CCNA 200-301 Chapter 11 Questions

110

OSPF has an Administrative Distance of?

OSPF

Which of two routes will be chosen when Administrative Distance is used to elect a route?

Floating Static Route

A backup route for an existing primary route, which is a static route with an increased Administrative Distance that is higher than the primary route.

GWLR (Gateway of Last Resort)

A route used if there is no matching destination network in the routing table for a packet.

ip route

Command used to specify the destination network, the subnet mask, and the IP address of where to send the data to reach that network.

encapsulation

Command used to specify the trunking. encapsulation, and VLAN number for the subinterface.

1. 0.0.0.0 2. 0.0.0.0

The GWLR (Gateway of Last Resort) can be configured by adding a static route and subnet address of?

longest network prefix

The router chooses the best route by first matching the packet to the route with?

B. ip route 0.0.0.0 0.0.0.0 192.168.9.1

What command is used to add the Gateway of Last Resort of 192.168.9.1 to the router? A. ip route 192.168.9.1 0.0.0.0 B. ip route 0.0.0.0 0.0.0.0 192.168.9.1 C. network route 0.0.0.0 0.0.0.0 192.168.9.1 D. default route 192.168.9.1

A. 120

What is the Administrative Distance of RIP? A. 120 B. 110 C. 1 D. 90

B. 110

What is the Administrative Distance value for OSPF? A. 120 B. 110 C. 1 D. 90

D. Longest Matching prefix

What is the first technique used by the router selection process to select a route for a packet? A. Administrative Distance B. Dynamic Routing Protocol used C. Routing Protocol metric D. Longest Matching prefix

B. encapsulation

Which Router-on-a-Stick command defines the VLAN for the interface? A. vlan B. encapsulation C. trunk D. frame-type

B. 0000.0c07.ac18

Which of the following is a valid virtual MAC address for an HSRP group? A. 0000.6e00.0014 B. 0000.0c07.ac18 C. 0000.ac07.0c0a D. 0000.0cac.0c0f

virtual MAC address

Which part of HSRP begins with 0000.0c07.ac?

C. OSPF

Your router is running RIP and OSPF, and both routing protocols are learning 192.168.1.0/24. Which routing protocol will you router use for the route? A. Both B. RIP C. OSPF D. Neither

D. Add a static route with a larger AD.

How do you create a Floating Static Route? A. Add a static route with a smaller AD. B. Add a dynamic route with a smaller AD. C. Add RIP with an AD of 1. D. Add a static route with a larger AD.

120

RIP has an Administrative Distance of?

OSPF

Routing Protocol that has an Administrative Distance of 110.

RIP

Routing Protocol that has an Administrative Distance of 120.