S/P2 Automotive Service Safety

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

The P.A.S.S. technique on a fire extinguisher stands for ________.

Pull, aim, squeeze, sweep

OSHA ensures that employees have the right to:

Receive information and training on workplace hazards

Gold and silver rings can receive an arc and turn molten.

True

CNG containers need to be inspected _________.

After the vehicle is involved in an accident or fire

A first aid kit should include the following items:

All of above

Chemical manufacturers must present which information on the product's label?

All of above

Workers can be exposed to blood or other potentially infectious materials (OPIM) if it splashes into their _____.

All of above

Follow lockout/tagout procedures in this situation:

All of the above

These are examples of foot and leg protection:

All of the above

This can change the fit of your respirator.

All of the above

This is a classification of back pain based on duration.

All of the above

This material is considered flammable.

All of the above

This type of welding equipment is commonly used in automotive shops.

All of the above

You should ______ when working with power tools.

All of the above

__________ is an example of an electrical device.

All of the above

_____________ is one way to prevent injuries when jump starting a car.

All of the above

Coming into contact with another person's blood increases your chances of contracting a disease.

true

There are some sections of the SDS that are not mandatory.

true

___________ poses the greatest risk to workers because it is more common and more easily transmitted than other bloodborne diseases.

Hepatitis B Virus (HBV)

Only __________ should perform CPR on an accident victim.

Individuals certified in CPR

If you see an employee performing their job task in an unsafe way you should ___________.

Inform the employee it is unsafe and demonstrate how to do it safely

A 250-pound person would use a Type 1 ladder even if he were carrying a load with him.

False

A conventional 12-volt battery is not found in most hybrid vehicles.

False

A local reaction is when a chemical enters the bloodstream.

False

A negative pressure respirator brings fresh air to you through a hose.

False

A plumbed eyewash station is portable.

False

Acetylene gas is not explosive.

False

Eating around chemicals in the workplace is considered safe because today's chemicals are more diluted than in the past.

False

Employees are not responsible for their own safety while at work.

False

GFCI stands for Ground Fault Circuit Interference.

False

If wearing protective gloves, there's no need to wash your hands after exposure to blood.

False

If your PPE doesn't fit properly or needs repair, you should continue to wear it until your employer gets around to buying new PPE.

False

It is acceptable to have blocked walkways along a fire exit route as long as the sign is still visible.

False

It's OK to use a jack or lift without being trained because they are easy to use.

False

No matter how many employees you have, the fire prevention plan needs to be in writing.

False

Single-use earplugs require a professional fitting before they can be used.

False

Static holding is when you hold the same posture for long periods of time.

False

The safety risks are the same for technicians who work on hybrid electric vehicles (HEVs) or EVs as those who work on conventional gasoline vehicles.

False

You don't have to notify employees that a lockout/tagout is about to begin.

False

You don't need to use a jack stand with a hydraulic jack or lift.

False

You should always squeeze your eyes shut when a chemical splashes into them.

False

You should hold your fingers on the power switch when holding a plugged-in power tool.

False

You should never use a jack without a _________ underneath it.

Stand

If an employee will be locking and tagging, then it is required for them to participate in the lockout/tagout training provided by their employer.

True

In addition to having a first aid kit, OSHA recommends that shop owners also have an automated external defibrillator (AED) nearby to be used in case of an emergency.

True

Injuries from work-related falls can affect employees by resulting in time off and medical costs.

True

It is always the employee's responsibility to make sure they wear their respirator.

True

When choosing a respirator for your job, you must conduct a _____ test.

Fit

Jump-starting allows you to start an engine with either a weak or discharged battery by connecting it to another vehicle's battery using jumper/booster cables.

True

Liquefied Natural Gas (LNG) is a natural gas in its liquid form that is clear, colorless, odorless, non-corrosive, and non-toxic.

True

Lockout/tagout (LOTO) is a safety procedure that ensures dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.

True

Many jacks use hydraulic power.

True

Many states require drivers to use hands-free cell phones only.

True

Potential eye injuries are one hazard of using GMAW equipment.

True

Repetitive movements at work can lead to injuries.

True

Respirators should be worn when there is hazardous air pollution in the workplace.

True

Safety and environmental training is important in keeping employees safe and free from injuries and illness.

True

The Hazard Communication Standard (HCS) is also known as the "right to know" law.

True

The batteries on electric vehicles are recharged using electricity from either a wall socket or dedicated charging unit.

True

The proper use of Personal Protective Equipment (PPE) helps prevent workplace injuries.

True

The proper way to unplug a cord is to pull on the plug and not the cord.

True

The term for a vindictive type of aggressive driving is road rage.

True

Training is an important way to keep yourself and others safe while at work.

True

Twisting your body and overreaching when trying to access an item on a tall shelf are common ways that you can injure yourself.

True

When drilling metal, use cutting oil to lubricate it.

True

You should always check your fuel level before beginning a test drive.

True

You should use the P.A.S.S. technique when operating a fire extinguisher.

True

Electricians will sometimes call ______ "disconnects" or a "disconnecting means."

Switches

All eyewash stations must contain enough water to provide for _____ minutes of continuous use.

15

When working with HEVs and EVs, you must create a _______ perimeter or buffer zone around the work area that does not have any metal objects.

3-foot

Toeboards are usually ___ inches high and used on landings and balconies.

4

A skull and crossbones pictogram indicates this kind of information about a chemical.

Acute Toxicity

Which employees should be aware of how to turn off power to a shop in an emergency?

All workers should know how to turn the power off in an emergency.

Which of these is NOT one of the four A's of defensive driving.

Anxiety

Proper ventilation is required when welding, so that you don't ____________.

Breathe in dangerous fumes

Always do this before driving anywhere.

Buckle your seatbelt

_________ gloves are made from a synthetic rubber and provide protection from a variety of chemicals such as peroxide and highly corrosive acids.

Butyl

The term route of entry on an SDS refers to the way a ____ enters the body.

Chemical

Dust, dirt, or metal chips can pose a potential ____ injury risk in a shop.

Eye

CNG is a readily available alternative to _________.

Gasoline

_________ are a tight-fitting form of PPE that covers the eyes and provides protection from impact, dust, and splashes.

Goggles

In order to avoid slipping in the shop, your footwear should ___________.

Have proper tread

If a machine guard is missing or needs repair, you should ______________.

Immediately remove that machine from service

You should _______ an eyewash station periodically.

Inspect

___________ is NOT a common injury that an automotive tech may experience at work.

Jaw pain

You should wear this type of glove to protect yourself from electrical sparks.

Leather gloves

Which of these is NOT a safety procedure for lockout/tagout?

Leaving the equipment on

______________ help protect the lower legs and feet from heat hazards like molten metal and welding sparks.

Leggings

Fire extinguishers need to be checked _______ to make sure they are working properly.

Monthly

It is acceptable to use a jack that has been ____________.

None of the above

When jump starting a car, make sure it is in __________.

Park or neutral

When jump-starting a car, always remember ___________.

Positive to positive, negative to ground

Engineering controls are the physical changes that employers make to the work environment or to equipment that make it safer to use.

True

A retractable service pit cover can help other shop employees from falling into the pit while another technician is in the pit servicing a car.

True

A second-degree burn may develop blisters.

True

A technician can be electrocuted when working on HEVs or EVs.

True

A third-degree burn may look charred and black or dry and white.

True

An eyewash station needs to be located no more than 10 seconds or less than 55 feet away from a work area.

True

Employees should use a disinfectant when cleaning up a surface contaminated by blood.

True

Employees should wear approved eye protection and proper clothing when using hand tools.

True


Set pelajaran terkait

EMT Chapter 39 Vehicle Extrication and Special Rescue

View Set

Chapter 5: Understanding Nutrition

View Set

medsurg ch 61 Concepts of Care for Patients With Urinary Problems

View Set

Chapter 9 - Financial Planning and Analysis

View Set

Anatomy & Physiology Part 2 Exam 1

View Set