MSSC Safety 4.0

Question: The most common chemical identifiers are the chemical name, the UN ID, and the __________ number.

CAS ID

Question: On a half-mask respirator, a worker should cover the cartridges with his/her hands when __________.

Checking the mask for leaks

Question: Inhalation is the most common way for a(n) __________ to enter the body.

Chemical

Question: Health hazards can cause acute (short-term) or __________ (long-term) health problems.

Chronic

Question: A hard hat classified as __________ provides electrical protection up to 2200 volts.

Class G

Question: Which of the following items marked the advent of the third industrial revolution?

Computers

Question: When transporting hazardous materials, the shipper should reference the __________ for packaging, labeling, and paperwork requirements.

Hazardous Materials Table

Question: The emergency response team should be notified immediately if you observe a(n) __________.

Hazardous material spill

Question: Which hazards are caused by materials that cause infections or slowly damage the body over time?

Health

Question: In terms of safety, everyone is responsible for reporting __________.

Improperly guarded equipment

Question: Which of the following is NOT a benefit of wearing PPE designed for your hands?

Increased hand perspiration

Question: Nanotechnologies, artificial intelligence, and robots are examples of what kind of technology?

Industry 4.0

Question: A job safety analysis is the best method of __________.

Integrating safety into the way a job is done

Question: Many products cannot be disposed of using a trash compactor before sending to a landfill. These include: fluorescent light bulbs, spray cans containing all or some of product, and __________.

Liquid dyes

Question: Which of the following are NOT financial impacts of on-the-job injuries for your employer?

Lost wages

Question: Which component of IIoT allows networked devices to exchange information?

Machine-to-machine communication

__________ is the process of converting raw materials into finished goods.

Manufacturing

Question: A __________ is used to block a machine's operation until its proper guards are in place.

Mechanical interlock

Question: Which of the following is an IIoT application?

Monitoring in-plant processes

Question: The following color code is used for which system; blue = health, red = fire, orange/yellow = reactivity, and white = information.

NPCA and NFPA

Question: If an operator knows a safety problem exists with a machine, the operator should __________.

Notify a supervisor immediately

Question: The PEL (Permissible Exposure Limit) for exposure to hazardous substances are set by __________.

OSHA

Question: The mission of OSHA, or the __________, is to ensure safe and healthful working conditions for working men and women.

Occupational Safety and Health Administration

Question: __________ are chemicals that fuel the combustion of other materials.

Oxidizers

Question: Which of the following tests can be performed to determine if the company's safety measures need improvement?

Performing routine safety inspections

Question: A mechanical interlock __________ prevent(s) a machine's operation when the guard is out of place.

Physically

Question: Which of the following is evaluated during a hazard assessment?

Potential hazards

Question: Which type of ear protection is molded to fit your unique ear?

Pre-formed earplug

Question: Which IIoT application monitors equipment during normal operation to prevent failures to the equipment?

Predictive maintenance

Question: Why should one wear close fitting clothing when working around machines?

Prevent injury caused by clothing getting caught in machinery

Question: When performing a hazard analysis, a list of hazards associated with a job is identified as well as the __________ to avoid them.

Procedures

Question: Safe handling procedures of chemicals are found in the __________.

SDS

Question: The __________ provides information about proper handling, storage, PPE, and disposal of each chemical.

SDS

Question: The __________ is responsible for promoting safety throughout the workplace, ensuring policies are followed, training is taking place, and policies are up-to-date.

Safety officer

Question: The __________ should collect and evaluate suggestions for changing or improving safety training material and content.

Safety officer

Question: Which of the following PPE could prevent a puncture wound to your foot?

Safety shoes

Question: The major responsibility of the president or general manager is to __________.

Set the vision and create a plan

Question: The __________ is used to identify the items being loaded for shipment as well as the potential hazards associated with those items.

Shipping manifest

Question: Industry 4.0 has led to the creation of what kind of facilities?

Smart factories

Question: People working together discussing issues and making decisions are key elements of a __________.

Successful work group

Question: Which manufacturing logistics application of IIoT includes the resources to move a product or service from the supplier to the customer?

Supply chain management

Question: The __________ of a high performance team has equal decision making authority with other team members.

Team leader

Question: The QA department ensures that the products meet requirements as defined by whom?

The customers

Question: When assessing hazards, which of the following safety aspects are considered by an employer setting Hazmat policies?

The effectiveness of training workers

Question: Before removing a machine's guards, make sure that __________.

The machine has been locked and tagged out

Question: The person who performs a step in a production process is the internal customer to the person who performs __________.

The previous step in the process

Question: A worker should not unload a truck if __________.

They do not understand a placard on the truck

Question: If an operator does not test equipment after it is locked out, __________.

They should be retrained

Question: Employers should provide training in the use of personal protective equipment __________.

To reduce the employee's risk of hazardous material exposure

Question: Until corrective action is taken, safety concerns should be __________.

Tracked and reported

Question: In manufacturing, changes to processes, equipment and people are the largest drivers of __________.

Training

Question: An injury is defined as physical harm to the body that happens as a result of exposure to some form of energy that exceeds the body's tolerance. Is this statement TRUE or FALSE?

True

Question: Eye and face protection must protect you from the specific hazards that you may encounter in your workplace. Is this statement TRUE or FALSE?

True

Question: PPE can protect you from injuries caused by equipment or dangerous chemicals. Is this statement TRUE or FALSE?

True

Question: Smoke inhalation can cause serious lung tissue damage. Is this statement TRUE or FALSE?

True

Question: The purpose of PPE is to protect you from injury by creating a barrier against workplace hazards. Is this statement TRUE or FALSE?

True

Question: The regulation that requires manufacturers to document and report information on the types of chemicals they use, store, release into the environment, or dispose of is known as EPCRA. Is this statement TRUE or FALSE?

True

Question: Hazardous materials being shipped internationally are given what identification code for labelling?

UN (United Nations)

Question: The National Safety Council defines an accident as an occurrence in a sequence of events that produces __________.

Unintended injury, ill health, or property damage

Question: What rule should be followed to safely store hazardous chemicals?

Use original storage containers. Store material based on compatibility. Identify storage areas with signs.

Question: Safety glasses should be worn when __________.

Using a drill press

Question: Gloves and safety glasses are necessary when working with __________.

With sharp or rough sheet metal

Question: Which of the following best describes OSHA's Hazardous Communication Standard?

Workers have a right to know the risks of hazardous materials they work with.

Question: What type of injury is caused by looking directly at a welding arc?

Arc flash

Question: What would an HMIS label use to indicate chemicals that pose chronic health risks?

Asterisk

Question: Diluted __________ can be used to neutralize most blood pathogens.

Bleach

Question: Which classification of hardhat is designed for use in areas of low clearance and provides minimal impact resistance or protection from electrical hazards?

Bump Caps

Question: Working in an atmosphere with less than __________ can cause disorientation.

19.5% oxygen

Question: What kind of technology mostly requires the use of a mobile phone?

5G communication

Question: Which of the following refresher training courses is required annually?

8-hour HAZMAT

Question: A group of employees and managers who work together to maintain a safe work environment is known as which of the following?

A safety committee

Question: Safety glasses with side shields should be worn with __________ for additional eye protection.

A welding helmet

Question: What laboratory is responsible for testing the quality and durability of industrial glove PPE?

ASTM

Question: How should a new employee's participation in a safety orientation be documented?

According to company policy

Question: How should inspection records be stored?

According to federal, state, local, and company regulations

A system that combines advanced technologies to make customized products for less money and high quality is called __________ manufacturing.

Advanced

Question: EPA regulations are designed to protect you from which of the following hazards?

Airborne and waterborne contaminants

Question: Which of the following statements about Safety Data Sheets are true?

All chemicals stored in inventory must have an SDS.

Question: Safety should be the number one priority at all times for __________.

All employees

Question: The __________ provides guidelines for disposal of chemicals without dumping or discarding.

EPA

Question: The Environmental Protection Agency (EPA) requires documentation of inspections for __________.

Emissions released in the air

Question: Which industry sector uses IIoT to remotely control energy-consuming devices?

Energy and power

Question: Data results are required to be made available to employees who participate in __________.

Environmental tests

Question: What standard introduced in the early 1980s established a method to physically connect machines from different manufacturers enabling them to communicate to one another?

Ethernet

A consensus is a decision-making process whereby the team members all accept the same decision __________.

Even though it may not be their first choice

Question: Standard operating procedures (SOPs) are detailed documents that __________.

Explain each step in a work process

Question: OSHA provides regulations to limit the __________.

Exposure to noise

Question: Practicing unsafe behavior does not impact anyone besides you. Is this statement TRUE or FALSE?

False

Question: Which of the following PPE items use synthetic material?

Firefighter's suit Chemical gloves Sanitation aprons

Question: __________ is a system that rotates chemical stock to ensure they are used within their shelf life.

First in, first out

Question: A red and white DOT placard indicates the material is a(n) __________.

Flammable solid

Which of the following is a segment of manufacturing?

Food and beverage Industrial Process

Question: What protection does a metatarsal guard provide?

Foot protection

Question: The three Fs of product design are form, fit and __________.

Function

Question: Which of the following PPE are you required to wear when working around flying debris like sparks or wood chips?

Goggles and face shield

Question: A machine __________ is a device that is designed to keep the operator clear of dangerous machine parts.

Guard

Question: A worker should immediately lockout a machine if he or she finds the __________.

Guard has been bypassed

Question: What type of respirator covers only the nose and mouth?

Half-mask respirator

Question: OSHA requires that a copy of the __________ be readily available to all employees.

Hazard Communication Program and SDS sheets

Question: The process of identifying potential hazards in the workplace is known as a __________.

Hazard assessment