S/P2 The Importance of Workplace Safety ( all quiz+ tests)
When choosing a respirator for your job, you must conduct a _____ test.
fit
You should _______ an eyewash station periodically.
inspect
Follow lockout/tagout procedures in this situation:
All of the above
This can change the fit of your respirator.
All of the above
OSHA ensures that employees have the right to:
Receive information and training on workplace hazards
A retractable service pit cover can help other shop employees from falling into the pit while another technician is in the pit servicing a car.
true
A second-degree burn may develop blisters.
true
A technician can be electrocuted when working on HEVs or EVs.
true
A third-degree burn may look charred and black or dry and white.
true
An eyewash station needs to be located no more than 10 seconds or less than 55 feet away from a work area
true
Coming into contact with another person's blood increases your chances of contracting a disease.
true
Employees should use a disinfectant when cleaning up a surface contaminated by blood.
true
Employees should wear approved eye protection and proper clothing when using hand tools.
true
Engineering controls are the physical changes that employers make to the work environment or to equipment that make it safer to use.
true
Gold and silver rings can receive an arc and turn molten.
true
If an employee will be locking and tagging, then it is required for them to participate in the lockout/tagout training provided by their employer.
true
In addition to having a first aid kit, OSHA recommends that shop owners also have an automated external defibrillator (AED) nearby to be used in case of an emergency.
true
Injuries from work-related falls can affect employees by resulting in time off and medical costs.
true
It is always the employee's responsibility to make sure they wear their respirator.
true
Jump-starting allows you to start an engine with either a weak or discharged battery by connecting it to another vehicle's battery using jumper/booster cables.
true
Lockout/tagout (LOTO) is a safety procedure that ensures dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.
true
Many jacks use hydraulic power.
true
Potential eye injuries are one hazard of using GMAW equipment.
true
Respirators should be worn when there is hazardous air pollution in the workplace.
true
Safety and environmental training is important in keeping employees safe and free from injuries and illness.
true
The Hazard Communication Standard (HCS) is also known as the "right to know" law.
true
The batteries on electric vehicles are recharged using electricity from either a wall socket or dedicated charging unit.
true
The proper way to unplug a cord is to pull on the plug and not the cord.
true
There are some sections of the SDS that are not mandatory.
true
Training is an important way to keep yourself and others safe while at work.
true
When drilling metal, use cutting oil to lubricate it.
true
You should use the P.A.S.S. technique when operating a fire extinguisher.
true
___________ poses the greatest risk to workers because it is more common and more easily transmitted than other bloodborne diseases.
Hepatitis B Virus (HBV)
Only __________ should perform CPR on an accident victim.
Individuals certified in CPR
If you see an employee performing their job task in an unsafe way you should ___________
Inform the employee it is unsafe and demonstrate how to do it safely
If your PPE doesn't fit properly or needs repair, you should continue to wear it until your employer gets around to buying new PPE.
False
Single-use earplugs require a professional fitting before they can be used.
False
The proper use of Personal Protective Equipment (PPE) helps prevent workplace injuries.
True
A 250-pound person would use a Type 1 ladder even if he were carrying a load with him.
false
A conventional 12-volt battery is not found in most hybrid vehicles.
false
All eyewash stations must contain enough water to provide for _____ minutes of continuous use.
15
A local reaction is when a chemical enters the bloodstream
false
A negative pressure respirator brings fresh air to you through a hose.
false
A plumbed eyewash station is portable.
false
Acetylene gas is not explosive.
false
Eating around chemicals in the workplace is considered safe because today's chemicals are more diluted than in the past.
false
Toeboards are usually ___ inches high and used on landings and balconies.
4
Employees are not responsible for their own safety while at work.
false
GFCI stands for Ground Fault Circuit Interference.
false
If wearing protective gloves, there's no need to wash your hands after exposure to blood.
false
It's OK to use a jack or lift without being trained because they are easy to use..
false
No matter how many employees you have, the fire prevention plan needs to be in writing.
false
When working with HEVs and EVs, you must create a _______ perimeter or buffer zone around the work area that does not have any metal objects.
3 foot
Which employees should be aware of how to turn off power to a shop in an emergency?
All workers should know how to turn the power off in an emergency
You don't have to notify employees that a lockout/tagout is about to begin.
false
You don't need to use a jack stand with a hydraulic jack or lift
false
Proper ventilation is required when welding, so that you don't _________
Breathe in dangerous fumes
_________ gloves are made from a synthetic rubber and provide protection from a variety of chemicals such as peroxide and highly corrosive acids.
Butyl
You should always squeeze your eyes shut when a chemical splashes into them.
false
You should hold your fingers on the power switch when holding a plugged-in power tool.
false
Dust, dirt, or metal chips can pose a potential ____ injury risk in a shop.
Eye
_________ are a tight-fitting form of PPE that covers the eyes and provides protection from impact, dust, and splashes.
Goggles
In order to avoid slipping in the shop, your footwear should ___________.
Have proper tread
If a machine guard is missing or needs repair, you should ______________.
Immediately remove that machine from service
Which of these is NOT a safety procedure for lockout/tagout?
Leaving the equipment on
When jump starting a car, make sure it is in __________.
Neutral or Park
When jump-starting a car, always remember __________
Positive to positive, negative to ground
it is acceptable to have blocked walkways along a fire exit route as long as the sign is still visible.
false
____________ help protect the lower legs and feet from heat hazards like molten metal and welding sparks.
Toe guards
skull and crossbones pictogram indicates this kind of information about a chemical.
acute toxicity
A first aid kit should include the following items:
all the above
Chemical manufacturers must present which information on the product's label?
all the above
These are examples of foot and leg protection:
all the above
This material is considered flammable.
all the above
This type of welding equipment is commonly used in automotive shops.
all the above
Workers can be exposed to blood or other potentially infectious materials (OPIM) if it splashes into their _____.
all the above
You should ______ when working with power tools.
all the above
_________ is an example of an electrical device.
all the above
_____________ is one way to prevent injuries when jump starting a car.
all the above
The term route of entry on an SDS refers to the way a ____ enters the body.
chemical
Fire extinguishers need to be checked _______ to make sure they are working properly.
monthly
It is acceptable to use a jack that has been _________
none of the above
CNG is a readily available alternative to _________.
oil
You should never use a jack without a _________ underneath it.
stand
Electricians will sometimes call ______ "disconnects" or a "disconnecting means."
switches