Diagnostic Test Characteristics

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

If you forget to tare (ie, reset to zero) a scale after placing a container on it, and then weigh the same thing on it multiple times, which measure will be affected: precision or accuracy?

If you forget to tare (ie, reset to zero) a scale after placing a container on it, and then weigh the same thing on it multiple times, accuracy will be affected, as all your measurements will have the same systematic error (the weight of the container), whereas precision should not be affected.

Which of the following is a required characteristic in a good screening test?

Low false negative rate => The goal of a screening test is to detect as many affected individuals as possible and minimize the number of false negatives (individuals with the disease that are missed

False positive rate

1-specificity

A decrease in ________ of the condition tested increases the test's NPV and decreases its PPV.

prevalence

_______is the proportion of individuals with the disease that are true positives (TPs). It's calculated as TP ÷ (TP + FN)

Sensitivity

SnOut:

Sensitivity (SN) rules Out (when the test is negative)

High accuracy, high precision

Darts are clustered in the same place, and are clustered in the bullseye

Low accuracy, low precision

Darts are scattered, and all around the dart board

If the diagnostic cutoff of a test is increased, which of the following changes will occur to the diagnostic test characteristics?

Increased positive predictive value => If the diagnostic cutoff is higher, fewer false positives will be seen, and the PPV will increase.

A screening test needs to be more ______

Sensitive

if a low cutoff value is chosen (eg, cutoff point A in Figure 5), the test will be more _____

Sensitive

Sensitivity Formula

TP/(TP+FN)

A positive screening test is therefore often not sufficient for diagnosis and requires a _________. This type of test needs to be highly specific to ensure that those with a positive result have a high likelihood of having the disease.

confirmatory test

The ________is the proportion of negative test results that are true negatives, or the proportion of individuals without the disease among negative tests

Negative predictive value (NPV)

A confirmatory test needs to be more ______

Specific

if a high cutoff value is chosen (cutoff point C), the test will be more ______

Specific

SpIn:

Specificity (SP) rules In (when the test is positive)

What is the most important diagnostic test characteristic for a screening test, and what is it for a confirmatory test?

A screening test needs to be sensitive, and a confirmatory test needs to be specific.

____is the ability of a diagnostic test to generate results that are true and free of systematic error or bias.

Accuracy

If the prevalence of a disease increases in a population, which of the following changes will occur to the diagnostic test characteristics?

Decreased negative predictive value => With increasing prevalence, a larger proportion of negative tests will be false negatives and the NPV will decrease.

If the positive predictive value of a test has increased in a population, does that mean the prevalence has increased or decreased?

If the PPV has increased, then disease prevalence has increased.

In summary, the following changes in diagnostic test characteristics occur when the prevalence changes:

Increase in prevalence: higher PPV, lower NPV Decrease in prevalence: lower PPV, higher NPV In both cases: no change in sensitivity or specificity

If a test is very specific, few individuals without the disease will have a positive test ______so most positive tests will be true positives, and the PPV will be high.

Low FP

_____(reliability) is a test's reproducibility, consistency, and the extent of variation in repeated results. If a test is precise, then the difference between repeated measures should be small. But that does not mean the test is accurate or valid—it could be reproducible but wrong!

Precision

Increasing a test's cutoff value will increase its ______and PPV but decreases its sensitivity and NPV.

Specificity

________ (true negative rate) is the proportion of individuals without the disease that are true negatives. It's calculated as TN ÷ (TN + FP)

Specificity

Positive predictive value (PPV)

TP / (TP + FP)

Rising the cut off

B=> C Increase in FN decrease in FP Increase in specificity=> Increase in PPV Decrease in sensitivity=> Decrease in NPV

. If a test is very sensitive, few individuals with the disease will have a negative test ________so most negative tests will be true negatives, and the NPV will be high.

Low FN

Negative predictive value

NPV = TN / (FN + TN)

Specificity gives you the ___ rate

True Negative Rate

Sensitivity gives you the ____ rate

True Positive Rate

____ Patient with the disease has a positive test result.

True positive (TP)

Decrease in prevalence

decrease PPV increase NPV

Specificity formula

TN/(TN+FP)

_____Patient with the disease has a negative test result.

False Negative (FN)

___Patient without the disease has a positive test result.

False Positive (FP)

_____is the proportion of positive tests that are true positives, or the proportion of individuals with the disease among positive tests.

Positive predictive value (PPV)

If the cutoff value of a test is changed to make it more sensitive, what will be the effect on the PPV?

The PPV will decrease; sensitivity has increased, meaning that the false positive value has increased.

Receiver Operating Curves

This compromise between sensitivity and specificity can be visualized on a receiver operating characteristic (ROC) curve

____Patient without the disease has a negative test result.

True Negative (TN)

____often is used interchangeably with accuracy; however, it more specifically refers to whether the test measures what it was intended to measure. Validity includes aspects beyond accuracy, including methodology and study design.

Validity

An ideal screening test needs to be highly sensitive to decrease the number of ____

false negatives.

An ideal confirmatory test needs to be highly specific to decrease the number of ____

false positives

Lowering a test's cutoff value will_______its sensitivity and NPV but decreases its specificity and PPV.

increase

If a patient has a positive test result and the PPV for the disease tested is 40%, what are the chances that they do not have the disease?

60% (chance of having the disease is 40%, so chance of not having the disease = 100% - 40%)

Diagnostic tests are not perfect. To calculate a new test's characteristics, you must:

=>Use the test in a patient sample that would normally require evaluation for the outcome in question =>Have everyone receive the diagnostic test as well as the gold-standard test (the best possible test for a condition, which is used as a benchmark) => Compare the results of the diagnostic test against those of the gold-standard test

When a blood sample glucose level is measured 10 times by five different glucometers, they all give the same value: 102 ± 3 mg/dL. However, a sixth glucometer gives a value of 102 ± 12 mg/dL. Compared to the first five glucometers, what is the precision and accuracy of the sixth one?

No change in accuracy, decreased precision =>The mean glucose value is the same as the other glucometers, so the result is accurate. => However, the higher standard deviation indicates more variability between the measurements, meaning that precision is lower

Lowering the cut off

B=> A Increase in FP decrease in FN Increase in sensitivity=> increase in NPV Decrease in specificity=> decrease in PPV

Increase in prevalence

increase PPV decrease NPV

low accuracy, high precision

All on the target but all over the place

Which type of test is better to rule in a disease, and which one is better to rule out?

A specific test is good to rule in a disease when its results are positive, whereas a sensitive test is good to rule out a disease when its results are negative.

High accuracy, low precision

All are close to the bullseye, but not all in the same place


संबंधित स्टडी सेट्स

life Policy Provisions & Options

View Set

Saunders: Pharmacology/Cardiovascular

View Set

Unit 8 Quiz (The Reproductive System)

View Set

CH 39 EAQ Management of Nutritional Problems

View Set

Astronomy Chapter 14 Module 14 HW4

View Set