PHYS220 - Chapter 5

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

A cable is 100 m long, has a cross-sectional area of 1.0 mm2, and is made of a material having a Young's modulus of 1.0 × 1011 N/m2. If a 1000-N force is applied to stretch the cable, how far does it stretch?

1 m.

A 0.600-mm diameter wire stretches 0.500% of its length when it is stretched with a tension of 20.0 N. What is the Young's modulus of this wire?

1.41 × 10^10 N/m^2

Two blocks are connected by a string that goes over an ideal pulley as shown in the figure. Block A has a mass of 3.00 kg and can slide over a rough plane inclined 30.0° to the horizontal. The coefficient of kinetic friction between block A and the plane is 0.400. Block B has a mass of 2.77 kg. What is the acceleration of the blocks?

0.392 m/s^2

A 615 N student standing on a scale in an elevator notices that the scale reads 645 N. From this information, the student knows that the elevator must be moving

You cannot tell if it is moving upward or downward.

A 60.0-kg person rides in elevator while standing on a scale. The elevator is traveling downward but slowing down at a rate of 2.00 m/s2. The reading on the scale is closest to

708 N.

The Young's modulus is the ratio of ................... within the elastic limit of the materials.

stress to strain

The Bulk's modulus is the ratio of ................. within the elastic limit of the materials.

stress to volume strain

Tensile stress is

the applied force per cross-sectional area.

When a parachutist jumps from an airplane, he eventually reaches a constant speed, called the terminal speed. Once he has reached terminal speed

the force of air drag on him is equal to his weight.

Tensile strain is

the ratio of the change in length to the original length.

A solid steel sphere with a radius of 2.0 m falls off a ship and sinks to a depth where the pressure is 15 MN/m^2. The bulk modulus for this steel is 1.6 × 10^11 N/m^2. What is the change in the radius of the sphere?

-0.062 mm

A 5.0-m long, 12-kg uniform ladder rests against a smooth vertical wall with the bottom of the ladder 3.0 m from the wall. The coefficient of static friction between the floor and the ladder is 0.28. What distance, measured along the ladder from the bottom, can a 60-kg person climb before the ladder starts to slip?

1.7 m

A 30.0-kg child sits on one end of a long uniform beam having a mass of 20.0 kg, and a 40.0-kg child sits on the other end. The beam balances when a fulcrum is placed below the beam a distance 1.10 m from the 30.0-kg child. How long is the beam?

1.98 m

A sample of tendon 3.00 cm long and 4.00 mm in diameter is found to break under a minimum force of 128 N. If instead the sample had been 1.50 cm long and of uniform composition and cross-sectional area, what minimum force would have been required to break it?

128 N

The tensile strength (the maximum tensile stress it can support without breaking) for a certain steel wire is 3000 MN/m2. What is the maximum load that can be applied to a wire with a diameter of 3.0 mm made of this steel without breaking the wire?

21 kN

A 60.0-kg person rides in an elevator while standing on a scale. The scale reads 400 N. The acceleration of the elevator is closest to

3.13 m/s^2

A 60.0-kg person rides in an elevator while standing on a scale. The scale reads 400 N. The acceleration of the elevator is closest to

3.13 m/s^2 downward.

A wooden block A of mass 4.0 kg slides on a frictionless table when pulled using a massless string and pulley array by a hanging box B of mass 5.0 kg, as shown in the figure. What is the acceleration of block A as it slides on the frictionless table? Hint: Think carefully about the acceleration constraint.

4.1 m/s^2

A system comprising blocks, a light frictionless pulley, a frictionless incline, and connecting ropes is shown in the figure. The 9.0-kg block accelerates downward when the system is released from rest. The tension in the rope connecting the 6.0-kg block and the 4.0-kg block is closest to

42 N.

A 150-N box is being pulled horizontally in a wagon accelerating uniformly at 3.00 m/s2. The box does not move relative to the wagon, the coefficient of static friction between the box and the wagon's surface is 0.600, and the coefficient of kinetic friction is 0.400. The friction force on this box is closest to

45.9 N.

The figure shows a 100-kg block being released from rest from a height of 1.0 m. It then takes it 0.90 s to reach the floor. What is the mass m of the other block? The pulley has no appreciable mass or friction.

60 kg

A dump truck has a large cubical concrete block in its bed. The coefficients of friction between this block and the floor of the bed are µk = 0.450 and µs = 0.650. As the bed is slowly tilted above the horizontal, will the brick first begin to slide or will it first tip over?

It will first begin to slide.

Two objects having masses m1 and m2 are connected to each other as shown in the figure and are released from rest. There is no friction on the table surface or in the pulley. The masses of the pulley and the string connecting the objects are completely negligible. What must be true about the tension T in the string just after the objects are released?

T < m2g

Two objects have masses m and 5m, respectively. They both are placed side by side on a frictionless inclined plane and allowed to slide down from rest.

The two objects reach the bottom of the incline at the same time.

Two bodies P and Q on a smooth horizontal surface are connected by a light cord. The mass of P is greater than that of Q. A horizontal force (of magnitude F) is applied to Q as shown in the figure, accelerating the bodies to the right. The magnitude of the force exerted by the connecting cord on body P will be

less than F but not zero.


संबंधित स्टडी सेट्स

Chapter 15: Anti-discrimination Laws and Other Marketing Regulations (Colibri Real Estate)

View Set

LAB FINAL Chapter 15 General and Special Senses

View Set

Chapter 4 - American Political Culture

View Set

Module 8: EAQ Hormonal Regulation

View Set