OSHA All questions and answers

The confined space entry team includes which of the following

A and C only

Which of the following is a benefit for having a safety and health program

A company may need to bid on a contract that requires safety and health documentation

Many factors play a role in ergonomics which of the following is most correct

A,B, and C

The primary cause of musculoskeletal disorders and other ergonomic related injuries and illness include

A,B, and D

Moving all flammables in combustibles away from the welding area is ______

An example of effective fire prevention

40. A colorless and tasteless gas that cannot be readily detected by the senses

Carbon monoxide

When are you person is injured wing crash between two or more objects the incident is recorded as this type

Caught in or between

40. Vapors of these solvents are a concern and welding and cutting because the heat and ultraviolet radiation from the arc will decompose the vapors inform highly toxic and irritating phosgene gas

Chlorinated Hydrocarbons

Most back disorders caused by _______

Chronic exposure or long term injury

Body movement where "energy is exerted to cause movement"

Force

Type B soil afford how many options of protection?

Four

Employees should work with their _________ To develop a disciplinary program

Human___________

Each year how many confined space deaths and injuries occur

Hundreds

Before work begins the competent person

Identifies all confined spaces where employees may work

The three general phases of A JHA are 1) Identify the job steps 2) identify the hazard for each step and 3) _______

Identify _______

What is JHA used for

Identifying ______

22-24 Which of the following is not an evacuation myth?

If the trench is deeper than 5 feet you must shore or protect the evacuation

In accounting of safety and health responsibilities should be

Included in performance reviews

A program that recognizes an employee for safe work practices

Is a good ___________ With sa_________

What does JHA stand for

Job hazard analysis

Electrical, pneumatic, hydraulic, or mechanical energy hazards may require

LOTO/COHE hazard control procedures

Controls for a confined space physical hazards may include blanking, double block and bleed and __________

Lookout and tagout

A fall hazard is anything that could cause you to _________ which may result in a fall

Lose balance or bodily support

For confined spaces operations, offsite emergency rescue services

May be used if qualified and trained

A safety incentive program

Might _______

40. Cylinders may be used as rollers or support when

Never

Even if an employee is not a part of 8CSE team the employee may enter a confined space on some occasions when

Never

When may the attendant enter a confined space

None of the above

Arc welding cables in need of repair must

Not be used and officially repaired by a qualified person or effectively disposed of

40. Arc welding cables in need of repair must _________

Not be used in affectively repaired by a qualified person or effectively disposed of

The key distinction between supplied air in air purifying respirator is

One supplies your oxygen, the other filters out contaminants

The attendant may leave the opening of the confined space

Only when relieved by another attendant

Guidelines for safety and health program development is available through __________

Osha consultation

40. PEL is an acronym for which of the following

Permissible exposure limit

A safety and health program should be

Personalized and tailored to the specific job hazard at a workplace

According to OSHA standards and support AA,1926.1204, when must a written permit space program be made available to employees of their representatives

Prior to operations

40. Whenever practice above all our welding and cutting operations must be shielded by non-combustible or flameproof screen which will

Protect workers from the direct rays of the arc

Whenever practicable , all arc welding and cutting operations might be shielded by non-combustible or flameproof screen which will __________

Protect workers from the direct rays of the arc

The _________. GFCI fit into the standard electrical outlet box to protect against ground faults

Receptacle

In a confined space hot work may be performed but _________

Requires a special permit

40. Fumes and gases enter the body through the __________ and effect the lungs directly or transported by blood in the lymph system to other parts of the body

Respiratory system

Of the following who would be the best choice to write your organization of safety and health program

Safety and health subject matter expert

And employer must ensure the following for entry into a permit space

Save methods for entering and exiting the space

What is required with a confined space job is completed

Secure space, cover plates and doors

Which of the following is the specific element included in a confined space permit

Testing requirements

Employer approved rescue services must be informed of Hazzard in advance by

The employer

Evacuations involving vapors require confined spaces because both have ________

The potential to contain hazardous atmosphere

Retractable lanyards are the often the first choice for a fall protection lanyard why

They limit far distance is 2 feet or less by their falling sensing design

Confined space rescue equipment includes

Tripod with hand winch or hoist in full body harness with lifeline

Additional training is required whenever there is evidence that permit space entry procedures have changed

True

Each person serving as an attendant must be listed on the confined space permit

True

40. In arc welding the arc which produces the heat to melt metal produces intense light. This light can be a combination of three forms of non-ionizing radiation known as?

Ultraviolet Light, Infrared light, vidible light

If self-evaluation of an entrance is not possible to attendant should

Use an extraction device

40. In the art welding process, I exposure to intense visible light is prevented for the most part by the_________

Welder's Helmet

When should a formal hazard assessment or inspection be performed

When a new hazard is uncovered

Which of the following is a quart element of a safety and health program as recommended by OSHA

Worker participation

Which of the following is critical to The success of a safety and health program

Worker participation in the program development

22-24 what is the minimum distance allowed between a spoil pile in trench's edge

2 feet

40. Oxygen cylinders in storage must be separated from field gas cylinders or combustible materials (Especially oil or grease), A minimum distance of _________or by a non-combustible barrier at least 5 feet high having a fire resistance rating of at least 1/2 hours

20 feet

Oxygen cylinders in storage must be separated from fuel gas cylinders or combustible material (especially oil or grease) A minimum distance of __________ or by a non-combustible barrier at least 5 feet high having a fire resistance rating of at least 1/2 hour

20 feet

40. It is recommended that a firewatch be employed to keep an eye on the area of building for at least _________after welding to check for results in fires or smoldering materials

30 minutes

It is recommended that a firewatch be employed to keep an eye on the area of welding for at least __________ after welding to check for resulting fires or smoldering materials

30 minutes

In type C soil, the angle of repose is very long; how many degrees must the angel be

34 degrees

40. One of the fundamental general safety guidelines with respect to hot work is to keep the work area clear of combustibles for at least ____________ from the hot work area

35 feet

According to OSHA a fall hazard exists whenever workers who load and unload trucks must climb onto trailers, materials, or equipment in their feet or above _________ from the lower level or ground

6 feet

Oh she's not recommend that affect your safety and health programs include _________major elements

7

A permit does each of the following except

Absolutely guarantee entrant safety

Why are confined spaces accidents rarely preventable

Actually confined spaces and accidents are mostly preventable

Breaking up the work schedule to minimize reproduce task, which involves doing different things with different muscles and an example of what type of control

Administrative control

Managers are considered __________ within an organization when it comes to safety and health

Agents of change

A company safety and health program should cover

All _______

Secondary causes of MSD's include environmental factors. These environmental factors include?

All except answer A

40. Arc welding doesn't include which of the following

All of the above

40. Dues and don'ts of gas welding and cutting include which of the following

All of the above

40. It is important before building in hot work to remove coating along the lines of the world such as _________ to prevent the release of toxins

All of the above

40. Symptoms of lead poisoning include which of the following

All of the above

40. What kind of testing is required before entry into a confined space

All of the above

40. in addition to fumes welding produces A number of gasses to include Which of the following?

All of the above

40.An important feature of a hot work permit include which of the following

All of the above

40.You must never weld, cut or perform hot work when

All of the above

42. Confined spaces are dangerous because

All of the above

A flexible extension cord may be damaged by

All of the above

Arc welding doesn't include which of the following

All of the above

Aside from chemicals, oxygen, and entrapment hazards, confined spaces may be hazardous due to

All of the above

Back disorders are frequently caused by the cumulative effects of faulty body mechanics such as which of the following

All of the above

Changing conditions in a permit required confined space may require

All of the above

Confined spaces are dangerous because

All of the above

In construction the most common rating for ladders include

All of the above

It's true about retractable lanyards

All of the above

Management duties include which of the following

All of the above

Overhead powerlines carry extremely high voltage which of the following is also true about overhead powerlines

All of the above

The attendant

All of the above

Training topics for employees who are exposed to fall hazard should include

All of the above

Which of the following is allowed for accessing a scaffold

All of the above

You must never will, cut or perform hot work when

All of the above

ergonomic related disorders principally include which of the following

All of the above

Workers who must do which of the following are at greatest risk from experiencing work related musculoskeletal disorders

All the above

Which of the following is a requiredment prior to entry into a permit space

All three A,B,and C

Shaded lenses used in welders helmet and goggles must meet the test for transmission of radiant energy prescribed in _________

American national standards institute (ANSI) Z87.1

The confined space permit is

An authorization and a checklist that is to identify hazards and precautions

40. The most common in simplest type of welding today is

Arc welding

Each member of the confined space emergency rescue team was practicing emergency skills

At least annually

Which of the following is required before entering a confined space

Atmospheric testing

The CSE Supervisor must

Authorized and signed the entry permit

Which of the following is a duty of the CSE supervisor

B and C

Go for a regulation is remove from a cylinder valve the cylinder valve must always ________\

Be closed and the gas release from the regulator

40. Before a regulator is removed from a cylinder valve, the cylinder valve must always __________

Be closed in the gas released from the regulator

a Safety and health program should

Be formally documented

Testing for the presence of oxygen is important for any confined space. The concentration of oxygen in a confined space should be

Between 19.5% and 23.5%, ideally 21%

40. Controlling exposures Do the safety and health hazard encountered in welding operations including engineering controls(e.g. ventilation), _____________ and ___________

Both A and B

40. The type of world used in normally determined by ________

Both A and B

For occupancy of a confined space when most hazard evaluation test be conducted

Both A and B

This illness/injury occurs when the blood vessels of the hand are damaged as a result of repeated exposure to vibration for long periods of time

Both A and B

Which of the following is considered a confined space hazard

Both A and B

Emergency rescue personnel for confined spaces may

Both A and B above

40. An investigative tool used to characterize the nature and extent of contaminants in air into determine whether contaminants source of fake a workers air quality

Both B and C

Musculoskeletal injuries can _____

Both B and D

Which of the following is an electrical hazard

Both B and D

Hey how's it is defined as a situation or condition that has the potential to cause harm to

Both a and b

What do you inert gases are often used to provide flammable or explosive vapors from a confined space

Carbon dioxide or nitrogen

Bleeding, ventilation, and flushing are all examples of

Confined space hazards controls

Which of the following is an executive management role with regards to an organization safety and health program

Creating a safety mission or policy statement

Which of the following is important with regard to a labor/management safety and health committee

Documented guidance on how employees safety suggestions are evaluated

Your gas and oxygen hoses must be

Easily distinctive

40. Fuel gas and oxygen hose must be

Easily distinguishable from each other

40. Hot electrode holders must not be dipped in water by the world or Qatar because doing so me expose the worker to

Electric shock

Hot electrode holders must not be dipped in water by the welder or cutter because doing so may expose the worker to___________

Electric shock

These tight controls include designing working stations, tools, equipment to minimize repetition, forces and posture problems

Engineering control

Even though the employer is responsible for providing confined space training, the cost of the training is paid by the employee

False

PPE should be considered for use before using engineer ring or work practice controls

False

Good Ergonomics attempts to

Fit or adapt the job to the worker

To safely use air monitoring Equipment in a confined space, and operator must ______

Follow the manufacturers instructions

40. When is structure or pipeline is employed as a ground return circuit, it must be determined that ____________

lThe required electrical contact exists at all joints