Struck-By & Caught-Between Accidents

Workers are most at risk from falling objects when standing or working:

A, C, and D.

One who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them is a/n:

Competent person.

Providing worker training on the safe use of the equipment being operated is the responsibility of the:

Employer.

Approximately 75 percent of struck-by fatalities involve:

Heavy equipment, such as trucks or cranes.

If a machine has an exposed pulley and conveyor but the portion of it that is exposed is well underneath the machine, the employer:

Must ensure that all exposed and accessible sections of the machine are guarded.

Forklift operators should ground the forks of the forklift, turn the forklift of, set the parking brake, and ________________ prior to dismounting the machine.

Neutralize the controls.

To protect against caught-in or -between hazards, a worker should not only avoid wearing loose clothing or jewelry, but also a worker should avoid:

Performing maintenance or adjustment on equipment/machinery that has not been locked-out.

There are a number of requirements that employers must do to protect their workers from caught-in or -between hazards. Which of these is required if the worker's body, hands, or clothing may come into contact with moving parts?

Provide guards on power tools and other equipment with moving parts.

To prevent injury from flying debris, use safety glass, goggles, face shields, etc., where machines or tools may cause flying particles; and always inspect tools, such as saws and lathes, to ensure that:

The protective guards are in good condition and firmly attached.

It is preferable not to drive a vehicle in reverse if you have an obstructed rear view, but if you do, make sure:

The vehicle has an audible reverse alarm.