S/P2 The Importance of Workplace Safety ( all quiz+ tests)

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

When choosing a respirator for your job, you must conduct a _____ test.

fit

You should _______ an eyewash station periodically.

inspect

Follow lockout/tagout procedures in this situation:

All of the above

This can change the fit of your respirator.

All of the above

OSHA ensures that employees have the right to:

Receive information and training on workplace hazards

A retractable service pit cover can help other shop employees from falling into the pit while another technician is in the pit servicing a car.

true

A second-degree burn may develop blisters.

true

A technician can be electrocuted when working on HEVs or EVs.

true

A third-degree burn may look charred and black or dry and white.

true

An eyewash station needs to be located no more than 10 seconds or less than 55 feet away from a work area

true

Coming into contact with another person's blood increases your chances of contracting a disease.

true

Employees should use a disinfectant when cleaning up a surface contaminated by blood.

true

Employees should wear approved eye protection and proper clothing when using hand tools.

true

Engineering controls are the physical changes that employers make to the work environment or to equipment that make it safer to use.

true

Gold and silver rings can receive an arc and turn molten.

true

If an employee will be locking and tagging, then it is required for them to participate in the lockout/tagout training provided by their employer.

true

In addition to having a first aid kit, OSHA recommends that shop owners also have an automated external defibrillator (AED) nearby to be used in case of an emergency.

true

Injuries from work-related falls can affect employees by resulting in time off and medical costs.

true

It is always the employee's responsibility to make sure they wear their respirator.

true

Jump-starting allows you to start an engine with either a weak or discharged battery by connecting it to another vehicle's battery using jumper/booster cables.

true

Lockout/tagout (LOTO) is a safety procedure that ensures dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.

true

Many jacks use hydraulic power.

true

Potential eye injuries are one hazard of using GMAW equipment.

true

Respirators should be worn when there is hazardous air pollution in the workplace.

true

Safety and environmental training is important in keeping employees safe and free from injuries and illness.

true

The Hazard Communication Standard (HCS) is also known as the "right to know" law.

true

The batteries on electric vehicles are recharged using electricity from either a wall socket or dedicated charging unit.

true

The proper way to unplug a cord is to pull on the plug and not the cord.

true

There are some sections of the SDS that are not mandatory.

true

Training is an important way to keep yourself and others safe while at work.

true

When drilling metal, use cutting oil to lubricate it.

true

You should use the P.A.S.S. technique when operating a fire extinguisher.

true

___________ poses the greatest risk to workers because it is more common and more easily transmitted than other bloodborne diseases.

Hepatitis B Virus (HBV)

Only __________ should perform CPR on an accident victim.

Individuals certified in CPR

If you see an employee performing their job task in an unsafe way you should ___________

Inform the employee it is unsafe and demonstrate how to do it safely

If your PPE doesn't fit properly or needs repair, you should continue to wear it until your employer gets around to buying new PPE.

False

Single-use earplugs require a professional fitting before they can be used.

False

The proper use of Personal Protective Equipment (PPE) helps prevent workplace injuries.

True

A 250-pound person would use a Type 1 ladder even if he were carrying a load with him.

false

A conventional 12-volt battery is not found in most hybrid vehicles.

false

All eyewash stations must contain enough water to provide for _____ minutes of continuous use.

15

A local reaction is when a chemical enters the bloodstream

false

A negative pressure respirator brings fresh air to you through a hose.

false

A plumbed eyewash station is portable.

false

Acetylene gas is not explosive.

false

Eating around chemicals in the workplace is considered safe because today's chemicals are more diluted than in the past.

false

Toeboards are usually ___ inches high and used on landings and balconies.

4

Employees are not responsible for their own safety while at work.

false

GFCI stands for Ground Fault Circuit Interference.

false

If wearing protective gloves, there's no need to wash your hands after exposure to blood.

false

It's OK to use a jack or lift without being trained because they are easy to use..

false

No matter how many employees you have, the fire prevention plan needs to be in writing.

false

When working with HEVs and EVs, you must create a _______ perimeter or buffer zone around the work area that does not have any metal objects.

3 foot

Which employees should be aware of how to turn off power to a shop in an emergency?

All workers should know how to turn the power off in an emergency

You don't have to notify employees that a lockout/tagout is about to begin.

false

You don't need to use a jack stand with a hydraulic jack or lift

false

Proper ventilation is required when welding, so that you don't _________

Breathe in dangerous fumes

_________ gloves are made from a synthetic rubber and provide protection from a variety of chemicals such as peroxide and highly corrosive acids.

Butyl

You should always squeeze your eyes shut when a chemical splashes into them.

false

You should hold your fingers on the power switch when holding a plugged-in power tool.

false

Dust, dirt, or metal chips can pose a potential ____ injury risk in a shop.

Eye

_________ are a tight-fitting form of PPE that covers the eyes and provides protection from impact, dust, and splashes.

Goggles

In order to avoid slipping in the shop, your footwear should ___________.

Have proper tread

If a machine guard is missing or needs repair, you should ______________.

Immediately remove that machine from service

Which of these is NOT a safety procedure for lockout/tagout?

Leaving the equipment on

When jump starting a car, make sure it is in __________.

Neutral or Park

When jump-starting a car, always remember __________

Positive to positive, negative to ground

it is acceptable to have blocked walkways along a fire exit route as long as the sign is still visible.

false

____________ help protect the lower legs and feet from heat hazards like molten metal and welding sparks.

Toe guards

skull and crossbones pictogram indicates this kind of information about a chemical.

acute toxicity

A first aid kit should include the following items:

all the above

Chemical manufacturers must present which information on the product's label?

all the above

These are examples of foot and leg protection:

all the above

This material is considered flammable.

all the above

This type of welding equipment is commonly used in automotive shops.

all the above

Workers can be exposed to blood or other potentially infectious materials (OPIM) if it splashes into their _____.

all the above

You should ______ when working with power tools.

all the above

_________ is an example of an electrical device.

all the above

_____________ is one way to prevent injuries when jump starting a car.

all the above

The term route of entry on an SDS refers to the way a ____ enters the body.

chemical

Fire extinguishers need to be checked _______ to make sure they are working properly.

monthly

It is acceptable to use a jack that has been _________

none of the above

CNG is a readily available alternative to _________.

oil

You should never use a jack without a _________ underneath it.

stand

Electricians will sometimes call ______ "disconnects" or a "disconnecting means."

switches


Ensembles d'études connexes

INS 102 : Chapter 5 : international Trade

View Set

What is Human communication? Vocabulary

View Set

Global Geography Book Questions exam 1, geog 100

View Set

Cyber Awareness 2022 Knowledge Check

View Set