Test Out 3.8.8, 6.6.7 Testout CTI 130, Test Out 6.5.5, 6.4.4 Practice Questions, 6.3.6 Testout CTI 130, 6.2.7 Network Hardware, 6.1.7 Testout CTI 130, TestOut PC Pro 5.9.7, 5.8.5 Storage Space, TestOut PC Pro - 5.7.6 Practice Questions - (Storage Man...

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

You have been asked to implement a raid 5 solution for an engineers desktop workstation. What is the minimum number of hard disks taken me years to configure raid 5?

3

A user complains that his USB scanner no longer works. You check Device Manager and see an icon with a black down arrow on it. What should you do? Replace the device. Remove and then reinstall the device. Enable the device in Device Manager. Update the device drivers.

Enable the device in Device Manager.

What allows a device to request processing time from the CPU?

IRQ (Interrupt Request)

What is a method used by different system devices to interact with the CPU?

IRQ (Interrupt Request)

(3.3.6) Which of the following connectors are part of the system case and connect to header pins on the motherboard?(Select two)

Power switch HDD LED activity

Which of the following protocols carry phone calls over IP-based network?

VoIP

defrag

Which of the following Windows command line utilities would you use to realign the file structure on the disk to optimize performance? • Disk Management • fdisk • chkdsk • defrag

- Lower power requirements - No moving parts

Which of the following are advantages of solid state storage compared to hard drives? (Select two.) - Lower power requirements - Larger storage capacity - Inexpensive - No moving parts - Proprietary disk interface

1.) The wattage requirement for each individual circuit uses formula W=VxA 2.) The watt rating indicates how much power can be supplied to various devices.

Which of the following statements are true regarding power supply wattage?

Move the tabs holding the RAM out of the way; pull straight up to remove the RAM

Which of the following is the most common method for removing RAM from a motherboard?

the active partition must be a primary partition

Which of the following is true about primary partitions?

The network uses copper UTP cables The network operates at one gigabit per second.

Which of the following is true of a network using the 1000Base-T standard?

LEDs are used to backlight the screen

Which of the following is true of modern LCD monitors regarding backlighting?

Multi-core

Which of the following refers to placing two processors on a single processor chip or die?

USB 2.0

Which of the following standards provides data transfer rates up to 480 Mbps with a maximum cable length of 5 meters?

Single sided memory uses half the number of memory modules as double sided memory of the same capacity.

Which of the following statements is true regarding single and double-sided memory?

Contrast Ratio

Which of the following term describes the difference between white and black in an LCD monitor

chkdsk

Which of the following utilities checks the disk for bad clusters? • fdisk • format • defrag • chkdsk

chkdsk

Which of the following utilities would you use to correct cross-linked clusters within the file system on a Windows workstation? • fdisk • chkdsk • attrib • DiskScan

Match the fiber optic cables on the left with the appropriate characteristics on the right 1)Multi-mode 2) Single mode _____Data transfer through the core using more than one light rays. _____The core diameter is around 10 microns _____Cable lengths can extend a great distance _____Cable lengths are limited in distance

_1____Data transfer through the core using more than one light rays. __2___The core diameter is around 10 microns __2___Cable lengths can extend a great distance __1___Cable lengths are limited in distance

Type A

What type of USB 3.0 Connector is shown here?

Which of the following are not valid IP addresses? (Select THREE.)

257.0.122.55 45.22.156.256 145.8.260.7

- Hard disk drive (HDD) - Solid State Drive (SSD) - Optical Disk - Hard disk drive (HDD) - Solid State Drive (SSD) - Optical Disk

- A thick magnetic disk made of aluminum platters. Uses read/write heads to access data stored on the platters. (Hard disk drive (HDD)) - A flash device and storage capacity similar to a small hard drive. (Solid State Drive (SSD)) - Uses lasers to read and write information stored in the form of pits in their reflective coating. (Optical Disk) - Providesup to several terabytes in storage capacity, and cost per megabyte is very low. (Hard disk drive (HDD)) - Faster than other devices. No moving parts. Lasts longer than other storage devices. (Solid State Drive (SSD)) - Ideal for music and video. Portable and cheap with a long shelf life. (Optical Disk)

Which of the following are characteristics of coaxial network cable?(Select Two) A) it made of plastic or glass in the center of the cable, B) It has a conductor made from copper in the center of the cable C) It uses two concentric metallic conductors D) it is totally immune to electromagnetic interference E) the conductors within the cable are twisted around each other to eliminate crosstalk.

- It has a conductor made from copper in the center of the cable - It uses two concentric metallic conductors

A technician is configuring the static TCP/IP settings on a client computer. Which of the following configurations are needed for internet communications? (Select 3) 1) DNS server address 2)WINS address 3)IP address including a subnet mask (IPv4) or subnet prefix length (IPv6) 4)Default gateway address 5)APIPA address 6)Alternate IP address 7)DHCP server address

-DNS server address -IP address including a subnet mask (IPv4) or subnet prefix length (IPv6) -Default gateway address

(3.2.6) Which of the following voltages are provided by an ATX power supply.

5 12 3.3

Your system is running out of disk space. You need to extend the system volume to give it more space. Which of the following conditions MUST be met to extend the system volume? (Select TWO). 1.) The system volume must be on a dynamic disk 2.) The system volume 3.) The system volume must be formatted with NTFS 4.) The volume must be spanned to use disk space on a different disk 5.) The disk must have contiguous free space on the same disk

-The system volume must be formatted with NTFS -The disk must have contiguous free space on the same disk

On a Linux system, what is the name of the directory where you will find a text file called devices that contains information about the devices that are configured on the system?

/proc

1) Metropolitan Area Network (MAN) 2) Wireless Local Area Network (WLAN) 3) Wide Area Network (WAN) 4) Personal Area Network (PAN) 5) Local Area Network (LAN)

1) A network that is typically owned and managed by a city as a public utility 2) Similar to a standard LAN, but uses radio signals instead of wires to connect systems together 3) A group of networks that are geographically isolated, but are connected to form a large internetwork 4) A small network used for connecting devices, such as a notebook computer, a wireless headset, a wireless printer, and a smartphone 5) A network in a small geographic area that typically uses wires to connect systems together 1) A network that covers an area as small as a few city blocks to as large as an entire city 5) A set of subnets connected to each other, typically by wires, using at least one router.

Match the video card types on the left with the appropriate characteristics on the right. Each video card type is used more than once. 1. Installed in an expansion slot on the motherboard. 2. Has a GPU and a dedicated high-speed video memory bank . 3. Are more powerful and more expensive. 4. GPU is integrated with another hardware component, such as a motherboard or CPU. 5. Shares system memory for graphic processing 6. Are much cheaper and less powerful. A. Integrated Video cards B. Dedicated Video cards

1. Installed in an expansion slot on the motherboard. B. Dedicated Video card 2. Has a GPU and a dedicated high-speed video memory bank. B. Dedicated Video Card 3. Are more powerful and more expensive. B. Dedicated video card. 4. GPU is integrated with another hardware component, such as a motherboard or CPU. A. Integrated video card. 5. Shares system memory for graphic processing. A. Integrated video cards 6. Are much cheaper and less powerful. A. Integrated video cards.

You have just finished the upgrading the CPU in your desktop system. After running the system for about 15 minutes, the system spontaneously shuts down. What steps should you take to troubleshoot the problem? (select two) 1.) Check the CPU fan power 2.) Check the thermal shutdown threshold in the BIOS 3.)Replace the power supply 4.)Remove any unnecessary components and run the system. 5.) Check the power supply voltage switch

1.) Check the CPU fan power 2.) Check the thermal shutdown threshold in the BIOS

You work at a computer repair store. You just upgraded the processor in a customer's Windows-based computer. The customer purchased the latest AMD Phenom II processor, and you installed it in the computer. When you power the computer on, you only see a blank screen. What is most likely causing the computer displaying a blink screen? (Select two) 1.) The CPU is bad 2.) The heat sink and fan were not installed correctly. 3.) Someone unplugged the computer without preforming a proper shutdown first. 4.) The power connector for the fan was not connected to the motherboard. 5.) The CPU is not supported by the BIOS

1.) The CPU is bad. 5.) The CPU is not supported by BIOS

You are installing an updated driver for a hardware device on your system. A dialog box displays indicating that Microsoft has digitally signed the driver you are installing. What benefits does driver signing provide? (select two) 1.) The driver has been tested by Microsoft 2.)The driver being installed is the most recent driver available 3.) The driver will not interfere with other devices on the system 4.) The driver being installed is compatible with 32- and 64- bit versions of windows 5.) The driver file has not been altered

1.) The driver has been tested by Microsoft 5.) The driver file has not been altered

Which of the following IP address ranges is reserved for Automatic Private IP Addressing? A- 169.254.0.1-169.254.255.254 B- 192.168.0.1-192.168.254.255 C- 169.192.0.0-169.168.255.255 D-169.168.0.1-169.168.255.255

169.254.0.1 - 169.254.255.254

Given that your Windows workstation has Automatic Private IP Addressing (APIPA) implemented using default settings, which of the following TCP/IP addresses could be automatically assigned to the system should your DHCP server go down or become inaccessible? 1)169.198.1.23 2)192.168.1.2 3)169.254.1.26 4)168.254.10.25 5)10.0.0.65

169.254.1.26

Which of the following are valid IP addresses? (Select TWO.)

172.16.1.26 2.2.2.2

List the steps you need to follow to add more disk space to a Storage Space in Windows 10. Drag the correct steps from the left to the correct step number on the right.

1st step - Install a new storage device to the system 2nd step - Add free space on a new storage device to a storage pool 3rd step - Allocate space from a storage pool to an existing storage space When you need more disk space for your storage spaces, follow these steps: -Install a new storage device to the system -Add the free space on that device to a storage pool -Allocate space to an existing storage space

You have just upgraded the CPU on your computer. You consulted the motherboard documentation to make sure the CPU is compatible with the motherboard. However, when you turned the system on, it locks up shortly after startup. While troubleshooting this issue, which of the following are the best steps to try first? (Choose two) 1.) Replace the CMOS battery 2.) Look for something that could be causing the new CPU to overheat 3.) Make sure the power cord is plugged in and the power supply switch is in the On position 4.) Make sure the CPU is seated properly, oriented properly, and locked into the socket. 5.) Test the power supply using a multimeter.

2.) Look for something that could be causing the new CPU to overheat 4.) Make sure the CPU is seated properly, oriented properly, and locked into the socket.

Lately your computer is spontaneously shutting down after only a few minutes of use. What is the most likely cause? (Choose two) 1.) The CPU is not supported by the BIOS 2.) The power connector for the fan was not connected to the motherboard 3.) The heat sink and fan were not installed correctly 4.) Someone unplugged the computer without preforming a proper shutdown first. 5.) The CPU is bad.

2.) The power connector for the fan was not connected to the motherboard 3.) The heat sink and fan were not installed correctly

An administrator configures a server to run the TCP/IP suite protocol that allows users to download files contained in specific directories on the server and also protects access to those files by requiring user authentication. Which of the following TCP/IP port numbers allow this protocol to work properly? (Select TWO).

20 21

A tech is replacing a cable modem. The cable from the cable company has an inner solid wire conductor and an outer mesh conductor separated by PVC plastic insulation. Which of the following network cable types is being used? 1)Twisted pair cable 2)Fiber optic cable 3)Coaxial cable 4)Straight- through cable.

3)Coaxial cable

To assist a user, a help desk technician is able to take advantage of a Windows proprietary network protocol that allows the technician to open a graphical interface to connect with the user's Windows computer. Which of the following TCP/IP port numbers is the default port used by this protocol?

3389

While working on a Windows workstation, you've enabled Remote Desktop. Which of the following ports MUST be opened in the server's firewall to allow remote clients to access the desktop?

3389

One of the video editors in your company is worried that he may lose a lot of data if his heart this fails. He has asked you to come up with a solution. To do this, you have decided to implement a raid 10 solution on his desk tops workstation. Which of the following is the minimum number of hard disks that can be used?

4

You are building a new computer and have purchased a motherboard that includes four built-in SATA connectors. Which of the following MOST accurately lists the maximum number of SATA devices you can connect to the motherboard using the integrated ports?

4 Explanation: You can connect on SATA device per port.

(3.3.6) Which of the following motherboard power connectors typically connect directly to the motherboard? (Select two.)

4-pin CPU power24-pin motherboard power.

While making an online bank transaction, a customer checks to see that the web browser is displaying a lock icon that indicates that an encrypted TCP/IP suite protocol is being used. Which of the following TCP/IP port numbers does this protocol typically use when the browser encrypts its communications with the bank's web server?

443

You have a CDR W Dr. that advertises speeds of 32×12×48x. What is the read speed of this drive?

48x

You've just installed the DNS service on a Windows server. Which port must be opened in the server's firewall to allow clients to access the service?

53

OLED

A company is purchasing new laptops for their graphic artist division. Which of the following display technologies provide better contrast and deeper blacks, resulting in better picture quality?

A dual-rail power supply provides separate rails (PCB Traces) used to balance the power load between multiple circuits, which prevents any one circuit from being overloaded.

A computers power supply converts mains AC to low-voltage regulated DC power for the internal components of a computer. You are building a new computer. You are deciding which type of power supply to install. Which of the following definitions BEST describe a valid type of PSU?

Check the monitor's brightness and contrast settings using the controls on the monitor

A customer complains that a recently purchased monitor no longer displays a picture. You verify that the monitor is powered on and that the video cable is securely fastened to the video port. Which of the following actions is the best to take next?

(3.2.6) A computers power supply converts mains AC to low-voltage regulated DC power for the internal components of a computer. You are building a new computer. You are deciding which type of power supply to install. Which of the following definitions BEST describes a valid type of power supply?

A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded.

Multimode fiber optic

A medical center wants to upgrade their network database backbone to 1-Gigabit Ethernet (10 Gbps) so the y can perform daily backups of large amounts of data to the secure on site storage area network (SAN) without bogging down the network. Some of the backbone segments will have to reach between buildings that are close to 300 meters apart. Which of the following cable types best supports the 1--Gigabit Ethernet at the necessary segments lengths while keeping costs as low as possible?

Which of the following is the best definition for a LAN? 1)An extension of a private network over shared or public network, such as the internet 2)A network in a small geographic area, like in an office 3)A network whose computers and servers are separated geographically but still connected 4)the interconnection of computers, such as laptops, printers, keyboards, and other wireless devices w/in a personal range.

A network in a small geographic area, like in an office

Buffered memory is more expensive and slower than unbuffered memory

A new computer is being purchased for Peter, the new administrative assistant. Peter uses word processing, spreadsheets, presentation software, and a web browser to complete his job assignments. Which of the following best describes the reason to choose unbuffered instead of buffered memory for this new computer?

During the POST, you receive the following message: Keyboard not present. Press F1 to continue. What are the most likely causes of this error message? (Select TWO.) Incorrect keyboard data in the CMOS A broken F1 key A poor keyboard connection An outdated BIOS A stuck key on the keyboard

A poor keyboard connection stuck key on the keyboard

(3.2.6) You have a motherboard that uses a 24-pin ATX connector.Which types of power supply could you use with this motherboard?

A power supply with a 20-pin ATX and a +4-pin connector. A power supply with a 24-pin ATX connector only.

Micro SD Card

A sales person requires that a large number of document, data, presentation, image, and video files be accessible on their personal mobile device when making sales pitches to new customer. A cloud solution is not feasible, since cellular and internet connections are not always guaranteed at a customer site. Which of the following accessories would a technician suggest to best meet the sales persons requirements? - Micro SD Card - Credit card reader - Docking station - Wireless hotspot

Verify that no keys are being pressed down during POST

A user called to complain that her computer won't boot. It stops on the system startup screen right after the memory has been tested and displays a 301 keyboard error. Which of the following troubleshooting steps is the best to try first?

Which of the following statements about the Dynamic Host Configuration Protocol (DHCP) are true? (Select Two) A) A workstation must request addressing information from a DHCP server. B) It cannot be configured to assign the same IP address to the same host each time it boots C)It can deliver a DNS server address in addition to the host IP address. D) It can only deliver IP address to hosts. E)The DHCP server detects workstations when they attach to the network and automatically delivers IP addressing information to them.

A)A workstation must request addressing information from a DHCP server. C)It can deliver a DNS server address in addition to the host IP address.

Which of the following video card connectors provides digital video output? (Select TWO) A. HDMI B. Composite C. S-video D. DVI-A E. DVI-D

A. HDMI E. DVI-D

A technician wants to connect a computer to a high-definition television (HDTV). The technician has attached an HDMI cable from the video card to the television, however, the video card is only sending a video signal over the cable. The technician decides to use the audio pass-through technique to deliver audio to the television. An audio output cable is connected to the video card and television. Which of the following options was used for the audio pass-through? A. HDMI out B. DirectX/OpenGL C. Multi-GPU D. HDCP

A. HDMI out

You are in the process of building a new computer. You would like to configure your computer to use CrossFire to improve performance when playing your favorite game. Which of the following will be part of the configuration process? A. Purchase two identical video cards. B. Purchase a video card that supports HDCP C. Purchase a video card that supports the DVI standards D. Purchase a video card that supports the HDMI standards

A. Purchase two identical video cards.

(3.1.3) A= B= C= D= E =

A= Mini-ITX Tower B=Micro-ATX Slim Tower C= Micro-ATX Tower D= ATX Mid-Tower E= ATX Full-Tower

(3.1.3) You need to purchase a case that meets the following criteria: Compatible with most form factors At least two external and internal bays Good balance of size and space

ATX mid-tower

Play a video designed to fix dead pixels

After using your LCD monitor for about three months, you notice a small black dot in one area of the screen. Regardless of what is shown on the monitor, the dot remains the same color and in the same location Which of the following is the best method for removing the black dot from the monitor?

(3.2.6) Which of the following functions does an ATX power supply perform?

Aids in thermal management.Converts AC to DC.

You have a user who takes his laptop home everyday after work. When hes working in the office, the laptop must get an IP address from the DHCP server so you configure it to obtain IP and DNS information automatically. When hes working from home, the laptop must IP and DNS information that connects with his home network. 1)APIPA IP addressing 2)Dynamic IP addressing 3)Static IP addressing 4)Alternate IP configuration

Alternate IP Configuration

After working without problems for a couple years, your computer has begun to lock up. You suspect that it is a thermal issue but you can't find any component that is not functioning correctly. You have not replaced the CPU or installed any new devices. The CPU cooling fan and the power supply fan are working properly. The lock-ups are happening with increasing frequency. What is a common condition that might explain these symptoms?

An accumulation of dust has gradually built up.

The CMOS Battery has failed

An employee complains that every time they turn their computer off, the computer's time is set to 12:00 p.m., and the date is set back to January 1, 1990. Which of the following is the MOST likely cause of the anomaly?

1.) Make sure the surge protector is turned on 2.) Make sure the power cord is plugged into the wall

An employee submitted a support ticket stating that her computer will not turn on. Which of the following troubleshooting steps should you take first?

32 nm

Assuming all other processor specifications are the same, which of the following processor sizes will consume the least amount of power?

A windows Workstation is configured to receive its IP configuration information from a DHCP server on the company network. The user at the workstation reports that she cannot use email and is unable to reach the Internet. Using the ipconfig command you see that the workstation has been assigned the following special IP configuration: IP Address: 169.254.0.1 Subnet mask: 255.255.0.0 What is this special IP configuration called? Why did the workstation receive this type of configuration?

Automatic Private IP Addressing (APIPA) The workstation was unable to contact the DHCP server

Advantages of using fiber optic cabling for a network(pick two). A- Increase flexibility B- Immunity to electromagnetic interference C- Faster installation D- Lower installation cost E- Greater cable distances w/out a repeater

B- Immunity to electromagnetic interference E- Greater cable distances without a repeater

You have a friend who is offering to sell the monitor and video card from his gaming system along with several PC games. The games have fast-moving graphics, and you want to be able to play them on your own home system. The monitor he is selling is an LCD TN with a 144-Hz refresh rate. The video card he is selling supports a max refresh rate of 144 Hz. You're sure you want to buy the games, but you have a couple of other choices when it comes to the monitor and the video card. The monitor in your current system has a 60 Hz refresh rate. The video card has a max refresh rate of 75 Hz. This configuration has always worked fine for watching videos. You're also looking at new 60-Hz LCD IPS monitors and several high-end video cards with max refresh rates of up to 240 Hz. Which of the following will MOST likely allow you to play the games on your home system with the best gaming experience possible? A. Buy the games from your friend and spend some extra money on the newer 60-Hz LCD IPS monitor and one of the newer 240 fps video cards. Swap out both your video card and monitor. B. Buy your friend's games, monitor, and video card. Swap out both your video card and monitor. C. Buy the games and use your existing card and monitor. D. Buy the games and the monitor from your friend. Swap out just your current monitor and use your existing video card.

B. Buy your friend's games, monitor, and video card. Swap out both your video card and monitor.

You work for a company that provides technical support for customers. One customer calls wanting to know how to adjust their monitor so they can have the sharpest and most detailed images, words, and icons. Which Control Panel setting should you adjust to BEST meet the customer's needs? A. Ease of access B. Resolution C. Refresh rate D. Color depth

B. Resolution

A customer wants to add an additional video card to her computer so she can play the latest computer games. As a result, this system will now have a multi-GPU configuration. Which of the following statements are true? (Select TWO) A. Linking only shares memory resources, not GPU resources. B. The motherboard should support either SLI or CrossFire C. Linking video cards also provides additional video output ports. D. An SLI video card can be linked with a CrossFire video card. E. For the best performance, both video cards should be identical.

B. The motherboard should support either SLI or CrossFire E. For the best performance, both video cards should be identical.

HDMI cables are able to carry both video and audio signals; however, most video cards send only a video signal. Which of the following techniques can be used to send an audio signal through the video card? (Select TWO). A. DirectX/OpenGL B. Using a graphics card with an onboard audio processor C. Multi-GPU D. Using a DVI cable in addition to the HDMI cable E. Audio pass-through

B. Using a graphics card with an onboard audio processor E. Audio pass-through

Which Blu-ray standard defines rewritable disks?

BD-RE

To improve system performance, you have configured a motherboard to run with a higher multiplier than what the CPU is specified to use. Since doing this, the system has become unstable and crashes frequently. To restore system stability, what should you do?

Back off the overclocking settings until the system runs in a stable manner.

You have decided to install a new Ethernet network adapter in your Windows 10 desktop computer. After installing the card and booting to Windows, you notice that you have no network connection. After looking in Device Manager, you see that the new network card was detected, but Windows doesn't know what it is. After doing a quick search on the internet, you find what looks like the correct driver and install it. A reboot of Windows is performed, but almost immediately after logging on, your computer crashes. Thinking this must be a fluke, you reboot again with the same result. Which of the following is the BEST tool to get Windows to load properly? Boot from the Windows installation DVD and run Start-up Repair. Boot to Safe Mode and uninstall the network driver. Boot to the computers BIOS/UEFI settings and uninstall the network driver. Boot from the Windows installation DVD and restore your computer back to a previous restore point.

Boot to Safe Mode and uninstall the network driver

The computer has a single-core CPU configured to use hyper-threading

Brian is a new employee on the development team. As part of his job, he runs three virtual machines on his computer. Each VM runs a different windows license. After a while, Brian notices that his VM's are not running as fast as he thought. He asked you to explore the issue. Which of the following BEST describes why Brian's VM's are running slowly?

You have just installed a new video card in Mark's computer. When you power on the computer, Windows automatically detects the new device and tries to locate an applicable device driver. Unfortunately, Windows cannot locate the required driver. Which of the following would be the BEST administrative tool to fix Mark's computer? A. System configuration B. Resource Monitor C. Computer Management D. Component Services

C. Computer Management

You are installing a high-end PCIe x16 video card in a new computer. The video card has connectors for two displays. The card also has dual fans to cool the unit. Which of the following will MOST likely be part of the installation? A. Enables the motherboard's integrated graphics in the BIOS B. Connect a CrossFire bridge cable to the video card. C. Connect a 6- or 8-pin power connector to the video card D. Enable the video card's second monitor connector in the BIOS

C. Connect a 6- or 8-pin power connector to the video card.

A customer would like you to install a high-end video card suitable for gaming. Your installation and configuration SHOULD include which of the following? (Select THREE). A. Disable the integrated graphics in all cases so they do not interfere with the new video card. B. Disable power to the integrated graphics C. Ensure that the video card is compatible with the expansion slot. D. Configure the PC to use the integrated graphics if available and needed. E. Install new the video drivers from CD and then install updated drivers from the internet. F. Link the integrated graphics to the new high-end video card using the bridge clip. G. Add additional RAM to your computer to accommodate the new card's demands.

C. Ensure that the video card is compatible with the expansion slot. D. Configure the PC to use the integrated graphics if available and needed. E. Install new the video drivers from CD and then install updated drivers from the internet.

The CEO of your small company has asked you to connect his laptop computer to the small conference room LED TV. The CEO will be showing a new promotional video that demonstrates the new company strategy through images and sound. Which of the following cable types would work BEST for connecting his laptop to the display? A. Composite B. VGA C. HDMI D. DVI

C. HDMI

You are in the process of building a new computer. You would like to configure your computer to use SLI to improve performance while playing your favorite game. Which of the following will MOST likely be part of the configuration process? (Select THREE) A. Purchase a 1200-watt power supply B. Purchase a motherboard with integrated video and an add-on card that supports the VGA standards. C. Purchase a motherboard with two (or more) PCIe x16 slots D. Purchase two graphics cards with SLI and similar specifications E. Purchase a motherboard with integrated video and an AGP 8x slot F. Purchase a 7200 rpm or better hard drive G. Connect at least one monitor to the graphics card.

C. Purchase a motherboard with two (or more) PCIe x16 slots D. Purchase two graphics cards with SLI and similar specifications G. Connect at least one monitor to the graphics card.

Your company has decided to hire a full-time video editor. You have been asked to find a system with the level of display quality needed by someone who will be working with video all day. Which of the following video related specifications will have the greatest impact on display quality? (Select TWO) A. Display Connector type B. GPU configuration C. Resolution D. Memory E. Refresh rate

C. Resolution E. Refresh rate

Which of the following is a valid MAC address

C0-34-FF-15-01-8E

(3.3.6) Maintains an accurate system time and date, even when the power is off.

CMOS battery

(3.2.6) Which of the following devices use the 4-pin peripheral (Molex) connector?

Case fan PATA CD-ROM

1) Lost clusters 2) Cross-linked file 3) Orphaned files 4) Bad sector

Check Disk detects disk integrity errors and fixes them. Match the types of errors Check Disk detects and fixes with the error descriptions. 1) A series of used clusters on the hard disk drive that are not associated with a specific file. 2) Occurs when two files claim the same cluster. 3) Files that exist on the hard drive but which are not associated with a directory in the index. 4) A portion of the hard disk that cannot be used.

Nate, an employee in your organization, has started to work from home two days a week. Nate uses the same company laptop while working in the office and working at home. Nate's laptop automatically connects to the wireless network in the office, but does not automatically connect to his home wireless network. Nate would like the laptop to connect automatically at home and at work. Which of the following would best allows this to happen? 1) Configure automatic private IPv4 addressing. 2)Configure an alternate TCP/IP configuration on the laptop's wireless adapter to use a static IP address that is compatible with the home network. 3)Configure a static IP address that works for both the office and the home wireless networks

Configure an alternate TCP/IP configuration on the laptop's wireless adapter to use a static IP address that is compatible with the home network.

You are running windows 10 on your computer. Do you want to decrease the time it takes to write data on your drives. To do this, you have decided to create windows 10 software raid system using a striped volume. Before you can create the striped volume, what action must you take?

Convert basic desk to dynamic disks

Your computer has a single hard disk with a single volume used by C:\ drive. You have previously upgraded the disk to a dynamic disk. The disk has run out of disk space. You need to add more space to the C:\ volume. You add a new hard disk to the computer. What would be the best step to complete while adding space to the C:\?

Create a mount point using space on the second disk.

Which of the following BEST describes the type of cable configuration and the purpose for which it should be used? Look up the image**

Crossover cable configuration used to connect computers directly to one another for networking

You need to connect a monitor that provides an HDMI port and a VGA port to a video adapter in a PC system that uses a DVI-D connector. Which of the following options should provide the BEST display quality at the lowest cost? A. Purchase a new monitor with a DVI-D port. B. It's not possible to connect this monitor to this PC C. Use an adapter to connect the monitor VGA port to the DVI-D D. Use an adapter to connect the monitor HDMI port to the DVI-D connector on the PC

D. Use an adapter to connect the monitor HDMI port to the DVI-D connector on the PC

As the IT technician for your company, you need to ensure that the IP address are automatically assigned to hosts while at the same time preventing the same address from being assigned twice. Which of the following services would be BEST to use? 1)ICMP 2)TCP 3)DHCP 4)IGMP

DHCP

Whats a conduit used by high-speed devices to bypass the CPU and communicate directly with RAM?

DMA (Direct Memory Access)

Currently, the users in your company are required to use their IP addresses when connecting to the other hosts. Since IP addresses are difficult to remember, you want to implement a protocol on your network that allows computers to automatically find another host's IP address using a logical name.

DNS

You want to implement name resolution on the Linux workstations in your company. Which protocol will you use to do this?

DNS

You are the IT technician for your company. Which of the following mechanisms would be BEST allow you to resolve a hostname into its associated IP address?(Select TWO) 1)DHCP 2)BOOTP 3)host file 4)FTP 5)DNS

DNS Host files

Which of the following are optical storage devices?

DVD, CD, BD

You have a computer with three hard disks. A raid0 volume uses space on disks 1 and disks 2. A raid 1 volume usage space on disk two and three. Disk 2 to fails. Which of the following is true?

Data on RAID 1 volume is accessible; data on the RAID 0 volume is not

Windows 10 features a storage solution call Storage Spaces. What is the name of the Storage Spaces feature that allows to allocate space for redundant information using options that include two-way mirroring, three-way mirroring, and parity?

Data resiliency Storage spaces can include data resiliency. Choosing an option that provides resiliency requires you to allocate space for redundant information. The options for storage spaces data resiliency include: -Simple, which does not provide redundancy. This option simply adds space from the storage pool to the storage space. When you select the Simple option, all of the data in the storage space is lost if one of the drives fails. -Two-way mirror requires at least two storage devices. The data is written to two devices. Two-way mirror requires twice as much device space as the amount of storage allocated to the storage space. This option protects you from a single storage device failure. -Three-way mirror requires at least five storage devices. The data is written to the three storage devices. This option provides redundancy for the data if two storage devices fail at one time. -Parity requires that you have at least three storage devices. This option uses parity information to reconstruct data if one of the storage devices fails. Parity uses less space for redundancy than the mirror options, but performance is not as good as the mirror options if a device failure occurs. Parity requires only 50 percent more redundancy space than storage space.

Which TCP/IP configuration parameter identifies the router that is used to reach hosts on remote networks? 1)Alternate IP address 2)Subnet mask 3)Hostname 4)DNS server address 5)WINS server address 6)Default Gateway

Default Gateway

Alice recently purchased a new cell phone. After her vacation, Alice wanted to transfer her holiday photos to her computer, where she could do some touchup work before sending the pictures to her children. When Alice attached her phone to her computer, she saw that Windows detected her phone and tried to load the applicable software to give her access to her phone. Unfortunately, after trying for several minutes, Windows displayed a message indicating that it was unsuccessful. When Alice explored her available drives, her phone was not listed. Which of the following would be the BEST administrative tool to help Alice gain access to her phone? System Configuration Device Manager Services Component Services Event Viewer

Device Manager

As a member of the help desk administration team, you've been assigned to update the driver for the network adapter that is installed on most of the machines in your department. You have a copy of the latest driver on a USB flash drive. Which windows utility will allow you to manually update this new driver?

Device Manager

Which system utility would you use to troubleshoot hardware devices, examine and control the resources used by specific devices, and install updated device drivers?

Device Manager

Which system utility would you use to troubleshoot hardware devices, examine and control the resources used by specific devices, and install updated device drivers? Device Manager Network Notification Area System Restore Control Panel

Device Manager

What tool would you use to delete partitions on hard drives?

Disk Management

You have just connected a new USB device to your Windows system. You used the installation disc that came with the device to install the drivers needed to support the device. Since the installation, the system frequently crashes when you try to access the new device. Which of the following steps would MOST likely resolve this issue? Run the Add Legacy Hardware wizard and manually configure the device. Remove and then reinstall the device. Download and install the latest driver from the manufacturer's website. Replace the device itself.

Download and install the latest driver from the manufacturer's website.

You have just installed a new device in your Windows system. After installation, you can't use the device. You check Device Manager and find an icon for the device with a yellow exclamation mark over it. What should you do? Download the latest driver from the manufacturer's website. Enable the device. Reinstall the device. Run the Add Legacy Hardware wizard and manually configure the device. Replace the device.

Download the latest driver from the manufacturer's website.

(3.2.6) Which power supply feature helps prevent circuit overloads by balancing the current flow?

Dual rail

Since it has no moving parts, a CPU will usually work properly for several years. Which is a common factor that might cause a CPU to fail prematurely?

Electrostatic discharge

(3.3.6) Allows additional features and capabilities to be added to the motherboard.

Expansion slots

(3.3.6) Which of the following objects is installed between the system case and the motherboard's back I/O ports?

Faceplate

You want to allow your users to download files from a server running the IP protocol. You want to protect access to the files by requiring user authentication to access specific directories on the server. Which IP protocol should you implement to provide this capability?

FTP

A customer is upgrading the routers and switches in their network. The signal source in these network devices is a light-pulse.

Fiber Optic

(3.3.6) Contains firmware that is used to configure motherboard settings and initialize devices

Flash memory

Riser

For a special project, you have been asked to recommend the lowest profile desktop computers available. You are attempting to put together the specifications for these machines. Which of the following types of cards are attached to the motherboard to allow expansion cards to plug into them instead of the motherboard? • Communications and Networking Riser • Riser • PCMCIA • VESA Local Bus

1.) The monitor's inverter has gone bad 2.) The power adapter was accidentally unplugged

For several years, the monitor on your laptop has worked perfectly. However, shortly after turning on your laptop today, you noticed a definite dimness. Which of the following is the most likely cause?

(3.2.6) You need to replace the power supply in your home desktop computer.Which of the following specifications are the most likely to affect your power supply choice?

Form factor Type and number of connectors Output wattage

What is a major benefit STP provides that UTP does not? 1)Greater resistance to interference 2)Ability to install longer cable lengths 3)lower cost 4)safer for installations in overhead ceiling spaces.

Greater resistance to interference

You are using a crimper to attach an RJ-45 connector to a Cat 6 UTP cable. You need to use the T568A standard to connect the individual wires to the connector. Which wire should be connected to pin 1? 1)Green 2)green w/ white 3)orange w/ white 4)blue

Green with white

What term describes a PC card that you can insert and remove without rebooting the computer?

Hot swappable

What allows two devices in a computer to send information to each other?

I/O address

What is something each device in computer must have of its own?

I/O address

Most devices that you install in a system require little to no configuration; they simply work after you plug them in. This is because devices are automatically assigned the system resources needed for the device to begin functioning. What are the three types of system resources that are usually automatically assigned?

I/O adress, IRQ, DMA channel

Which of the following protocols is used by an email client to retrieve messages from an email server and gives users the option to keep mail messages on the server?

IMAP

You want to use your Windows workstation to browse the websites on the internet. You use a broadband DSL connection to access the internet. Which network protocol must be installed on your workstation to do this?

IP

A large screen and a projector

Ida, one of the employees in the sales department, needs a way to display her power point sales presentation to a large group of potential customers. She has asked you to set up the conference room in preparation for her presentation. You will need to purchase a display system for the conference room. Which of the following display systems would be the best to purchase?

active partition

If you want to boot from a hard drive, what must it have?

While troubleshooting a computer, you need to view a list of all IRQs and the device using each IRQ. What option would BEST allow you to accomplish this task?

In device manager, click View > Resources by type

You are setting up a small network in your office with one Windows server and 50 Windows workstations. You want to spend as little time as possible configuring the workstations with IP addressing information. What should you do? A- Install the DHCP service on each workstation. B-Install the WINS service on your server C-Assign each user an IP address ad instruct the user to enter the IP address in his or her computer D-Install and configure the DHCP service on your server.

Install and configure the DHCP service on your server.

You have an existing Computer running windows 10. you want to configure a raid 1 array in the computer. You installed two new Sata drives, then use the raid controller integrated in the motherboard to define a raid one array Using them. When you boot the computer windows does does not show the logical raid drive. What should you do?

Install the drivers for the raid controller

Which of the following statements accurately describes how a modem works?

It demodulates analog data from a telephone network into digital PC data It modulates digital data from the PC into analog data and transmits it on telephone network

A technician must press a cable connector's retaining tab to remove a faulty fiber optic network cable Which of the following connectors does the cable use? 1)RJ45 2)RJ11 3)LC 4)ST

LC

OLED

Lloyd works for a graphic design company. He needs a monitor that accurately represents colors. Lloyd's monitor recently failed, and you have been asked to purchase a new one. You have been asked to find a monitor with a fast pixel refresh rate, low energy consumption, and very accurate colors representation. Which of the following types of display devices will best meet the requirements requested?

You are configuring a new system and you want to use raid zero array for the operating system using sata disks and the raid functionality built into the motherboard. Which of the following best describes the action you will take as part of the configuration?

Load the raid drivers during operating system installation

You are trying to connect a new USB device to your computer. You install the driver and then connect the device to an open USB port. The device does not work. Which of the following troubleshooting steps is the BEST to try first? Replace the USB device. Install a new USB controller card. Try a different USB cable. Make sure the USB device is plugged in properly.

Make sure the USB device is plugged in properly.

(3.2.6) An employee submitted a support ticket stating that her computer will not turn on.Which of the following troubleshooting steps should you take first

Make sure the power cord is plugged into the wall.Make sure the surge protector is turned on.

Full Array WLED

Match the LCD type with the feature/benefit/characteristic. Able to dim specific regions of the screen.

CCFL

Match the LCD type with the feature/benefit/characteristic. Produces better colors than WLED, but consumes more energy.

RGB-LED

Match the LCD type with the feature/benefit/characteristic. Superior Accuracy -- Most expensive type of backlighting technology.

WLED -White LED

Match the LCD type with the feature/benefit/characteristic. The least expensive, thinnest, most widely used type of LCD

You have been asked to implement a network infrastructure that will accommodate failed connections. Which of the following network topologies provides redundancy for a failed link? 1)Bus 2)Tree 3)Ring 4)Mesh 5)Star

Mesh

You have implemented an ad hoc wireless network that doesn't employ a wireless access point. Every wireless network card can communicate directly with any other wireless network card on the network. What type of physical network topology has been implemented in this type of network? 1)Bus 2)Tree 3)Ring 4)Mesh 5)Star

Mesh

You have a network that uses a logical bus topology. How do messages travel through the network? 1)Messages travel from one device to the next until they reach the destination device 2)Messages are sent directly to the correct destination device 3)Messages are sent to the central device, which the forwards the message to the destination device. 4)Messages are broadcast to all devices connected to the network.

Messages are broadcast to all devices connected to the network

You have a network that uses a logical ring topology. How do messages travel through the network? 1)Messages travel from one device to the next until they reach the destination device 2)Messages are sent to a central device, which then forwards the messages to the destination device

Messages travel from one device to the next until they reach the destination device

(3.1.3) You want to build a computer that can stand upright on a desk and takes up the least amount of space possible.

Micro-ATX slim tower

(3.1.3) Which of the following motherboard form factors BEST allows for low-consumption power supply?

Mini-ITX

(3.2.6) Which of the following components converts AC to DC?

Power supply

(3.1.3) Which of the following form factors does not have expansion slots on the motherboard, but instead uses a riser card for expansion cards?

NLX

Which network component connects a device to the transmission media and allows it to send and receive messages?

Network interface card

(3.3.6) Stores custom configuration settings made by the user.

Non-volatile BIOS memory

(3.3.6) Controllers communication between the CPU, memory and high-speed graphics bus.

Northbridge

(3.2.6) You are testing the power in a PC system by measuring the voltage available on the 4-pin Molex connector. The voltage on the red wire in +5.1 volts. What should you do?

Nothing, the power supply is working normally.

Device manufacturers are constantly finding bugs, vulnerabilities, or better ways for their devices to communicate with the operating system. Because of this, what is the BEST practice to do before installing a new device?

Obtain the latest driver from the manufacturer's website.

You have a computer with a single hard disk configured as a basic disk with a single partition formatted with NTFS. The computer runs Windows 10. The disk has run out of space. You need to add space to the disk. You install a new hard drive and start disk management. What is a required task to add space to the existing volume?

On the new hard disk, create a new partition without a drive letter.

A technician connects two network switches using a twisted pair cable. Neither switch support auto-up-linking. Which of the following identifies the TIA wiring standard required on each end of the cable? 1)both ends must only be T568B 2)one end must be T568A and the other must be T568B 3)both ends must only be T568A

One end must be T568A, and the other must be T568B

Connect the computer to a UPS

One of the users in your company notices some strange behavior on his computer. After describing what is being seen, you do a little research and determine that the best course of action is to update the UEFI firmware. Before performing the upgrade, if possible, which of the following is the best action to take?

(3.2.6) You need to replace the power supply in your home desktop computer. As you choose the replacement power supply, which of the following specifications are the most likely to affect your choice?

Output wattage Form factor Processor connector

Zoey has brought her computer in for servicing. When she dropped off her computer, she mentioned that her computer will sometimes spontaneously reboot and freeze occasionally. What would most likely be the cause of this problem?

Overheated CPU

(3.3.6) Which expansion slop is best for high-end dedicated video cards?

PCIe x16

Steve, a computer technician, received a help desk ticket for a computer that will not start. When Steve powered the computer on, there was one long and two short beeps. Which of the programs is reporting this error condition?

POST

Non-ECC memory, as it is less expensive, and parity is not required

Paul has just joined your company, and you are in the process of purchasing a laptop computer for his use. Paul will work as a sales rep in the sales department. You have heard that some types of RAM are better than others. Which of the following types of RAM would best meet the needs of Paul's new computer?

Which of the following terms refers to a network resource sharing model that uses access control lists saved on each computer? A) Intranet B) Extranet C) Client/server C) Peer-to-peer

Peer-to-peer, aka, Workgroup

A group of workers in an office space communicate with each other on their smartphones and tablet devices through an ad hoc network linked using Bluetooth technology protocols Which of the following network types is in use? *PAN *WAN *LAN *MAN

Personal Area Network (PAN)

You are installing networking cable in the air space between the ceiling and the roof of a building. Which type of should you use? 1)Plenum 2)PVC 3)Multi-mode fiber 4)STP

Plenum

A technician is running a network above a dropped ceiling that is also used for ventilation. The cable must be twisted pair and must be capable of Gigabit Ethernet speeds.Which of the following cables should be used? 1)Riser-Rated RG-58 2)Plenum-rated CAT-6a 3)Plenum-rated multi-mode fiber 4)Riser-rated CAT-5e

Plenum-rated CAT-6a

Which of the following tasks would you complete as part of a SATA installation?

Plug the 15-pin power connector into the SATA drive.

A user is configuring an email client application and plans to use a standard TCP/IP suite protocol to retrieve email messages from an email server. Which of the following TCP/IP suite protocols can be used to retrieve email messages? (Select TWO).

Post Office Protocol (POP3) Internet Message Access Protocol (IMAP)

Due to a black out, power is no longer coming from the wall outlet, and your computer is now off. You do not have a UPS, and you need to remove a disc out of the CD drive. What is the easiest method for retrieving the disk ?

Push and unbend paperclip into the hole on the front of the drive

What is the advantage of RAID 5 over RAID 1?

RAID 5 improves performance over RAID 1

You are building a new computer that will contain to hard disks. To provide increased performance, you have decided to configure the devices using RAID technology. Which of the following would best meet your needs?

RAID 0

You have been asked to configure the Drives in a computer. The end-user wants to use striping without incorporating any fault tolerance. Which of the following would best meet these requirements?

RAID 0

A computer being used by the HR department needs to ensure that all the data on the computer is protected from a single disk hard drive failure. The data needs to be read as quickly as possible and HR department would like to maximize drive as much as possible. This computer can be used up to three drives. Which of the following raid types would meet these requirements and provide the best data protection?

RAID 5

Which of the following drive configuration uses striping with parity for fault tolerance?

RAID 5 Explanation RAID 5 also uses disk striping, but provides fault tolerance for a single disk failure. Disk striping breaks data into units and stores the units across a series of disks by reading and writing to all disks simultaneously. RAID 0 uses disk striping and offers no fault tolerance. A failure of one disk in the set means all data is lost. RAID 1 provides fault tolerance but does not use striping. A RAID 10 array nests a mirrored array within a striped array.

A tech is installing a cable modem that supplies internet for a home office. Which of the following cabling types would be used to connect the cable modem to the cable wall outlet? 1)RG6 2)Multi-mode fiber 3)CAT 5e 4)CAT 6a

RG6

Which kind of connector do you use to connect a modem to a standard telephone line? 1)RJ11 2)RG58 3)F-type 4)RJ45

RJ11

Which connector is used with unshielded twisted pair (UTP) cable? 1)BNC 2)DIX 3)AUI 4)RJ45

RJ45

Ben is concerned about losing data due to a hard disk failure. His computer will only support a maximum of three disks. To protect his data, you have decided to use raid (redundant array of independent disks) Which of the following raid types would give Ben the best mirrored data protection?

Raid 1

One of your customers wants to build a personal server that he can use in his home. One of his concerns is making sure he has at least one back up of their data stored on the server in the event of the disk failure. You have decided to back up his data using raid. Since the server is for personal use only, the customer wants to keep cost down. Therefore, he would like to keep the number of drives to a minimum. Which of the following grade systems would best meet the customer specifications?

Raid 1

(3.3.6) You have computer system with a dual-core processor. You would like to upgrade to a quad-core processor, but you don't want to replace the motherboard. Which of the following should you do first?

Read the motherboard documentation to identify which processors are supported

You have just installed several devices to a computer at once, but now the computer fails to boot properly. Which of the following troubleshooting steps is the BEST to try first? Remove all of the newly added devices and install them one at a time. Change the configuration of a single device. Swap a single device with one that you know to be good. Swap all of the devices with those you know to be good.

Remove all of the newly added devices and install them one at a time.

Anna has been backing up her data on a hot swappable drive mounted in an external hard drive docking station. This docking station holds two drives. Anna would like to exchange one of the drives with a drive of higher storage capacity. What is the BEST method for replacing the drive?

Remove and replace the drive after using the Safely Remove Hardware feature to shut down the device.

Your system crashes at various times, sometimes on startup, sometimes when running a software application, sometime when a certain group of applications is running. You suspect a malfunctioning CPU but none of the common issues seem to be present. You have not configured overclocking. There is no overheating. The CPU is seated correctly and locked into its socket. What can you do to definitively determine if the CPU is causing the system crashes?

Replace the suspect CPU with a known good CPU of the same make and model.

Windows 10 features a storage solution called Storage Spaces. When you configure Storage Spaces you can include information redundancy with a feature called data resiliency. Match the types of data resiliency on the left with the appropriate descriptions on the right. Each type of data resiliency may be used once, more than once, or not at all.

Requires that you have at least three storage devices - Parity Requires at least five storage devices - Three-way mirror Does not provide redundancy - Simple Protects you from a single storage device failure - Two-way mirror Requires at least two storage devices - Two-way mirror Allows you to reconstruct data if one of the storage devices fails - Parity Protects your data if two storage devices fail at one time - Three-way mirror Storage spaces can include data resiliency. Choosing an option that provides resiliency requires you to allocate space for redundant information. The options for storage spaces data resiliency include: -Simple, which does not provide redundancy. This option simply adds space from the storage pool to the storage space. When you select the Simple option, all of the data in the storage space is lost if one of the drives fails. -Two-way mirror requires at least two storage devices. The data is written to two devices. Two-way mirror requires twice as much device space as the amount of storage allocated to the storage space. This option protects you from a single storage device failure. -Three-way mirror requires at least five storage devices. The data is written to the three storage devices. This option provides redundancy for the data if two storage devices fail at one time. -Parity requires that you have at least three storage devices. This option uses parity information to reconstruct data if one of the storage devices fails. Parity uses less space for redundancy than the mirror options, but performance is not as good as the mirror options if a device failure occurs. Parity requires only 50 percent more redundancy space than storage space.

On a Windows 10, using Storage Spaces eliminates the need for which of the following tasks? (Select two.)

Resizing volumes Repartitioning drives Storage spaces eliminates the need for such tasks as: -Repartitioning drives -Resizing volumes -Backing up data in order to repartition

A user installs a new graphics application on her Windows system. During the installation process, the application prompts the user to load a custom video driver that has been optimized for the application. She does so and then completes the installation. Several days later, the user reports that her display doesn't seem to be working properly under some conditions. To fix the problem, you need to reload the old video driver. Which of the following actions are the BEST choices? (Select TWO). Boot from the Windows installation media and select the Startup Repair option. Revert the system to a restore point prior to installing the video driver. Boot to advanced startup menu and select Last Known Good Configuration. Use Device Manager to disable the video driver. Use Device Manager to roll back the video driver.

Revert the system to a restore point prior to installing the video driver. Use Device Manager to roll back the video driver.

You have just installed a new hardware device, upgraded the driver, and installed the custom software that came with the device. Now you can't get the device to work. Which of the following troubleshooting steps is the BEST to try first? Run any diagnostic software that came with the device. Remove and then reinstall the device. Install the drivers that came on the installation CD. Try installing the device in another system.

Run any diagnostic software that came with the device.

You have recently been called to troubleshoot network connectivity problems at a user's workstation. You found that the network cable runs across high traffic areas on the floor, causing the cable to wear through and break. You have replaced the cable with a plenum-rated and shielded twisted pair cable. You would like to minimize the problem and prevent it from happening again.Which of the following will best protect the cable from further damage?

Run the cable through the ceiling area instead of across the floor

Which interface is primarily used for internal hard drives in modern desktop PC systems?

SATA

Which of the following is the most common disk interface used for optical drives on home and office computers?

SATA

Which generation of SATA storage devices does the following? - Supports up to 6 Gbps data transfer rates - Addresses solid state drives

SATA3 Explanation: SATA3 supports up to 6 Gbps. It mainly addresses solid state drives with SATA.

Which protocol is used to send email messages from a mail client to a mail server?

SMTP

Match each port number on the left with its associated protocols on the right.

Secure Shell (SSH) 22 Apple Filing Protocol (AFP) 548 HTTP over SSL (HTTPS) 443 Hypertext Transfer Protocol (HTTP) 80 Server Message Block (SMB/CIFS) directly over TCP 445 Service Location Protocol (SLP) 427 Internet Message Access Protocol (IMAP) 143

Which optical media has the greatest storage capacity?

Single-layer, single-sided Blu-ray disc.

(3.3.6) Houses the PCI bus controllers and communicates with the Super I/O controller.

Southbridge

(3.3.6) You are in the process of installing a motherboard in a mystery case. Which of the following object should you place between the motherboard and the system case?

Standoffs

Which of the following topologies connects each network device to a central hub? 1) Bus 2)Star 3)Ring 4)Mesh

Star

While setting up a home office, a technician disables the DHCP service on the office router, but does not want to rely on link-local addressing. Which of the following IP addressing methods should be used? 1) Alternate 2)APIPA 3)Static 4)Dynamic

Static

A host on your network that provides a service that requires the server to always use the same IP address. Which IP addressing method can you use to manually assign the specific IP address? 1)Link-local addressing 2)Dynamic IP addressing 3)Static IP addressing 4)APIPA IP addressing 5)Alternate IP configuration

Static IP Addressing

On a Windows 10 workstation, you want to use the Storage Spaces feature to create a logical drive. Which of the following components are used to configure Storage Spaces? (Select three.)

Storage devices, which are physical drives such as SATA drives or external drives. Storage spaces, which are logically defined units created from a pool of storage. Pools of storage, which are logically created from free space on storage devices. Storage spaces are comprised of three components: -Devices are the hard disks or other types of storage form which storage pools are created. You can use a variety of devices such as SATA drives and external drives to create storage pools. -Pools of storage are created from the available disk space. A pool is a logical concept composed of the free space available on the specified storage devices. -Storage spaces define logical units of space created from a pool. One or more storage spaces can be created from the pool. To the Windows system and the user, storage spaces appear as disks with typical drive letters (e.g., E: drive, F: drive). Parity, thin provisioning, and data resiliency are benefits of Storage Spaces.

Dynamic Disks

Support up to 128 volumes

Drive is connected to a USB 2.0 Port, which does not have enough power for the drive

Susan works in the research and development department. She has recently purchased a large high-speed external drive and has attached the drive to her computer using a USB cable. her drive requires a minimum bandwidth of 400 Mbps and at least 900 miliamps (mA) to function. Although the correct drivers are installed, the drive is not functioning. To troubleshoot the problem, she has connected her drive to her coworker's computer where the drive functions properly. No additional cables are required for this drive. Which of the following is the most likely reason Susan's external drive is not working?

What device is used to create a physical star topology? 1)Bridge 2)Repeater 3)Switch 4)Router

Switch

You have installed a device in your system and the system does not recognize the device. What BEST describes why the device was nit discovered?

The device does not support plug and play

The USB mouse receiver is not plugged into the computer

The marketing department has hired a new employee. Prior to the new employee's first day at work, you have set up and configured a new laptop computer. The computer and all of the peripherals were purchased from the same vendor. After the new employee begins work, you receive a phone call stating that the wireless mouse is not working. Which of the following is the most likely reason the mouse isn't working?

(3.2.6) You are servicing a client's computer that has been randomly restarting. You decide to test the power supply using a multimeter. You connect the positive lead to the yellow wire on one of the Molex connectors. Which action should you take based on the multimeter reading. (shown in the diagram)?

The power supply is failing and should be replaced.

Which of the following is a characteristic of extended partitions? 1.) There can be multiple extended partitions per drive. 2.) They are bootable. 3.) They can be set to active. 4.) They are subdivided into logical drives

They are subdivided into logical drives

Your company has decided to use only SATA drives in their systems. What is true of MOST newer SATA drives?

They can be added to or removed from a system without shutting down the computer

1.) Properly identify the motherboard 2.) Download the flash utility or tool from the manufacturer's website

To fix a problem you are having with your PC, you have determined that you must flash the computer's BIOS. Which of the following would most likely need to be completed prior to flashing the BIOS?

(3.2.6) Your company relocated you to their United Kingdom office in London. You brought your personal computer with you and are in the process of setting it up. Your computer was previously configured to receive 110 V AC, but the electricity in London uses 230 v AC

Toggle the voltage switch on the power supply to the different voltage.

You are a software developer, and you are creating a multimedia streaming application. Data will be streamed from your streaming server to streaming clients over IP networks. Which transport protocol should your application use to send data between the clients and the server?

UDP

For what type of device will you typically install the driver before you connect the device to your system?

USB devices

(3.2.6) You have a desktop computer that uses a 250 watt power supply. You recently added a 4-disk RAID 10 array to the system and now it spontaneously shuts down. What should you do?

Upgrade to a power supply that provides more watts.

(3.1.3) You work as the IT administrator for a small corporate network. One of the company employees needs to add an additional PCI card to the motherboard. When you open the computer, you see that the card purchased will not fit due to the cards height. Which of the following is the BEST method for using the newly purchased card?

Use a riser card to allow the new card to be installed parallel to the motherboard

(3.2.6) You are building a new computer from both new and used parts. The video card is a PCIe video card that requires an 8-pin power connector. However, your power supply doesn't have an 8-pin. PCIe power connector. Which solution would be the least expensive option for your system?

Use an adapter cable to connect two 4-pin Molex connectors to the 8-pin PCIe.

You want to combine storage space from two different hard disks into a single logical storage unit on your Windows computer. What is the best step to prform?

Use dynamic disks and a spanned volume

You work for a small company as human resource specialist. Since the company is fairly small you are maintaining all of the employee information on your desktop computer which is running windows 10. This computer has two high-capacity hard disks. Do you want to ensure that this information is protected from my hard disk failure, so you want to set up a Windows software raid system. Which of the following would be your best solution?

Use mirrored volumes

Basic Disks

Use primary and extended partitions

(3.1.3) You decided to upgrade your PC with a faster processor. To do this, you ordered a new motherboard over the Internet that support the processor you want to use. When it arrives, you discover that the motherboard uses the Micro-ATX form factor. Your current case is an ATX mid-tower with a standard ATX motherboard inside. What should you do?

Use the Micro-ATX motherboard in the ATX case

A few of your employees have complained that their computers sometimes shut down spontaneously. You have noticed that these employees all work in a part of the building where the air conditioning does not adequately cool the room. These employees also use CPU-intensive programs. You suspect that the shutdowns are caused by overheating. What is the simplest way to monitor the temperature of the computer's CPU?

Viewing the temperature from within the BIOS

You are a network tech for a small company. One of your responsibilities is to ensure that all new hardware is connected and functioning properly. You have several different types of connections that are used for various types of hardware. One of the types of cable available to you is an RJ45 cable.

Voice over IP connection

Buffered

What type of RAM might slow system performance because it holds memory addresses or data to improve stability on systems with more than 1 GB of RAM before it is transferred to the memory controller?

1.) The gasses inside the cells are sensitive to air pressure fluctuations 2.) They generate much more heat than other display types

What are the disadvantages of plasma display technologies?

NTFS-format partition

What is required to control access to the file system using file and folder permissions on a Windows-based computer?

MicroUSB

What is the connector type?

USB 2.0 Type A

What is the connector type?

USB 2.0 Type B

What is the connector type?

USB 3.0 Micro B

What is the connector type?

USB 3.0 Type B

What is the connector type?

miniUSB

What is the connector type?

5 Gbps

What is the maximum data transfer speed for USB 3.0 Devices?

POST

What is the name for the routine that tests the motherboard, memory, disk controllers, video, keyboard and other system hardware?

Saves information about system devices

What is the role of the CMOS in a modern computer?

Non-volatile memory chips

What method does an SD card use for storing data? - Magnetic tape - Reflective surface and optical readers - Non-volatile memory chips - Magnetic disks and platters

Whenever a BIOS update provides functionality not currently supported that is required by the operating system or hardware.

When do you need to upgrade the system BIOS?

Hyper-Threading

When using Intel chips, which of the following features best allows a single processor to run two threads in parallel instead of processing single threads linearly?

The CMOS battery has failed

When you boot the computer, it hangs after asking you for the current time and date. What is the most likely problem?

basic dynamic

Which disk types does Windows support? (Select TWO)

UEFI

Which of the following 1.) BEST describes the technology designed to replace the BIOS and 2) is a firmware solution for controlling the startup process and loading the computer operating system into memory?

A CPU socket is a single connector between a microprocessor and the motherboard

Which of the following BEST describes the purpose of a CPU socket?

1.) Faster startup times 2.) Supports 64-bit firmware device drivers 3.) Supports drives larger than 2.2 TB

Which of the following are benefits UEFI provides that BIOS does not?

1.) The memory controller must support dual-channels 2.) Bandwidth is increased by 5-15%

Which of the following are true regarding a dual-channel memory bandwidth configuration?

EEPROM Chips

Which of the following components is a non-volatile memory technology for saving system settings when the computer is powered off?

BIOS/UEFI

Which of the following components is an example of firmware?

CMOS Battery

Which of the following components is necessary to keep the real-time clock running?

You are setting up the drive to boot Windows 10 on a computer that uses traditional BIOS

Which of the following conditions would prevent you from using a GUID Partition Table (GPT) when setting up a disk drive?

Ethernet over Power

Which of the following devices allows networks communications to be transmitted over existing AC power lines?

Power over Ethernet

Which of the following devices can be used to distribute electrical power along with network data on twisted-pair Ethernet cabling (CAT 5 or higher)?

Disk Defragmenter

Which of the following disk maintenance utilities optimizes the performance of your hard drive by joining parts of files that are in different locations on your hard drive into a single location? • Check Disk • Disk Defragmenter • Disk Management • Disk Cleanup

Check Disk

Which of the following disk maintenance utilities optimizes the performance of your hard drive by verifying the file system integrity of a hard disk and fixing the errors it detects? • Disk Cleanup • Disk Defragmenter • Check Disk • Disk Management

Disk Cleanup

Which of the following disk maintenance utilities will locate and dispose of files that can be safely removed from the disk? • Check Disk • Disk Management • Disk Cleanup • Disk Defragmenter

1.) LCD 2.) LED

Which of the following display technologies require back lighting?

PCI

Which of the following expansion buses is most commonly used for devices such as sound cars, modems, and network cards? • VESA Local Bus • ISA • PCI • AGP

PCIe

Which of the following expansion buses uses a point-to-point dedicated connection and provides a serial full-duplex method of transmission? • PCIe • PCI-X • AGP • PCI • VESA Local Bus

Multiple processor sockets on the motherboard

Which of the following is a characteristic of a multi-processor system?

CMOS

Which of the following is a general term for the program that holds system information related to computer startup?

Hard disk

Which of the following is a magnetic storage devices? - DVD - Flash device - Hard disk - Solid state drive

Ethernet

Which of the following is a wired networking method most commonly used today by desktop PC's and other network devices to connect to a local area network?

inexpensive

Which of the following is not an advantage of SSDs over HDDs? - Inexpensive - Low power consumption - Small and light - Durab;e

(3.2.6) You have a desktop computer that you want to upgrade. You add several internal components and external components. You realize that you need to ensure that your power supply can support all of the new devices.

Which power supply rating is used to determine this?Watt rating

Hard disk

Which storage device uses aluminum platters for storing data? - DVD disc - DLT tape - CD-ROM disc - Hard disk - SD Card

Active

Which system type identifies the partition as one that holds the boot loader program used to start the operating system?

10GBaseER single-mode

Which type of fiber optic cable supports 10 Gigabit Ethernet with a maximum segment length of up to 40km?

DiskPart

While configuring a computer, you find that you need to create, format, and manage the partitions and volumes on your hard drives. Which of the following is the BEST command line utility to use?

It would be too cost prohibitive to manufacture plasma screens under 32 inches

Why are plasma displays smaller than 32 inches not typically sold?

CAS Latency

With a memory module read request, there is a delay between the time of the data request and the time the data is available for output from the memory module.

Active Heat sink, thermal paste, liquid pipes, and fan

You are a high school student learning about computers and how to build the. As a class project, you have built a new computer. You power on your computer and begin to configure the system, After a short while, you notice smoke coming from the PC, and shortly after that, the computer stops working. After removing the computer case, you see that the CPU and surrounding areas are burnt and very hot. You realize that the costly mistake you made was not using a heat sink. When rebuilding your computer, which of the following cooling systems would MOST efficiently remove heat from the CPU?

Duplicate these displays

You are a trainer for your company and often teach courses in a classroom located on-campus or in a hotel conference room. In your office, which is seperate from the classroom, you have two external monitors connected to your laptop, and you are able to display different content on each monitor. However, when teaching, you only have your laptop and a projection unit. To make teaching easier, you want the same content to show on both the laptop monitor and the projection screen. Which of the following multiple display options would be best to select when teaching?

chkdsk /?

You are an IT administrator troubleshooting a computer from within the Windows command prompt. You are trying to execute the chdsk command line tool, but it keeps failing. Which of the following switches would give you the BEST information or help on how to run this command?

USB

You are an IT technician for your company. As part of your job, you must manage and support a wide variety of devices Which of the following is the most common interface for peripheral devices?

1.) Digital Cameras 2.) Smart Phones

You are an IT technician for your company. As part of your job, you must manage and support a wide variety of devices. Which of the following devices most likely uses a Micro USB connector?

Use an adapter cable to connect two 4-pin Molex connectors to the 8-pin PCIe connector.

You are building a new computer from both new and used parts. The video card is PCIe video card that requires an 8-pin power connector. However, your power supply doesn't have an 8-pin PCIe power connector. Which solution would be the least expensive option for your system?

electrostatic discharge (ESD)

You are in a carpeted office lighted by fluorescent bulbs. You are preparing to add memory modules to a user's copmputer. The user has already unpacked the memory modules and stacked them on top of an old, unused CRT monitor. In this environment, what is the greatest threat to these memory modules?

lower memory and processor resource use

You are in the process of preparing a storage device and must determine which file system to use. Which of the following BEST describes the advantage of using the exFAT file system rather than NTFS?

1.) Typically, An AMD uses a Pin Grid Aray (PGA) socket type 2.) Typically, AMD chips are less expensive

You are in the process of purchasing several new computers to replace broken or outdated computers. After much research, you have determined to purchase computers that use AMD sockets. Which of the following BEST describes an AMD and why you would select this option?

- An SSD uses flash technology to store data - An SSD opens files faster than an HDD

You are in the process of purchasing several new windows-based computers to replace broken or outdated computers. You have heard that solid state drives (SSDs) can significantly increase the overall performance of the system. Which of the following best describes the features of solid state drives (SSDs) compared to hard disk drives (HDDs)? (Select two). - An SSD can be adversely affected by magnetism - An SSD has the best Mean Time Before Failure (MTBF) - SSD spindles spin at a faster rate than HDD - An SSD uses flash technology to store data. - An SSD opens files faster than an HDD. - An SSD stores a large amount of storage cheaply.

Full format

You are installing Windows 10 on a drive that was previously used for Windows 8.1. This drive has one primary partition. While installing Windows, you want to ensure that the old files are deleted and any bad sectors are located and marked as bad. To achieve your desired goal, which of the following is the BEST option to run?

LCD display with TN panel

You are putting together a gaming system and need to make sure you get a display that meets your needs. The display needs to have a very good response time, and you would prefer that it be affordable and power-efficient. Which of the following types of display will most likely meet these needs?

LCD display with IPS panel

You are putting together a system for a graphic artist and need to make sure you get a display that meets her needs. The display needs to have very good color reproduction quality and viewing angles. The display needs to run cool and be power-efficient. Which of the following types of displays will most likely meet these needs?

Replace the power supply because it is failing

You are servicing a client's computer that has been randomly restarting. You decide to test the power supply using a multimeter. You connect the positive lead to the yellow wire on one of the Molex connectors. Which action should you take based on the multimeter reading. (10.24 Volts)?

1.) Check the motherboard documentation to find which modules are supported 2.) Purchase additional modules that are the same as what is currently installed

You have an existing system that has a single DDR3 memory module installed. You would like to add more memory to the three remaining empty memory slots. What should you do to make sure you get the right memory for the system?

Replace the power supply

You are testing the power supply in a PC system by measuring the voltage available on the 4-pin Molex connector. The voltage on the Yellow wire is +10.1 Volts. What should you do?

Nothing. the power supply is working normally

You are testing the power supply in a PC system by measuring the voltage available on the 4-pin Molex connector. The voltage on the red wire is +5.1 volts. What should you do?

1.) +/- 5V 2.) +/- 12V

You are trying to troubleshoot a power supply issue with a voltmeter. Which of the following options are common voltages produced by a desktop power supply?

upgrade the disk to a dynamic disk

You have an extra disk on your system that has three primary partitions and an extended partition with two logical drives. You want to convert the partitions to simple volumes, preferably without loosing any data. Which of the following is the BEST step to perform?

3 GB

You have a computer that has four DDR2 memory slots. Currently there are two 512 MB memory modules installed. You check the motherboard documentation and find that the system has a 4 GB memory limitation. You want to add as much memory as possible without replacing the existing modules. What is the maximum total amount of RAM that can be installed on this system?

All memory will operate at 300 MHz

You have a computer with a Pentium 4 CPU and two PC-2400 DDR modules. The motherboard has room for two additional memory modules and you'd like to install two PC-4000 modules. Which of the following statements is true?

Install the application normally

You have a computer with a dual core 64-bit processor that uses the x86-x64 instruction set. You want to install the 32-bit application on the computer. Which of the following best describes the action you should perform?

Upgrade to a power supply that provides more watts

You have a desktop computer that uses a 250 Watt power supply. You recently added a 4-disk RAID10 array to the system and now it spontaneously shuts down. What should you do?

Watt Rating

You have a desktop that you want to upgrade. You add several internal components and external components. You realize that you need to ensure that your power supply can support all of the new devices. What should you do?

90 Watts

You have a laptop with a dual core processor with the following characteristics: * 1024 MB L2 cache * 125 Watts * 45nm process size You want to upgrade the processor to one that uses less power. Which of the following characteristics would most likely identify a processor that uses less power?

extended partitions with logical drives primary partitions

You have added two new hard disks to a Windows computer. The disks are configured as basic disks. Which of the following could be configured on these disks? (Select TWO)

Upgrade to a 64-bit version of windows

Your motherboard has two memory slots and supports a maximum of 8 GB of RAM. After installing two 4 GB modules and booting your system, you find that Windows only recognizes 3.5 GB of RAM. What should you do first?

1.) Flash the UEFI Firmware 2.) Reinstall the old processor in the motherboard

You have been using the same computer for several years. To extend its service life, you decide to upgrade the processor. You check the motherboard documentation and purchase the fastest processor supported by the motherboard. However, When you start the computer, it beeps regularly and nothing is displayed on the screen and it doesn't start. Which of the following actions would most likely rectify this issue?

Update the UEFI firmware

You have been using the same computer for several years. To extend its service life, you decide to upgrade the processor. You check the motherboard documentation and purchase the fastest processor supported by the motherboard. However, when you start the computer, it beeps regularly, nothing is displayed on the screen, and it doesn't start While troubleshooting this computer, which of the following would be BEST to try first

FAT32

You have just purchased a new USB drive that you want to use to troubleshoot the computers in your company as well as other network devices, such as printers and projectors. you need to format this new drive with a file system that will be recognized and used on all devices. When formatting your USB drive, which of the following file system types would meet MOST, if not all, of your needs?

F-type

You have just signed up for a broadband home Internet service that uses coaxial cable. Which connector type will you most likely use?

Change the screen resolution to the native resolution of the monitor

You have purchased a 1600x1200 LCD monitor and connected it to the DVI-I port on your computer using a DVI-D cable. You configure the screen resolution at 1280x1024 with 24-bit color. The display output seems to be fuzzy and stretched. Which of the following best describes the action you should take to correct the problem?

Change the screen resolution to the native resolution of the monitor

You have purchased an LED monitor and connected it to the DVI-I port on your computer using a DVI-D cable. You configure the screen resolution to 1440 x 900 with 32-bit color. The display on the screen seems to be pixilated. Which of the following solutions is most likely to fix this problem?

Set the display resolution to the native resolution of the monitor

You have purchased an LED monitor and connected it to the HDMI port on your computer using an HDMI cable. You configure the screen resolution to 1280x1024 with 32-bit color. the geometry of the images displayed on the screen appear to be distorted. What should you do to correct the problem?

Set the display resolution to the native resolution of the monitor

You have purchased an LED monitor and connected it to the HDMI port on your computer using an HDMI cable. You configure the screen resolution to 1280x768 with 32-bit color. The images displayed on the screen appeared to be overly large. What should you do to correct the problem?

100 meters

Your network follows the 1000Base-T specifications for Gigabit Ethernet. What is the maximum cable segment length allowed?

hard disk

You need a storage device that has very large storage capacity, is fast, and is relatively inexpensive. Which storage device will best suit your needs? - USB flash drive - SSD - Hard disk - Optical

Install the scanner drivers and then connect the scanner to the USB port and complete the Add a Device wizard when it pops up

You need to connect a new USB scanner to the USB port on your computer. However, the first time you plugged the scanner in, it was not recognized. What should you do?

1.) Output Wattage 2.) Type and number of connectors 3.) Form Factor

You need to replace the power supply in your home desktop computer. Which of the following specifications are the most likely to affect your power supply choice?

1.) Processor Connector 2.) Output Wattage 3.) Form Factor

You need to replace the power supply in your home desktop. As you choose the replacement power supply, which of the following specifications are the most likely to affect your choice?

In which of the following situations would driver rollback be the BEST tool to use? You recently installed a new application, and now the system behaves erratically. You recently installed a new video driver, and now the system behaves erratically. You accidentally deleted several important emails from Outlook and need to restore them. You need to restore several driver files that were accidentally deleted.

You recently installed a new video driver, and now the system behaves erratically.

Set the visual effects for best performance

You recently upgraded a client's older workstation from windows 7 to windows 10. The client has called to complain that the interface is very slow. For example, after clicking on the start button, the start menu slowly appears on the screen Which of the following will most likely fix this problem without requiring a hardware upgrade?

64-bit Processor

You want to build a new system that supports 6 GB of memory

shrink the primary partition

You want to set up a Windows system to also be able to boot to Linux. To be able to dual boot, the system needs a partition on which to install Linux. However, you don't have an extra hard disk that can be used for the Linux partition. The existing disk has no unpartitioned space available, but it has about 300 GB of free space. Which of the following disk management operations will BEST prepare your hard disk for dual boot?

The type of memory that is supported by your motherboard

You want to upgrade all memory in your system with the fastest memory available. Which of the following should you choose?

Buffered memory reduces the load on the memory controller and allows the system to be more stable

You work as the IT administrator for a small corporate network. Sam, an employee in the support department, wants to run a virtual machine on his computer to troubleshoot customer issues from, and he needs a very stable computer from which to work. You need to decide whether to install buffered or non-buffered RAM in his computer. Which of the following best describes the reason to choose buffered instead of un-buffered memory for this new computer?

Configure computer for dual monitor setup

You work as the IT administrator for a small news station. Jill, an employee in building 2, works in the audio/video editing department and would like to increase her productivity. For example, she would like to be able to run multiple programs simultaneously and be able to compare video clips side-by-side. Which of the following configuration changes would provide the BEST solution for Jill?

The fan has no power

You work at a computer repair store. You just upgraded the processor in a customers computer. The computer starts, but it shuts down shortly after starting windows Which of the following is most likely causing the computer to automatically shut down?

Operating System

You would like to upgrade the processor in your system to a 64-bit processor. Which of the components will you most likely need to upgrade as well to take full advantage of the new processor?

Download and install the latest driver from the video card manufacturer's website

You've installed a new video card in a user's windows workstation. When the system is powered on, the screen is displayed in 16 colors at 640x480 resolution. Which of the following will best resolve this problem?

Configure a screen saver on each system

You've just purchased 10 new notebook systems for your users. You are concerned that users will leave the systems on for long periods of time, which could result in display burn-in What should you do to prevent this from happening?

The device will work, but will only transfer at USB 2.0 speeds

Your company has just upgraded your laptop computer. After receiving your new computer, you plug your external USB 2.0 Hard disk into your new USB 3.0 port. Which of the following is the most accurate statement regarding how this device will function?

Toggle the voltage switch on the power supply to the different voltage.

Your company relocated you from the United States to their United Kingdom office in London. You brought your personal computer with you and are in the process of setting up. Your computer was previously configured to receive 115 VAC, but the electricity in London uses 230 VAC. Which of the following would allow your computer to run on 230 VAC?

• Upgrade to a 10,000 RPM hard disk • Upgrade your hard disk interface to SATA 3

Your computer currently uses a 5,400 RPM hard disk. You want to improve your computer's overall performance by optimizing your hard disk performance. Which of the following would be the most effective means for optimizing your hard disk performance? (Select two.) • Upgrade your hard disk interface to SATA 2 • Upgrade to a 10,000 RPM hard disk • Upgrade your hard disk interface to SATA 3 • Implement RAID 0 on the current hard disk • Upgrade your hard disk interface to eSATAp • Upgrade to a 7,200 RPM hard disk

Replace the existing processor

Your computer has one single core processor installed. The motherboard supports processors with up to four cores. You want to upgrade your computer to a dual-core system. Which of the following will by part of your configuration?

Increase the color depth

Your monitor is displaying images in strange colors Which of the following is most likely the solution to this problem?

You have a computer with an onboard LAN adapter. The LAN adapter has failed, and you are unable to connect the computer to the network. What should you do?

add a network card using the PCI slot

Basic Disks

are supported by all operating systems

Joseph has started using virtual machines (VMs) to help his software development process. As the number of VMs has increased, Joseph has noticed that his hard drive is almost full. He would like you to buy and connect an external hard drive where additional VMs can be stored. When the drive arrives, you find it has the type of connector show in image 1. Which type of connector is on the external hard drive?

eSATA

You want a storage device that has the ability to: - Integrate data and device power into a single cable - Use a connector and port that is neither L-shaped nor rectangular Which of the following SATA devices is the BSET to use?

eSATAp Explanation: Known as Power over eSATA is meant to replace eSATA. It combines the functionality of eSATA and USB ports with a source of power in a single connector.

which of the following hardware devices regenerates a signal out all connected ports without examining the frame or packet contents?

hub

Which of the following describes how a switch functions?

it connects multiple cable segments or devices and forwards frames to the appropriate segment

Basic Disks

only support volumes made up of contiguous disk space

AN 8 port switch receives a frame on port number 1. The frame is addressed to an unknown device. What will the switch do?

send the frame out ports 2-8

Dynamic Disks

store partitioning information in a hidden database on all such disks in the system

Dynamic Disks

support volumes that use discontiguous disk space

A technician determines that an older network hub that connects 24 workstations performing poorly due to excessive network collisions.

switch

Which of the following LAN devices receives a signal on one port and forwards that signal only to the port where the destination device is connected?

switch

How do switches and bridges learn where devices are located on a network?

when a frame enters a port, the source MAC address is copied from the frame header


Ensembles d'études connexes

Chapter 3: Project Management Process Groups

View Set

Section 8, Unit 3: FHA Loans and the Consumer Workshops

View Set

Nursing Care of the Newborn 1235 eaq pain

View Set