S/P2 Automotive Service Safety
The P.A.S.S. technique on a fire extinguisher stands for ________.
Pull, aim, squeeze, sweep
OSHA ensures that employees have the right to:
Receive information and training on workplace hazards
Gold and silver rings can receive an arc and turn molten.
True
CNG containers need to be inspected _________.
After the vehicle is involved in an accident or fire
A first aid kit should include the following items:
All of above
Chemical manufacturers must present which information on the product's label?
All of above
Workers can be exposed to blood or other potentially infectious materials (OPIM) if it splashes into their _____.
All of above
Follow lockout/tagout procedures in this situation:
All of the above
These are examples of foot and leg protection:
All of the above
This can change the fit of your respirator.
All of the above
This is a classification of back pain based on duration.
All of the above
This material is considered flammable.
All of the above
This type of welding equipment is commonly used in automotive shops.
All of the above
You should ______ when working with power tools.
All of the above
__________ is an example of an electrical device.
All of the above
_____________ is one way to prevent injuries when jump starting a car.
All of the above
Coming into contact with another person's blood increases your chances of contracting a disease.
true
There are some sections of the SDS that are not mandatory.
true
___________ poses the greatest risk to workers because it is more common and more easily transmitted than other bloodborne diseases.
Hepatitis B Virus (HBV)
Only __________ should perform CPR on an accident victim.
Individuals certified in CPR
If you see an employee performing their job task in an unsafe way you should ___________.
Inform the employee it is unsafe and demonstrate how to do it safely
A 250-pound person would use a Type 1 ladder even if he were carrying a load with him.
False
A conventional 12-volt battery is not found in most hybrid vehicles.
False
A local reaction is when a chemical enters the bloodstream.
False
A negative pressure respirator brings fresh air to you through a hose.
False
A plumbed eyewash station is portable.
False
Acetylene gas is not explosive.
False
Eating around chemicals in the workplace is considered safe because today's chemicals are more diluted than in the past.
False
Employees are not responsible for their own safety while at work.
False
GFCI stands for Ground Fault Circuit Interference.
False
If wearing protective gloves, there's no need to wash your hands after exposure to blood.
False
If your PPE doesn't fit properly or needs repair, you should continue to wear it until your employer gets around to buying new PPE.
False
It is acceptable to have blocked walkways along a fire exit route as long as the sign is still visible.
False
It's OK to use a jack or lift without being trained because they are easy to use.
False
No matter how many employees you have, the fire prevention plan needs to be in writing.
False
Single-use earplugs require a professional fitting before they can be used.
False
Static holding is when you hold the same posture for long periods of time.
False
The safety risks are the same for technicians who work on hybrid electric vehicles (HEVs) or EVs as those who work on conventional gasoline vehicles.
False
You don't have to notify employees that a lockout/tagout is about to begin.
False
You don't need to use a jack stand with a hydraulic jack or lift.
False
You should always squeeze your eyes shut when a chemical splashes into them.
False
You should hold your fingers on the power switch when holding a plugged-in power tool.
False
You should never use a jack without a _________ underneath it.
Stand
If an employee will be locking and tagging, then it is required for them to participate in the lockout/tagout training provided by their employer.
True
In addition to having a first aid kit, OSHA recommends that shop owners also have an automated external defibrillator (AED) nearby to be used in case of an emergency.
True
Injuries from work-related falls can affect employees by resulting in time off and medical costs.
True
It is always the employee's responsibility to make sure they wear their respirator.
True
When choosing a respirator for your job, you must conduct a _____ test.
Fit
Jump-starting allows you to start an engine with either a weak or discharged battery by connecting it to another vehicle's battery using jumper/booster cables.
True
Liquefied Natural Gas (LNG) is a natural gas in its liquid form that is clear, colorless, odorless, non-corrosive, and non-toxic.
True
Lockout/tagout (LOTO) is a safety procedure that ensures dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.
True
Many jacks use hydraulic power.
True
Many states require drivers to use hands-free cell phones only.
True
Potential eye injuries are one hazard of using GMAW equipment.
True
Repetitive movements at work can lead to injuries.
True
Respirators should be worn when there is hazardous air pollution in the workplace.
True
Safety and environmental training is important in keeping employees safe and free from injuries and illness.
True
The Hazard Communication Standard (HCS) is also known as the "right to know" law.
True
The batteries on electric vehicles are recharged using electricity from either a wall socket or dedicated charging unit.
True
The proper use of Personal Protective Equipment (PPE) helps prevent workplace injuries.
True
The proper way to unplug a cord is to pull on the plug and not the cord.
True
The term for a vindictive type of aggressive driving is road rage.
True
Training is an important way to keep yourself and others safe while at work.
True
Twisting your body and overreaching when trying to access an item on a tall shelf are common ways that you can injure yourself.
True
When drilling metal, use cutting oil to lubricate it.
True
You should always check your fuel level before beginning a test drive.
True
You should use the P.A.S.S. technique when operating a fire extinguisher.
True
Electricians will sometimes call ______ "disconnects" or a "disconnecting means."
Switches
All eyewash stations must contain enough water to provide for _____ minutes of continuous use.
15
When working with HEVs and EVs, you must create a _______ perimeter or buffer zone around the work area that does not have any metal objects.
3-foot
Toeboards are usually ___ inches high and used on landings and balconies.
4
A skull and crossbones pictogram indicates this kind of information about a chemical.
Acute Toxicity
Which employees should be aware of how to turn off power to a shop in an emergency?
All workers should know how to turn the power off in an emergency.
Which of these is NOT one of the four A's of defensive driving.
Anxiety
Proper ventilation is required when welding, so that you don't ____________.
Breathe in dangerous fumes
Always do this before driving anywhere.
Buckle your seatbelt
_________ gloves are made from a synthetic rubber and provide protection from a variety of chemicals such as peroxide and highly corrosive acids.
Butyl
The term route of entry on an SDS refers to the way a ____ enters the body.
Chemical
Dust, dirt, or metal chips can pose a potential ____ injury risk in a shop.
Eye
CNG is a readily available alternative to _________.
Gasoline
_________ are a tight-fitting form of PPE that covers the eyes and provides protection from impact, dust, and splashes.
Goggles
In order to avoid slipping in the shop, your footwear should ___________.
Have proper tread
If a machine guard is missing or needs repair, you should ______________.
Immediately remove that machine from service
You should _______ an eyewash station periodically.
Inspect
___________ is NOT a common injury that an automotive tech may experience at work.
Jaw pain
You should wear this type of glove to protect yourself from electrical sparks.
Leather gloves
Which of these is NOT a safety procedure for lockout/tagout?
Leaving the equipment on
______________ help protect the lower legs and feet from heat hazards like molten metal and welding sparks.
Leggings
Fire extinguishers need to be checked _______ to make sure they are working properly.
Monthly
It is acceptable to use a jack that has been ____________.
None of the above
When jump starting a car, make sure it is in __________.
Park or neutral
When jump-starting a car, always remember ___________.
Positive to positive, negative to ground
Engineering controls are the physical changes that employers make to the work environment or to equipment that make it safer to use.
True
A retractable service pit cover can help other shop employees from falling into the pit while another technician is in the pit servicing a car.
True
A second-degree burn may develop blisters.
True
A technician can be electrocuted when working on HEVs or EVs.
True
A third-degree burn may look charred and black or dry and white.
True
An eyewash station needs to be located no more than 10 seconds or less than 55 feet away from a work area.
True
Employees should use a disinfectant when cleaning up a surface contaminated by blood.
True
Employees should wear approved eye protection and proper clothing when using hand tools.
True
