SF 410 Final

On abrasive wheel machinery, the distance between the wheel and the adjustable tongue guard may never exceed __________________.

1/4 inch

Each hand-fed planer and jointer with horizontal head equipped with a cylindrical cutting head, the knife projection of which must not exceed __________ beyond the cylindrical body of the head.

1/8 inch

Atmospheres that contain a flammable component above what percent of its Lower Explosive Limit (LEL) are considered hazardous for confined space entry?

10%

The permissible exposure limits for exposure of liquefied petroleum gases are __________________ over an 8‐hour workday. 1000 PPM 50 PPM 100 PPM 10 PPM

1000 PPM

How many sections are required on an SDS? 4 sections 16 sections 11 sections 20 sections

16 Sections

Oxygen deficient atmosphere is anything below___________% 30 23.5 19 25

19

Cylinders of oxidizing gases, including oxygen must be stored at least __________ away from any flammable gas. 30 mins 5 feet 20 feet 90 mins

20 feet

Oxygen enriched atmosphere is anything above _____________ % . 25 30 19 23.5

23.5

If combustible materials are closer than ______________ to the cutting/welding operation, then a fire watcher is required.

35 feet

Any moving part of mechanical power-transmission apparatus (e.g., flywheels, belts, spindles, pulleys, gears, etc.) that is ____ or less above the floor or platform must be guarded.

7 feet

When the blades of a fan are less than ____ above the floor, the blades must be guarded.

7 feet

The frames and noncurrent-carrying metal parts of portable electric woodworking machinery operated at more than ______ volts to ground must be grounded.

90

Safety glasses should be approved and marked with: ANSI Z-87 ROW Y-78 LOTO W-40 NORM L-20

ANSI Z-87

Which of the following hazards is an example of a health hazard? Explosive High pressure Fire hazard Acute toxicity

Acute toxicity

Companies are required to: Provide certain types of PPE at no cost to the employee. Train employees on the use of PPE. Monitor and enforce the use of required PPE. All answers are correct

All answers are correct

Which of the following must be present on every label? All answers are correct Hazard pictogram(s) Supplier identification Signal words

All answers are correct

According to OSHA, safety footwear must meet standards set by ANSI and ................................ National Safety Council (NSC) National Fire Protection Association (NFPA) American Society for Testing and Materials (ASTM) International Chemical Workers Union (ICWU)

American Society for Testing and Materials (ASTM)

If more than one person is performing maintenance, who should lock and tag the equipment?

Everyone performing maintenance

An attendant may leave the area of the confined entry for brief periods.

F

Appropriate PPE is the first line of defense in machine guarding

F

A confined space always requires a permit to be entered.

False

A control circuit device, such as a push button, selector switch, or interlock, may be used as the sole means for de-energizing circuits or equipment.

False

An attendant can enter a permit space to help the employee inside the confined space without being relieved by another authorized attendant.

False

PPE protect workers from all occupational hazards True False

False

The first choice in addressing a safety hazard is to use the proper PPE. True False

False

Whether or not PPE should be worn is up to the individual and not the situation. True False

False

Workers are required to assess the workplace to determine if hazards that necessitate the use of PPE are present or are likely to be present only if an injury occurs. True False

False

Which of the following is NOT true about welding/cutting operations in confined spaces?

Gas cylinders and welding machines must be placed inside the confined space so as to limit hazardous exposures to others in the vicinity.

What does GHS Stand for? Global Health System Globally Harmonized System Global Health Strategies Good Health Safety

Globally Harmonized System

If the object to be welded or cut cannot be moved and if all the fire hazards in the vicinity of the welding/cutting operation cannot be removed, then what happens?

Guards must be used to confine the heat, sparks, and slag to protect employees from the fire hazards.

Which of the following statements is true of the pictograms on HCS labels? Consist of four bars that are color-coded as blue, red, yellow, and white to match hazard. Pictograms on HCS labels are identical to those used on DOT transport labels and may have various background colors. HCS pictograms are required and standardized red square-on-points with black hazard symbols and white backgrounds. All answers are correct

HCS pictograms are required and standardized red square-on-points with black hazard symbols and white backgrounds.

What type of injury can a helmet or hard hat protect against? Cuts and abrasions Head injuries from falling objects Respiratory problems Chemical exposure

Head injuries from falling objects

This is the HMIS or "Hazardous Material Identification System" label. What hazards do the blue, red, orange/yellow, and white bars refer to, respectively? Health, flammability, reactivity, and personal protection Reactivity, flammability, personal protection, and health Personal protection, reactivity, health, and flammability Flammability, health, reactivity, personal protection

Health, flammability, reactivity, and personal protection

Which of the following is NOT true about lockout/tagout procedures?

If 10 people or less will be using the machine or piece of equipment in question, the lockout/tagout procedure does not have to be in writing

The first step in Lockout Tagout is:

Inform the equipment operator

Eye and face protection selected for employee use must clearly identify the................................. OSHA standard Manufacturer Warranty Label Expiration Date

Manufacturer

All respiratory protection equipment must be approved by.............................. OSHA NFPA EPA NIOSH

NIOSH

Who can have the key to the locks for a Lockout Tagout?

Only the person placing the locks

Which of the following hazards is an example of a physical hazard? Oxidizer Chronic toxicity Exposure to carcinogen Acute toxicity

Oxidizer

Which of the following must be tested FIRST before an employee enters a confined space?

Oxygen content

Flammability is which type of hazard? Mutagenic Physical Health Carcinogenic

Physical

Training on one type of Forklift:

Qualifies the operator for that type of vehicle.

What should workers do if they discover that their PPE is damaged? Hide the damage and use it as long as possible Continue using it until it fails completely Report it immediately to the safety manager Report it immediately to their supervisor and do not use it until repaired or replaced

Report it immediately to their supervisor and do not use it until repaired or replaced

Under the requirements of the GHS system, manufacturers will transmit information about hazardous chemicals through: Safety Data Sheets Material Safety Data Sheets OSHA Chemical Safety and Hazard Investigation Board

SDS

If you are driving behind a very slow forklift:

Stay about 3 truck lengths behind it.

The use of continuous forced air ventilation can be used to eliminate potential and actual atmospheric hazards.

T

PPE related training must cover the following items except: How to properly don, doff, adjust, wear, maintain and dispose of PPE When and what kind of PPE is necessary The limitations of the PPE The brand name of the PPE

The brand name of the PPE

The truck is less stable with a raised load because:

The center of gravity shifts when the load is raised.

It is the responsibility of _________________ to ensure that all machinery is properly guarded.

The employer

What is the difference between a guard and a safety device?

The guard is a physical barrier that prevents access to danger areas; the device prevents contact with points of operation by interrupting normal operation of the machine.

Employers can create their own workplace label if _____________________ They are made with bright colors Contain no words They provide employees with the same general information about the hazards of the chemical A safety consultant creates it.

They provide employees with the same general information about the hazards of the chemical

Which of the following is a standard precaution for workers exposed to bloodborne pathogens?

Treat all blood and bodily fluids of patients as potentially infectious materials

Companies must provide, at no cost to the worker, the initial issue of the type of PPE that is suitable for the work to be performed. True False

True

Safety glasses used in conjunction with a face‐shield provide the greatest level of protection when using grinding equipment. True False

True

When should PPE be used? When a worker feels like it Only when it's comfortable Only during official safety inspections Whenever there is a risk of exposure to hazards

Whenever there is a risk of exposure to hazards

PPE is Required: When the employee has less than five years experience Where there is an exposure to hazardous conditions or where it has been determined that a hazard exists When it's raining When on a jobsite

Where there is an exposure to hazardous conditions or where it has been determined that a hazard exists

The point of operation is _____________________________.

Where work is performed on the material

For how long must a fire watch be maintained after completion of welding or cutting?

at least 30 minutes

Lockout/tagout devices must be standardized in _________________ with in the facility.

color, size, or shape

How often should operators inspect their forklifts, at a minimum?

each shift

When you transfer a chemical into a secondary container, but end up not using it immediately and/or completely, you should ______________________________________________________ place the container in a fireproof chemical storage cabinet. empty the container. Place a "danger do not use" tag on the container. ensure that the secondary container gets properly labeled.

ensure that the secondary container gets properly labeled.

A forklift operator must have an evaluation at least:

every three years

Only the person performing the welding operation must be provided with eye protection; helpers, attendants, and others in the vicinity must be instructed to not look at the welding operation when it is in progress.

false

A vaccine is only available for which of the following major bloodborne pathogen viruses?

hep B

The most common route of entry by which hazardous materials are introduced into the body is ___________ ingestion injection absorption inhalation

inhalation

Hepatitis B is an inflammation of which body organ?

liver

Pictograms on a GHS safety data sheet or label are _________________________________ pictures of chemical hazards. graphics of hazardous chemicals. All answers are correct symbols that give you specific information about chemical hazards.

symbols that give you specific information about chemical hazards.

In the event of an exposure incident, which following action should be taken first?

wash the area thoroughly

How often should PPE be inspected before use? At least once a year Never, PPE doesn't need inspection Only when it looks damaged Before each use

Before each use

Who is responsible for maintaining PPE? Employers Both Workers & Employers Workers Supervisor

Both Workers & Employers

Which of the following classes of hard hats DO NOT provide any protection against electric hazards? Class B Class A Class D Class C

Class C

______________ are flammable gases or vapors are or may be present in the air in quantities sufficient to produce explosive or ignitable mixtures. Class III Locations Class II Locations Class IV Locations Class I Locations

Class I Locations

______________________ are areas where combustible dust, rather than gases or liquids, may be present in varying hazardous concentrations. Class III Class II Class I Class IV

Class II

A/An _________________ needs to evaluate the work site and identify confined spaces, including permit spaces.

Competent person

For machine guards to be effective, they must ______________.

Create no new hazards

What steps must an employer take after determining that the workplace has permit required confined entry areas?

Develop and implement a written program

Which of the following is the preferred order of controlling hazards, or "hierarchy of controls," for hazardous materials? Administrative Controls, Engineering Controls, Elimination, PPE Elimination, Engineering Controls, Administrative Controls, PPE PPE, Administrative Controls, Engineering Controls, Elimination Engineering Controls, Elimination, PPE, Administrative Controls

Elimination, Engineering Controls, Administrative Controls, PPE

Which of the following hazard controls is an example of an engineering control? Implementing a procedure for the proper use of a hazardous material Enclosing an operation to prevent contact with the hazardous material Requiring personal protective equipment to be worn when working with a hazardous material Training employees on the proper handling and storage of a hazardous material

Enclosing an operation to prevent contact with the hazardous material

Personal Protective Equipment is required when: An employee asks for it The employees suffer an injury Employers suffer an injury Engineering, work practice, and administrative controls do not provide sufficient protection against hazards

Engineering, work practice, and administrative controls do not provide sufficient protection against hazards

Which pictogram is not regulated by OSHA but may be used to provide additional information? Skull and Crossbones Environment Health Hazard Exploding Bom

Environment