drawing 2D, what axis do you not work with?
TRUE
When you explode (x) a block, the geometry returns to its original properties.
SCALE
Which command is used to change the size of existing objects?
APPROXIMATE
Which is NOT a way to enter coordinates in AutoCad
NEXT
Which is not a valid Zoom option?
TO BE MORE ACCURATE
Why should you use the Zoom tools?
TRUE
You cannot fillet or chamfer the first segment of a polyline with the last segment of the same polyline.