117 Chap 4

You have recently added a new USB portable hard disk to your computer. You have received a notice that new hardware has been detected but the disk does not appear as a storage location. Which utility would you use to verify that the hard disk's logical disk information is recognized by Windows 10 (Choose all that apply)? - Device Manager - USB Management console - DiskPart - Disk Management console - none of the above

- DiskPart - Disk Management console See: Ch. 4: Managing Disks and File Systems, Section - Disk Management Tools

A user is given Read permission to a file stored on an NTFS-formatted volume. The file is then moved to a folder on the same NTFS-formatted volume where the user has been given Modify permission to that folder. When the user signs in to the computer holding the file and accesses its new location via a drive letter, what is the user's effective permission to the file? - Full control - No access - Read - Modify - None of the above

- Full control See: Ch. 4: Managing Disks and File Systems, Section - Effective Permissions

Windows 10 supports locally encrypted files stored on which of the following types of partitions (Choose all that apply)? - ReFS - NTFS - FAT - FAT32

- NTFS - FAT32 See: Ch. 4: Managing Disks and File Systems, Section - File Systems

What is the number of physical disks required to implement three-way resilience for a Storage Spaces volume? - 3 - 7 - 1 - 2 - 5

5 See: Ch. 4: Managing Disks and File Systems, Section - Configuring Storage Spaces Fault Tolerance

Think Critically 4-1: Selecting a File System and Security Settings You decide to share the annual report for your company from your computer. You decide that the data will be stored in its own partition, so you create a 20 MB logical partition for the report. If a user signs in to your computer locally, that user must have read-only access to the files. What file system would you select for the partition? What security settings would you use to achieve the desired results?

Because the data will be stored in its own 20 MB logical partition, it's very small. Using NTFS would allow for security features to be used, but it would take up a lot of space for the NTFS file system alone. I would use NFTS. With regular "Fat", it might be simple and a basic method to organize files on partitions that are no larger than 4 gb in size, but it does not provide file system security. The security settings would be set to read-only.

You have just plugged a USB portable hard drive into an older laptop and the disk has not appeared as available. You are concerned that the hard disk controller hardware has not been recognized by the computer. What utility would you use to verify that the controller is functioning correctly? USB Management console Device Manager Disk Management console DiskPart none of the above

Device Manager See: Ch. 4: Managing Disks and File Systems, Section - Scanning for New Hardware Changes

A file is currently compressed in its local file system. For security reasons, the file is required to be encrypted. The file can be both compressed and encrypted. True or False?

False See: Ch. 4: Managing Disks and File Systems, Section - Attribute Flags

A user is given Read permission to a file stored on an NTFS-formatted volume. The file is then moved to a different folder on a different NTFS-formatted volume where the user has been given Full control permission to that folder. When the user signs in to the computer holding the file and accesses its new location via a drive letter, what is the user's effective permission to the file? - No access - Full control - Modify - Read - None of the above

Full control See: Ch. 4: Managing Disks and File Systems, Section - Effective Permissions

A 127 GB volume on a dynamic disk can be formatted with which file system? - FAT32 - NTFS - FAT - ReFS

NTFS See: Ch. 4: Managing Disks and File Systems, Section - New Technology File System

Which of the following file systems is the only one that supports file compression in Windows 10? - FAT32 - FAT - NTFS - ReFS

NTFS See: Ch. 4: Managing Disks and File Systems, Section - New Technology File System

A user is given Read permission to a file stored on an NTFS-formatted volume. The file is then moved to a different folder on a different NTFS-formatted volume where the user has been given Modify permission for that folder. The file is then moved to a folder on a FAT32-formatted volume. When the user signs in to the computer holding the file and accesses it via a drive letter, what is the user's effective permission to the file? - Full control - No permissions apply - Modify - Read - Change

No permissions apply See: Ch. 4: Managing Disks and File Systems, Section - Permission Changes when Content is Copied or Moved

A drive is attached to a custom hardware RAID controller. It does not show up as being available for use with Storage Spaces. To make the drive appear for use with Storage Spaces, what must the hardware RAID controller be? - Configured as mirrored RAID 1 - Configured as parity RAID 5 - Removed - UEFI managed - BIOS managed

Removed See: Ch. 4: Managing Disks and File Systems, Section - Storage Spaces

Which of the following is the preferred technology to set up disk storage with mirrored fault tolerance for a user's backup data? - Basic disks - Hardware-based RAID 5 - Storage Spaces - Hardware-based RAID 1 - Dynamic disks

Storage Spaces See: Ch. 4: Managing Disks and File Systems, Section - Configuring Storage Spaces Fault Tolerance

When assigning NTFS permissions, an ACE entry can explicitly define who is denied access to a resource. True or False?

True See: Ch. 4: Managing Disks and File Systems, Section - Effective Permissions

What type of startup firmware best supports Windows 10 with regard to device operation and management? - BIOS - MBR - UEFI - GPT

UEFI See: Ch. 4: Managing Disks and File Systems, Section - GUID Partition Table (GPT)

Think Critically 4-3: Designing Storage Spaces You have created a new storage space using a single 500 GB external USB 3.0 drive. The drive is becoming full, so you add another external 1 TB USB 2.0 drive to the storage pool. Now that you have two drives, you would like to create a volume with storage space resiliency set to two-way mirror. You create the new volume with two-way resiliency and a size limit of 1 TB. As you are copying files from the C: drive to this new volume, you receive a warning that you are running out of space. Only a few hundred megabytes have been copied; why might you be receiving the warning so quickly? What can you do about it?

You might be receiving the warning so quickly because since the storage space resiliency is set to two-way mirror. With two-way mirror, Windows 10 is force to keep two copies of its data on two different physical disks.

A user checks the free space in a folder, Y:\BusReports, and notices that 3 GB of disk space is reported as available. When the user checks free space in Y:\BusReports\Archive, he notices that 5 GB of disk space is reported as available. The difference in available disk space is probably because the folder Y:\BusReports\Archive is in which of the following states? - archived - a mount point - encrypted - compressed - dynamic

a mount point See: Ch. 4: Managing Disks and File Systems, Section - Volume Mount Points

A user is assigned Read permission to the NTFS folder C:\ACCOUNTING. The user requires full access to the folder C:\ACCOUNTING\FORMS and its contents. This can be accomplished by which of the following? - blocking permission inheritance at C:\ACCOUNTING and assigning the user Full control to C:\ACCOUNTING\FORMS - not possible - assigning the user Full control to C:\ACCOUNTING - assigning the user Full control to C:\ACCOUNTING\FORMS - blocking permission inheritance at C:\ACCOUNTING\FORMS and assigning the user Full control to C:\ACCOUNTING\FORMS

assigning the user Full control to C:\ACCOUNTING\FORMS See: Ch. 4: Managing Disks and File Systems, Section - Effective Permissions

A NTFS partition has disk quotas enabled. You would like to run a weekly report that summarizes how much space each user is consuming. Which of the following utilities allows you to review quota details from the command line? - get-diskquota - dsquota - fsutil - diskpart - convert

fsutil See: Ch. 4: Managing Disks and File Systems, Section - New Technology File System

A VHD has been created using the Disk Management utility. Before the newly created VHD can be used to store files what must it be? - Set to MBR partition style - configured as a dynamic disk - detached - initialized - set to GPT partition style

initialized See: Ch. 4: Managing Disks and File Systems, Section - Creating VHDs

Which of the following acts as a logical container grouping multiple physical disks? - storage space - RAID controller - UEFI - BIOS

storage space See: Ch. 4: Managing Disks and File Systems, Section - Storage Spaces

Upon opening the Disk Management console, you notice a disk whose status is reported as Foreign Disk. This is most likely because of which obstacle? - the disk was moved from another computer - the disk has been corrupted - the disk's Unicode property is enabled - the disk is shared on the network

the disk was moved from another computer See: Ch. 4: Managing Disks and File Systems, Section - Installing or Moving Disks