Telecom quiz (5)
False
Connectionless routing sets up a TCP connection, or virtual circuit between a sender and receiver.
True
Domain Name Servers provide the resolution of application layer addresses to their corresponding network layer address.
can solve many updating headaches for network managers who have large, growing, changing networks
Dynamic addressing:
Correct Internet Group Management Protocol
IGMP refers to:
Multicasting
IP addresses from 224 to 239 belong to Class D and are reserved for
is utilized during routing functions
IP:
4.3 billion
IPv4 provides ___________ IP addresses.
4
IPv4 uses ________ bytes per Internet address.
16
IPv6 is based upon _________ -byte addresses.
The transmission of status information "wastes" network capacity that could be used to send user messages.
One drawback to dynamic routing is:
True
Part of the function of address resolution is translating the application layer address of the destination into a network layer address.
True
Routing is the process of determining the path or route through the network that a particular message will follow from the sender to the recipient.
Domain Name Service
Server name resolution is done using the:
True
Source port address is the logical address used to identify the application that is sending the data.
half duplex
Stop-and-wait ARQ uses ___________ type of data flow.
True
Subnet masks tell computers what part of an IP address is to be used to determine whether a destination is in the same subnet or in a different subnet.
True
TCP includes a sequence number so that the packets can be reassembled at the destination in the correct order.
sequence numbers
TCP uses _____________ so that the destination station can reassemble the packets into the correct order.
False
TCP/IP is a data link protocol that is used on the Internet.
False
TCP/IP operates only as connection-oriented.
True
The TCP portion of TCP/IP performs linking to the application layer.
127
The _____ address range is reserved for a computer to communicate with itself and is called the loopback.
ACL
The ______ defines what type of packets should be routed and what types of packets should be discarded.
True
The ______ defines what type of packets should be routed and what types of packets should be discarded.
routing table
The _____________ is used by a computer to determine how messages will travel through the network.
False
The latest version of IP is IPv7, which increases the address space from 128 bits to 256 bits.
True
The most common protocol for dynamic addressing in TCP/IP networks is the Dynamic Host Configuration Protocol.
multicast message
The most common protocol for dynamic addressing in TCP/IP networks is the Dynamic Host Configuration Protocol.
False
The network layer address for IP is ten bytes long when using IPv4.
False
The network layer sits directly between the application layer and the data link layer in the Internet five-layer network model.
192-bit
The older version of IP has a ________ header of control information.
Internet Control Message Protocol
The ping command uses the most basic interior routing protocol on the Internet, which is the:
False
The source port identifier in the TCP header tells the TCP software on the destination computer, which application on the destination it should pass the packet to.
False
The standard port number for Telnet is 53.
centralized, static routing, and dynamic routing
The three fundamental approaches to routing are:
segments
The transport layer must break messages from the application layer into several _____ that can be sent to the network layer.
True
The transport layer process running on the destination computer, reassembles the fragmented application message before passing it up to the application layer
False
The transport layer routes messages through the network selecting the best path from the source to the destination station
False
There are four fundamental approaches to routing: centralized, static routing, dynamic routing, and monitor routing.
True
Translating an application layer address to a network layer address and finally to a data link layer address is called address resolution.
connection-oriented
A TCP three-way handshake is used to establish a ___________ messaging method.
hardware manufacturer
A client computer is typically assigned a data link layer address by a:
True
A hop in a routing calculation is defined as one link or circuit.
Cisco Internetwork Operating System
A majority of routers use the following operating system:
Cisco Internetwork Operating System (IOS)
A majority of routers use the following operating system:
False
A routing protocol used inside an autonomous system is called an exterior routing protocol.
broadcast message
A special type of message that is used when sending the same message to all computers on a specific LAN or subnet is called a:
255.255.0.0
A subnet mask of ___________ means that all computers with only the same first two bytes in their IPv4 addresses are on the same subnet.
unicast message
A type of message that is used when sending a message from one computer to another computer is called a:
192-bit
A typical TCP segment has a _______ header of control information.
subnet
A(n) ________ refers to a group of computers that are logically grouped together by IP number.
True
An Address Resolution Protocol message is broadcast to all computers in a subnet to find the data link layer address of a host whose IP address is known but whose MAC address is unknown.
routing decisions are simple
An advantage of centralized routing is:
www.cba.uga.edu
An application layer address using TCP/IPv4 looks like:
Stop-and-wait and continuous
What are the two types of ARQ?
broadcast message
When TCP/IP translates a network layer address into a data link layer address, it sends a special ____________ to all computers in the subnet.
False
When using dynamic routing, routing decisions are always made by a central host or server.
keyboard
Which of the following is not a component of a router?
UDP
Which of the following is not a protocol used at the application layer.
classes of service
With QoS routing different __________ are defined, each with different priorities.
Distance Vector
With ________ routing, computers or routers count the number of hops along a route and periodically exchange information on the hop count with their neighbors.
TCP/IP
_______ is the dominant network protocol today and is in use in virtually every LAN and WAN in the world.
routing
__________ is not an important function of the transport layer.
Routing
___________ is the process of determining the path that a message will travel from sending computer to receiving computer.
Server Name Resolution
___________ is the translation of application layer addresses into IP addresses.
Link state
_______________ is a type of dynamic routing.
ARIN
_________created a service that allows organizations to transfer IPv4 addresses they don't need to another organization.