AC Exam Chapter 4

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

Which csi technical specification part would contain information about which submittals were required? A. Part 1 B. Part 2 C. Part 3 D. Part 4

A. Part 1

which of the following types of equipment is most suitable for excavation of a standard residential basement? A. excavator B. loader C. scraper D. dragline

A. excavator

uniformat seven divisions: list

A. substructure B. shell C. interiors D. services E. equipment and furnishings F. special construction and demolition G. building sitework

which of the following is not a type of pile installed by pile driving? A. cofferdams B. precast concrete pile C. cast-in-place concrete pile D. metal pile

C. cast in place concrete pile

where is the best location to look to determine the electrical requirements for a project's chillers? A. contract B. details C. schedule D. specifications

C. schedule

Division 03

Concrete

Division 14

Conveying Equipment

Division 00

Procurement and Contracting Requirements

Division 15 and 16

Reserved for future expansion

Division 13

Special Construction

Division 10

Specialties

Division 07

Thermal and Moisture Protection

Division 06

Wood, Plastics, and Composites

part 1, general, provides

a description of the work, submittals required, and any inspections or testing needed to be performed by the contractor

positive displacement pumps create

a vaccuum internally and are used for low volume applications

a sheepsfoot roller is most suitable for compaction of which type of soil? a. clay soils b. gravel c. sandy soils d. topsoil

a. clay soils

which of the following types of aerial work platforms is most suitable for installing fire sprinkler piping inside of a building? a. slab scissor lift b. rough terrain scissor lift c. straight boom manlift d. mast boom lift

a. slab scissor lift

manlifts

able to lift workers vertically at a horizontal distance away from and rotate around the main body of the lift. Two main types: straight boom and articulating boom

scissor lifts

able to lift workers vertically. Cross-supported scissoring mechanism. May have smooth wheels or rough terrain tires

mast boom lifts

able to lift workers vertically. raises and lowers workers in a basket connected to a retractable mast. point of use lifts, unable to be moved when in use. Typically smaller than other types of aerial work. Commonly used where space is limited and work can be completed at a single location

rough terrain shooting boom forklifts

able to move and lift loads vertically and horizontally. shooting boom forklifts have a telescoping and tiltable mast. commonly used for material handling at job sites.

rough terrain straight mast forklifts

able to move and lift loads vertically. better for larger rough terrain, used for loading and off loading deliveries at a job site

industrial forlifts

able to move and lift loads vertically. used on only smooth level surfaces

rammer tamper

aka jumping jack; stand-alone piece of equipment powered by a gasoline engine that compacts material by mechanically delivering vertical blows and is self-propelled in that each blow moves the tamper slightly ahead to contact new material

manual tamper

often a simple pole with a flat, heavy metal plate affixed to the end. compacts material by manually delivering vertical blows.

Division 08

openings

articulating boom manlifts

raise and lower workers in a basket connected at the end of a multijointed boom

straight boom manlifts

raise and lower workers in a basket connected at the end of a straight boom

vibratory hammer pile

rapidly vibrates the head of the pile in an dup and down cycle. Fastest type

drop hammer pile driver

simplest type. consists of heavy weight that is raised by cable along a guided track and then dropped freely onto the head of the pile

three common classifications of loaders

skid steer, wheel, track

sheet pilings, cofferdams, and tiebacks are commonly used to

stabilize the sides of open excavations and work areas

cofferdams

temporary enclosures primarily used to hold back water for activities requiring a dry work area. commonly used in bridge construction. more commonly constructed using sheet piles with structural bracing or a combination of earthen embankments with sheet pilings

crane capacity rule of thumb:

the heavier and farther from the crane the load is, the less the crane's capacity

part 2, products, provides

the technical specification of all the material or equipment described in the selection

dozer

tractor like piece of construction equipment equipped with a front-mounted blade. Used in clearing/leveling of a job site

backhoe

tractor-like piece of equipment hat consists of a two-part articulated arm and bucket. Commonly used in shallow and narrow trench excavations, utilities, and material handling

hydraulic submersible pumps

use hydraulics to power the pumps and are ideal when the pump can't be physically placed near the water source.

personnel and material hoists

used to transport workers and material vertically in a multistory building. rail will support one or two cars

mechanical hammer pile driver

uses a mechanical actuated piston and hammer to drive the pile into the ground

pile jetting

uses pipes to deliver concentrated jets of water or air to loosen the soil directly beneath the piling

pile drillers

utilize a large steel auger to bore a hole into the ground that can then be filled with concrete

grader

wheeled piece of equipment with a center-mounted angled blade. primarily used to finish level grade.

loader

wide front-mounted bucket that can be raised, lowered, and dumped. commonly used for landscaping, material handling, and loading of stockpiled materials into trucks to be hauled. Three common classifications (skid steer, wheel, track). Skid steer are most common.

Division 01

General Requirements

The most significant changes between the 16- and 50- division formats are changes in divisions

2, 15, and 16

CSI 50 Division Format. List 00-16

00. Procurement/General Contracting Req. 01. General Requirements 02. Existing Conditions 03. Concrete 04. Masonry 05. Metals 06. Wood, Plastics, Composites 07. Thermal + Moisture Protection 08. Openings 09. Finishes 10. Specialties 11. Equipment 12. Furnishings 13. Special Construction 14. Conveying Equipment 15. Reserved for Future Expansion 16. " "

two of the most common types of mobile cranes

1. crawler 2. vehicle mounted

two types of cranes in construction

1. stationary 2. mobile

isometric drawings are drawn so that the plan view is turned _________ and the elevation ___________ from the horizontal axis

90, 30

using figure 4-12, what is the maximum load o f a crane if the boom is at an angle of 40 degrees and extended 53 feet? See p. 61 A. 4640 lb B. 5030 lb C. 13010 lb D. 80000 lb

B. 5030 lb

in which csi division is information about structural steel located? A. Division 01 B. Division 05 C. Division 10 D. Division 15

B. Division 05

Which CSI division significantly changed with the 2004 50-division format change? A. Division 01 B. Division 05 C. Division 10 D. Division 15

D. Division 15

Division 02

Existing Conditions

Division 04

Masonry

Division 05

Metals

which of the following types of excavation equipment is most suitable for final grading of a roadway? A. dozer b. grader c. loader d. backhoe

b. grader

what is an advantage of a tower crane? a. it is easily moved from one location to another on the job site b. its operator has an unobstructed view of the site c. several mobilizations and demobilizations per project are common d. its setup time is fast

b. its operator has an unobstructed view of the site

excavators characterized by

boom, stick, bucket

Which of the following types of excavation equipment is most suitable for removing and stockpiling on site 2 ft of soil from 1 acre of excavation area? A. excavator B. Loader c. scraper D. dragline

c. scraper

which of the following types of compaction equipment is the most suitable for compacting the granular base of a large parking lot? A. tamper b. plate compactor c. smooth wheel roller d. sheep's foot roller

c. smooth wheel roller

mobile crane

capable of moving from one place to another without being disassembled. Include many different types of cranes, including crawler, vehicle-mounted, aerial, floating, etc. Typically have either a lattice/truss style boom or telescoping hydraulic boom that can be raised, lowered, and rotated around the base of the crane.

dash then dot lines are used for

center lines

part 3, execution, provides

clarification on how material and equipment re to be installed

centrifugal pumps

commonly used for open water with high concentrations of debris and trash

sheepsfoot rollers

compact material by use of a heavy metal drum with projecting metal knobs or feet. Create kneading action that is more effective in compacting fine-grained soils such as clay. Commonly used to cover large areas

pneumatic rollers

compact material by use of ballast, typically heavy weights, placed over several highly inflated rubber tires

smooth wheel rollers

compact material by use of heavy smooth metal rollers and are often used to cover large areas quickly

vibratory rollers

compact material by vibrating a roller up and down as it moves across the surface of the material

dash, dot, dot line is used for

cutting planes

sheet piling

designed to stabilize the sides of open excavations by resisting the lateral pressure of soil and water

light solid line is used to show

dimensions, leaders, and extension lines

uniformat

divided into seven categories. alternative to CSI divisions

Division 11

equipment

crawler cranes

equipped with steel tracks that allow them to move around the job site at slow speeds. typically large in size and often have lattice/truss-style boom. usually require on-site assembly. Best for sites that require crane usage for an extended period of time or have significant lifting or multiple crane position requirements

tower crane

erected and disassembled in sections by mobile cranes. supported at ground level by concrete foundation or by the structural frame of the building. cab is located high above the job site, giving the operator an unobstructed view of the site. Make sure there is room to have one of these!

stationary cranes

erected and fixed to a single location on the job site. typically erected early in the project, not disassembled until all major lifting activities are complete. Most effective on sites that require a great amount of lifting activities around a central location. One of the most common types of stationary cranes is a tower crane.

dragline

excavates material by using a dragline (cable) to pull a bucket toward the crane. Advantage = excavation equipment is able to remain outside of the excavation

tieback bracing system

external bracing system that uses metal rods or wires anchored into the rock or soil outside of an excavation to support the face of an excavation. Provide larger clear work areas within the excavation. installed at an angle. Commonly used in urban areas where excavation for a building extends to the edge of a property

Division 09

finishes

FP stands for

fire protection (drawings)

Division 12

furnishings

most specifications are divided into three parts:

general, products, execution

tampers

hand operated devices that compact material by delivering a series of vertical blows.

plate compactors

hand or machine operated devices that consist of a flat, heavy meatal plate that is vibrated up and down to compact material

vehicle mounted cranes

have rubber tires, often an additional cab that allows them to be driven from one job site to another. May have a lattice/truss style boom that requires some on-site assembly or a telescoping hydraulic boom.

dashed lines are used for

hidden lines; above or below cutting plane

clamshell bucket

hinged bucket used to vertically excavate material. Commonly used in excavations below the surface of the water, such as cofferdams after sheet piling is installed

most modern excavators are powered by

hydraulics

three common types of forklifts used in construction

industrial forklifts, rough terrain straight mast forklifts, rough terrain shooting boom forklifts

sheet piles are typically used in a system or series of

interconnecting piles. interlock along vertical joints.

plumping and fire protection systems are commonly shown in

isometric drawings

forklifts are used in construction primarily for

job site material handling

scraper

multipurpose piece of equipment designed to excavate, load, haul, and discharge soil.

bold solid line is used to show

objects


संबंधित स्टडी सेट्स

Force and Motion Calculations (S=D/T and F=MA)

View Set

ACCT 218 | Chapter 5 & 6 | Test (Incomplete)

View Set

Medical-Surgical: Cardiovascular and Hematology

View Set