70-740 ExamRef-16 TB, 70-740 ExamRef-17 TB, 70-740 ExamRef-18 TB, 70-740 ExamRef-19 TB, 70-740 ExamRef-20 TB

4. Which Windows Server 2016 edition is required to enable Storage Spaces Direct? A. Datacenter B. Standard C. Enterprise D. Essentials

A. Datacenter Windows Server 2016 Datacenter Edition is required to enable Storage Spaces Direct.

7. Which PowerShell command do you run to enable Storage Spaces Direct in Windows Server 2016? A. Enable-ClusterStorageSpacesDirect B. Enable-StorageSpacesDirect C. Install-StorageSpacesDirect D. Install-S2D

A. Enable-ClusterStorageSpacesDirect Run the Enable-ClusterStorageSpacesDirect PowerShell command to enable Storage Spaces Direct in Windows Server 2016.

4. What is a desirable value for the Physical Disk - % Idle Time Performance Monitor value for general server health? A. Greater than 20% B. Greater than 15% C. Less than 25 ms D. Less than 2

A. Greater than 20% Greater than 20% is a desirable value for the Physical Disk - % Idle Time Performance Monitor value for general server health.

6. You configure WSUS client behavior through: A. Group Policy B. System Policy C. Desired State Configuration D. Failover Clustering

A. Group Policy You use Group Policy to configure Windows Server Update Services (WSUS) client behavior.

5. What is the scenario called when the Hyper-V cluster and its storage reside on the same appliance? A. Hyper-converged B. Disaggregated C. Scale-in cluster D. Combined

A. Hyper-converged "Hyper-converged" is the name of the scenario in which Hyper-V cluster and its storage reside on the same server hardware.

4. Which NLB affinity setting specifies that all traffic originating from the same Class C address block is sent to the same host? A. Network B. All C. Single D. None

A. Network The Network Network Load Balancing (NLB) affinity setting specifies that all traffic originating from the same Class C address block is sent to the same host.

7. After you install the NLB feature on a Windows Server 2016 host, what management tool is available from Server Manager? A. Network Load Balancing Manager B. Application Balancing Manager C. Storage Manager D. Cluster Manager

A. Network Load Balancing Manager After you install the NLB feature on a Windows Server 2016 host, the Network Load Balancing Manager management tool is available from Server Manager.

1. The fundamental difference between Quick Migration and Live Migration is that ______ copies the VM's memory first to disk, and then from disk to the destination. A. Quick Migration B. Live Migration C. Shared-Nothing Migration D. Classic Migration

A. Quick Migration The fundamental difference between Quick Migration and Live Migration is that Quick Migration copies the VM's memory first to disk, and then from disk to the destination.

9. A prerequisite for S2D is that no existing storage have __________ enabled. A. RAID B. NFS C. SMB D. SSD

A. RAID A prerequisite for S2D is that no existing storage have RAID configuration enabled.

9. Which of the following is not a valid backup destination in Windows Server 2016? A. Tape drive B. Internal HD C. Network share D. Writable DVD drive

A. Tape drive You can back up data to an internal hard drive, external hard drive, a network share, or a writeable DVD drive. Windows Server no longer supports tape drives.

4. What is signified by a return value of 1 when you run the PowerShell command (Get-Cluster).DrainOnShutdown? A. The Drain on Shutdown feature is enabled. B. The Drain on Shutdown feature is disabled. C. The Drain on Shutdown feature is managed through Group Policy. D. The Drain on Shutdown feature is managed through Desired State Configuration.

A. The Drain on Shutdown feature is enabled. A return value of 1 when you run the PowerShell command (Get-Cluster).DrainOnShutdown signifies that the Drain on Shutdown feature is enabled on the Hyper-V cluster node.

5. Which NLB cluster operation mode prevents cluster hosts from communicating with each other using their designated cluster network adapters. A. Unicast B. Multicast C. IGMP multicast D. Anycast

A. Unicast The Unicast Network Load Balancing (NLB) cluster operation mode prevents cluster hosts from communicating with each other using their designated cluster network adapters.

8. Which of the following is NOT an advanced network adapter feature setting in Windows Server 2016 Hyper-V? A. VLAN identification B. MAC address spoofing C. Protected network D. DHCP guard

A. VLAN identification VLAN identification is not an advanced network adapter feature setting in Windows Server 2016 Hyper-V.

3. WSUS uses __________ as its data store by default. A. Windows Internal Database B. SQL Server C. MySQL D. Oracle

A. Windows Internal Database Windows Server Update Services (WSUS) uses Windows Internal Database (WID) as its default data store. However, you can use a separate SQL Server instance instead.

10. You need to disable Drain on Shutdown on a cluster node. Complete the PowerShell: (Get-Cluster).DrainOnShutdown= A. -1 B. 0 C. 1 D. $false

B. 0 To disable Drain on Shutdown on a cluster node, run the PowerShell statement (Get-Cluster).DrainOnShutdown= 0. A value of 1 enables the feature.

9. What is the minimum number of hosts allowed in a Windows Server 2016 NLB cluster? A. 1 B. 2 C. 3 D. 4

B. 2 You can have between 2 and 32 hosts as members of a single Network Load Balancing (NLB) cluster in Windows Server 2016.

6. What is the recommended drive distribution for Storage Spaces Direct in Windows Server 2016? A. 3 SSD/3 HDD B. 2 SSD/4 HDD C. 4 SSD/2 HDD D. 5 SSD/1 HDD

B. 2 SSD/4 HDD The recommended drive distribution for Storage Spaces Direct in Windows Server 2016 is 2 solid-state disks (SSDs) for every four mechanical hard disk drives (HDDs).

5. Running a PowerShell script is an example of a Performance Monitor: A. Alert action B. Alert task C. Alert metadata D. Alert job

B. Alert task Running a PowerShell script is an example of a Performance Monitor alert task.

6. What is the action performed by the PowerShell statement Move-ClusterVirtualMachineRole -Name 'vm2' -node 'node5'? A. Quick Migration B. Live Migration C. Node drain D. Failback

B. Live Migration The PowerShell statement Move-ClusterVirtualMachineRole -Name 'vm2' -node 'node5' denotes a Live Migration of the Hyper-V virtual machine (VM) named vm2 to the cluster node named node5.

8. What STATE value should you expect when running the command sc query Windefend if Windows Defender is running properly on that server? A. SUCCESS B. RUNNING C. 0 D. 1

B. RUNNING You should expect a STATE value of RUNNING when running the command sc query Windefend if Windows Defender is running properly on that server.

6. Which of the following is a legitimate upgrade type in Windows Server 2016 NLB? A. Shared nothing upgrade B. Rolling upgrade C. Concurrent upgrade D. Targeted upgrade

B. Rolling upgrade The two NLB upgrade types supported in Windows Server 2016 are Simultaneous upgrade and Rolling upgrade.

2. Storage Spaces Direct in Windows Server 2016 is also known as: A. SSD B. S2D C. 2SD D. DS2

B. S2D Storage Spaces Direct in Windows Server 2016 is also known as S2D.

3. Which of the following is NOT a legitimate data source for a Data Collector Set? A. Performance counter B. System Center logs C. Event trace data D. System configuration information

B. System Center logs Data Collector sets have three data sources: Performance counter, Event trace data, and System configuration information.

9. Resource Monitor was introduced in: A. Windows Server 2003 R2 B. Windows Server 2008 R2 C. Windows Server 2012 R2 D. Windows Server 2016

B. Windows Server 2008 R2 Resource Monitor was introduced in Windows Server 2008 R2 for the server product line. For the desktop operating system product line, Resource Monitor first appeared in Windows Vista.

3. Network Health Protection is a Windows Server 2016 feature that detects whether a VM: A. has MAC spoofing enabled on its virtual network adapter B. has a functional connection to a designated network C. has a virtual network adapter that is part of a NIC team D. has IPv6 enabled

B. has a functional connection to a designated network Network Health Protection is a Windows Server 2016 feature that detects whether a VM has a functional connection to a designated network.

1. What counter does Performance Monitor display by default in Windows Server 2016? A. Disk Faults/Sec B. Total Pages/Sec C. % Processor Time D. Total Avail Memory

C. % Processor Time Performance Monitor displays the % Processor Time counter by default in Windows Server 2016.

1. A Windows Server 2016 Storage Spaces Direct cluster can consist of up to __________ nodes. A. 4 B. 8 C. 16 D. 32

C. 16 A Windows Server 2016 Storage Spaces Direct cluster can consist of up to 16 nodes with up to 400 drives.

1. What is the minimum hard disk space requirement for WSUS? A. 500 MB B. 1 GB C. 20 GB D. 100 GB

C. 20 GB The minimum hard disk space requirement for Windows Server Update Services (WSUS) is 20 GB, although Microsoft recommends a 40 GB minimum.

1. A Windows Server 2016 NLB cluster can contain up to _____ hosts. A. 8 B. 16 C. 32 D. 48

C. 32 A Windows Server 2016 Network Load Balancing (NLB) cluster can contain up to 32 hosts.

10. A single Storage Spaces Direct cluster can host up to ___________ drives. A. 50 B. 250 C. 400 D. 500

C. 400 A single Storage Spaces Direct cluster can host up to 400 drives.

5. What PowerShell command sets a Hyper-V VM for high availability? A. Add-VMHA B. Add-ClusterVMHA C. Add-ClusterVirtualMachineRole D. Add-ClusterVM

C. Add-ClusterVirtualMachineRole The Add-ClusterVirtualMachineRole PowerShell command sets a Hyper-V VM for high availability.

10. What tab appears by default when you first launch Resource Monitor in Windows Server 2016? A. Memory B. Network C. Overview D. CPU

C. Overview The Overview tab appears by default when you first launch Resource Monitor in Windows Server 2016.

8. What upgrade type for an NLB cluster involves the least downtime? A. Dynamic upgrade B. Static upgrade C. Rolling upgrade D. Simultaneous upgrade

C. Rolling upgrade The rolling upgrade type involves the least downtime for a Windows Server 2016 NLB cluster.

3. Which NLB port rule filtering type essentially uses NLB as a failover cluster for that rule? A. Disable B. Multiple Host C. Single D. Enable

C. Single The Single Network Load Balancing (NLB) port rule filtering type essentially uses NLB as a failover cluster for that rule.

2. Where do you specify the WSUS server location in Group Policy? A. Windows Server Update Services Location B. Internal Update Server C. Specify Intranet Microsoft Update Service Location D. WSUS Database

C. Specify Intranet Microsoft Update Service Location Use the "Specify Intranet Microsoft Update Service Location" Group Policy setting to point client devices to your WSUS server.

4. By default, when each client computer first contacts the WSUS server, WSUS adds the client computer to the All Computers and ________ groups. A. Domain Computers B. Local Computers C. Unassigned Computers D. Unmanaged Computers

C. Unassigned Computers By default, when each client computer first contacts the WSUS server, WSUS adds the client computer to the All Computers and Unassigned Computers groups.

10. Windows Server Backup writes its backup files in ______ format. A. ZIP B. BAK C. VHDX D. CAB

C. VHDX Windows Server Backup writes its backup files in VHDX format.

8. In Windows Server 2016 Performance Monitor, you can define Data Collector Sets either manually or: A. from an import from the Registry B. from an HTML definition file C. from a predefined template D. from a Resource Monitor export

C. from a predefined template In Windows Server 2016 Performance Monitor, you can define Data Collector Sets either manually or from a predefined template.

8. In a disaggregated Storage Spaces Direct cluster, you separate _____________ from your VM workloads. A. failover clustering B. security C. storage D. compute

C. storage In a disaggregated Storage Spaces Direct cluster, you separate storage from your VM workloads. In one cluster you have a Storage Spaces Direct Scale-Out File Server cluster workload, and in the second cluster you have your VM workloads.

7. On a server with three physical disks, the PhysicalDisk - Avg. Disk Queue Length counter value should not be larger than: A. 0 B. 1 C. 3 D. 6

D. 6 On a server with three physical disks, the PhysicalDisk - Avg. Disk Queue Length counter value should not be larger than 6, which is twice the number of physical disks installed on the server.

6. What visual representation does Resource Monitor use when information is filtered? A. A red filter label B. A green highlight C. An exclamation point D. An orange bar

D. An orange bar Resource Monitor denotes filtered data by presenting an orange bar below the title bar of each table.

3. What is the first step in deploying disaggregated S2D? A. Create virtual disks. B. Enable Storage Spaces Direct. C. Add the virtual disks to CSVs. D. Create a cluster.

D. Create a cluster. The first step in deploying disaggregated S2D is creating a failover cluster.

2. Which Performance Monitor tool is used to create baselines? A. Report Export B. Alerts C. Graphing D. Data Collector Set

D. Data Collector Set In Windows Server 2016 Performance Monitor, create Data Collector Sets (DCSs) to create system baselines.

7. What is the purpose of the -GenerateNewId switch parameter of the Import-VM cmdlet? A. Define a new IPv6 address B. Define a new hostname C. Define a new MAC address D. Define a new security identifier

D. Define a new security identifier The -GenerateNewId switch parameter of the Import-VM cmdlet defines a new security identifier (SID) for the new VM; this prevents conflicts with the original VM copy, which has the same SID.

2. You can use the _______ PowerShell cmdlet to clone a clustered Hyper-V VM. A. Get-VM B. Save-VM C. Clone-VM D. Export-VM

D. Export-VM You can use the Export-VM PowerShell cmdlet to clone a clustered Hyper-V virtual machine (VM).

2. Which of the following statements is true concerning Windows Server 2016 NLB? A. An NLB cluster can contain up to 16 hosts. B. NLB hosts must be configured identically. C. An NLB host can have only a single network adapter. D. No shared storage is required.

D. No shared storage is required. It is true that in Windows Server 2016 Network Load Balancing (NLB), no shared storage is required.

9. Which PowerShell command will drain the VMs from the current failover clustering node? A. Test-ClusterResourceFailure B. Stop-ClusterGroup C. Stop-ClusterResource D. Suspend-ClusterNode

D. Suspend-ClusterNode The Suspend-ClusterNode PowerShell command drains the VMs from the current failover clustering node to a healthy node in the cluster.

7. Which of the following is NOT a valid way to manage Windows Defender in Windows Server 2016? A. Group Policy B. PowerShell C. WMI D. XML

D. XML You can manage Windows Defender on Windows Server 2016 by using Group Policy, PowerShell, or Windows Management Instrumentation (WMI).

5. A new WSUS server can synchronize its content with either Microsoft Update or: A. A SQL Server database server B. an up-to-date client computer C. a downstream WSUS server D. an upstream WSUS server

D. an upstream WSUS server A new WSUS server can synchronize its content with either Microsoft Update or an upstream WSUS server.

10. What term describes the synchronization among NLB cluster hosts? A. affinity B. utilization C. unification D. convergence

D. convergence Convergence is the term used to describe the synchronization that occurs among NLB cluster hosts.