MIS 140 Chapter 8

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

Which of the following would be least effective in improving backbone performance?

adding new keyboards to the client computers

One advantage of a routed backbone is that is requires little management.

False

Routers operate at the application layer.

False

Circuit capacity on a backbone network will not be improved by

going from 100Base-T Ethernet to 10Base-T Ethernet

Circuit capacity on a backbone network will not be improved by:

going from 100Base-T Ethernet to 10Base-T Ethernet

Switches:

learn addresses by reading the source and destination addresses

Associated with a switched backbone, MDF is an acronym for

main distribution facility

Routers:

may also be called TCP/IP gateways

Devices in a rack are connected together using ___________.

patch cables

Computers can be assigned to a VLAN based on the ________.

physical port on the switch

A routed backbone tends to be used more for large networks than VLANs, although VLAN high speed switches and this new type of LAN-BN architecture are now being considered.

true

One basic component of a backbone network is the hardware device that connects other networks to the backbone

true

One basic component of a backbone network is the hardware device that connects other networks to the backbone.

true

Routers connect two or more network segments that use the same or different data link protocols, but the same network protocol

true

Routers use network layer address to forward packets between network segments

true

Routers use network layer address to forward packets between network segments.

true

Switches and routers are devices that can connect networks to the BN.

true

The distribution layer of a backbone connects LANs together.

true

VLANs provide faster performance compared to switched, collapsed or routed backbone architectures

true

The backbone architecture layer that is closest to the users is the

Access layer

The _______ is the part of the backbone that connects the LANs together

Distribution layer

VLANs prioritize traffic based on the ______.

IEEE 802.1q standard

Using ______ capabilities, network managers can connect VOIP phones directly into a VLAN switch and configure the switch to reserve sufficient network capacity so that they will always be able to send and receive voice messages

QoS

A subnetted or hierarchical backbone can also be called:

Routed backbone

_________ move packets along the backbone based on their network layer address

Routed backbones

A __________ type of BN has a star topology with a switch at its center resulting in all devices on the BN segment being part of the same IP network

Switched backbone

A __________ type of BN has a star topology with a switch at its center resulting in all devices on the BN segment being part of the same IP network.

Switched backbone

Which of the following is not true about Layer-3 switches?

They can only switch messages based on their data link layer addresses.

Which of the following is true regarding switched backbones?

They place all network devices for one part of the building physically in the same room, often in a rack of equipment

Which of the following is not true about backbone networks?

They tend to use lower speed circuits than LANs.

A _____________ type of BN is a new type of LAN/BN architecture made possible by intelligent, high speed switches that assign computers to LAN segments via software, rather than by hardware

Virtual LAN

A _____________ type of BN is a new type of LAN/BN architecture made possible by intelligent, high speed switches that assign computers to LAN segments via software, rather than by hardware.

Virtual LAN

The _________ is the part of the backbone that connects the different backbones together

core layer

The biggest drawbacks to VLANs are their_________________.

cost and management complexity

Which of the following is not a technology layer that is considered when designing backbone networks?

decentralized layer

Network demand will not be reduced by:

encouraging the use of applications such as medical imaging

A VLAN network assigns computers to LAN segments by hardware.

false

A VLAN requires the computer manager to reconfigure the physical cables to the switch if a computer is moved from one port to another port on a switch.

false

A backbone network that connects many backbone networks spanning several buildings at a single location is often called an Internet backbone

false

A hardware device that operates at the application layer is a router.

false

A switched backbone uses a bus topology.

false

Backbone networks typically use lower speed circuits to interconnect a series of LANs and provide connections to other backbone networks

false

Layer-3 switches switch messages based only on their data link layer address.

false

Routed backbones use switches that move packets based on data link layer addresses

false

Routers can only connect the same type of cable.

false

With a switched backbone network, the equipment is usually placed in a ______

rack

With a switched backbone network, the equipment is usually placed in a ______.

rack

Two primary disadvantages to the ______ BN type are that the routers in the network impose time delays, and routers are typically more expensive and require more management than switches.

routed backbone

Most backbone devices are store-and-forward devices. One simple way to improve performance is to ensure that they have ________________.

sufficient memory

Which of the following is not true about switched backbones?

there are many more networking devices in a switched backbone network compared to the number of LANs attaching to it

Device performance on a backbone network will not be improved by:

translating packets from one protocol to another as they enter the BN

A backbone network is a high-speed network that connects many networks.

true

A key advantage of a chassis switch is its flexibility.

true

A room that contains a rack of equipment for a rack-based collapsed backbone is also called the main distribution facility (MDF) or central distribution facility (CDF).

true

Switched backbone networks:

use a star topology with one device, usually a switch


संबंधित स्टडी सेट्स

Fundamentals of Investing - Ch 1

View Set

Biology Exam 3: Energy Balance and Diabetes

View Set

Special Tests of the Wrist, Hand, and Fingers

View Set

APES Unit 5: Soil and Agriculture; Minerals and Mining

View Set