ITM01e

Technician A says that shielding gas nozzles may have different shapes.Technician B says that the shielding gas nozzle is attached to the shielding gas cylinder.Who is right?

a only

what lift raises one vehicle off the ground, allowing another vehicle to be parked underneath it

above ground lift

What is the purpose of a wheel alignment?

allow the vehicle to travel straight

a tall machine, with a vacuum like end with a big container to catch fumes is used to do what

catch welding fumes

Which of these is used as the filler material with GMA (MIG) welding?

electrode wire

what is shown in the picture

electrode wire

All of these may be limitations for using spot welding EXCEPT: access to both sides of the panel. maximum combined thickness recommendation. electrode wire size. power requirements.

electrode wire size

To help control the thickness of the adhesive in a joint, adhesives may contain:

glass beads

All of these are stages in the adhesive bonding process EXCEPT: mix time. work time. clamp time. cure time

mix time

Three-dimensional measuring references all of these EXCEPT: radius. length. width. height.

radius

All of these are stages of the spot weld process EXCEPT: squeeze time. current-on time. hold time. release time.

release time

what process uses a rivet gun and a two part metal bonding adhesive?

rivet bonding

All of these are true about GMA (MIG) welding EXCEPT that: both the base metal and electrode are melted. shielding gas protects the weld from contamination. heat is produced using a short electric arc. the welding gun liner regulates the shielding gas.

the welding gun liner regulates the shielding gas.

Which of these is done to a tire if it is out of balance?

weights are added to rim

Two-part adhesives cure:

when mixed together