Chapter 11 Fin 3403

Which one of these combinations must increase the contribution margin? A. Increasing both the sales price and the variable cost per unit B. Increasing the sales quantity and decreasing the variable cost per unit. C. Decreasing the sales price and increasing the sales quantity. D. Decreasing both fixed costs and depreciation expense. E. Increasing the sales price and decreasing the variable cost per unit.

Increasing the sales price and decreasing the variable cost per unit

Webster Iron Works started a new project last year. As it turns out, the project has been operating at its accounting break-even level of output and is now expected to continue at that level over its lifetime. Given this, you know that the project: A. Will never pay back. B. Has a zero net present value. C. Is operating at a higher level than if it were operating at its cash break-even level. D. Is operating at a higher level than if it were operating at its financial break-even level. E. Is lowering the total net income of the firm.

Is operating at a higher level than if it were operating at its cash break-even level.

The base case values used in scenario analysis are the values considered to be the most: A. Optimistic. B. Desired by management. C. Pessimistic. D. Likely to create a positive net present value. E. Likely to occur.

Likely to occur

You are considering a project and are concerned about the reliability of the cash flow forecasts. To reduce any potentially harmful results from accepting this project, you should consider: A. Lowering the degree of operating leverage. B. Lowering the contribution margin per unit. C. Increasing the initial cash outlay. D. Increasing the fixed costs per unit. E. Lowering the operating cash flow.

Lowering the degree of operating leverage

The president of Global Wholesalers would like to offer special sale prices to the firm's best customers under the following terms: 1. The prices will apply only to units purchased in excess of the quantity normally purchased by a customer. 2. The units purchased must be paid for in cash at the time of sale. 3. The total quantity sold under these terms cannot exceed the excess capacity of the firm. 4. The net profit of the firm should not be affected. 5. The prices will be in effect for one week only. Given these conditions, the special sale price should be set equal to the: A. Average variable cost of materials only. B. Average cost of all variable inputs. C. Sensitivity value of the variable costs. D. Marginal cost of materials only. E. Marginal cost of all variable inputs.

Marginal cost of all variable inputs

Which of the following are inversely related to variable costs per unit? A. Sales quantity and sales price. B. Net profit per unit and sales quantity. C. Operating cash flow and sales quantity. D. Operating cash flow per unit and contribution margin per unit. E. Contribution margin per unit and marginal costs.

Operating cash flow per unit and contribution margin per unit

A decrease in which one of the following will increase the accounting break-even quantity? Assume straight-line depreciation is used and ignore taxes. A. Sales price per unit. B. Management salaries. C. Variable labor costs per unit. D. Initial fixed asset purchases. E. Fixed costs.

Sales price per unit

The contribution margin per unit is equal to the: A. Sales price per unit minus the total costs per unit. B. Variable cost per unit minus the fixed cost per unit. C. Sales price per unit minus the variable cost per unit. D. Pretax profit per unit. E. Aftertax profit per unit.

Sales price per unit minus the variable cost per unit

Steve is fairly cautious when analyzing a new project and thus he projects the most optimistic, the most realistic, and the most pessimistic outcome that can reasonably be expected. Which type of analysis is Steve using? A. Simulation testing. B. Sensitivity analysis. C. Break-even analysis. D. Rationing analysis. E. Scenario analysis.

Scenario analysis

Which type of analysis identifies the variable, or variables, that are most critical to the success of a particular project? A. Scenario B. Simulation C. Break-even D. Sensitivity E. Cash flow

Sensitivity

A firm's managers realize they cannot monitor all aspects of their projects but do want to maintain a constant focus on the key aspect of each project in an attempt to maximize their firm's value. Given this specific desire, which type of analysis should they require for each project and why? A. Sensitivity analysis; to identify the key variable that affects a project's profitability. B. Scenario analysis; to guarantee each project will be profitable. C. Cash breakeven; to ensure the firm recoups its initial investment. D. Accounting breakeven; to ensure each project earns its required rate of return. E. Financial breakeven; to ensure each project has a positive NPV.

Sensitivity analysis; to identify the key variable that affects a project's profitability

An analysis that combines scenario analysis with sensitivity analysis is called _____ analysis. A. Forecasting B. Combined C. Complex D. Simulation E. Break-even

Simulation

Which one of the following types of analysis is the most complex to conduct? A. Scenario B. Break-even C. Sensitivity D. Degree of operating leverage E. Simulation

Simulation

Brubaker & Goss has received requests for capital investment funds for next year from each of its five divisions. All requests represent positive net present value projects. All projects are independent. Senior management has decided to allocate the available funds based on the profitability index of each project since the company has insufficient funds to fulfill all of the requests. Management is following a practice known as: A. Scenario analysis. B. Sensitivity analysis. C. Leveraging. D. Hard rationing. E. Soft rationing.

Soft rationing

The procedure of allocating a fixed amount of funds for capital spending to each business unit is called: A. Marginal spending. B. Capital preservation. C. Soft rationing. D. Hard rationing. E. Marginal rationing.

Soft rationing

Uptown Promotions has three divisions. As part of the planning process, the CFO requested that each division submit its capital budgeting proposals for next year. These proposals represent positive net present value projects that fall within the long-range plans of the firm. The requests from the divisions are $4.2 million, $3.1 million, and $6.8 million. For the firm as a whole, management has limited spending to $10 million for new projects next year even though the firm could afford additional investments. This is an example of: A. Scenario analysis. B. Sensitivity analysis. C. An operating leverage application. D. Soft rationing. E. Hard rationing.

Soft rationing

Which one of the following will best reduce the risk of a project by lowering the degree of operating leverage? A. Hiring additional employees rather than using temporary outside contractors. B. Subcontracting portions of the project rather than purchasing new equipment to do all the work in-house. C. Buying equipment rather than leasing it short-term. D. Lowering the projected selling price per unit. E. Changing the proposed labor-intensive production method to a more capital intensive method.

Subcontracting portions of the project rather than purchasing new equipment to do all the work in-house

A project has a payback period that exactly equals the project's life. The project is operating at: A. Its maximum capacity. B. The financial break-even point. C. The cash break-even point. D. The accounting break-even point. E. A zero level of output.

The accounting break-even point

Which one of the following characteristics relates to the cash break-even point for a given project? I. The project never pays back. II. The IRR equals the required rate of return. III. The NPV is equal to zero. IV. The operating cash flow is equal to the depreciation expense. A. The project never pays back. B. The discounted payback period equals the project's life. C. The NPV is equal to zero. D. The IRR equals the required rate of return. E. The OCF is equal to the depreciation expense.

The project never pays back

Assume you graph a project's net present value given various sales quantities. Which one of the following is correct regarding the resulting function? A. The steepness of the function relates to the project's degree of operating leverage. B. The steeper the function, the less sensitive the project is to changes in the sales quantity. C. The resulting function will be a hyperbole. D. The resulting function will include only positive values. E. The slope of the function measures the sensitivity of the net present value to a change in sales quantity.

The slope of the function measures the sensitivity of the net present value to a change in sales quantity

Variable costs can be defined as the costs that: A. Remain constant for all time periods. B. Remain constant over the short run. C. Vary directly with sales. D. Are classified as noncash expenses. E. Are inversely related to the number of units sold.

Vary directly with sales

Simulation analysis is based on assigning a _____ and analyzing the results. A. Narrow range of values to a single variable. B. Narrow range of values to multiple variables simultaneously. C. Wide range of values to a single variable. D. Wide range of values to multiple variables simultaneously. E. Single value to each of the variables.

Wide range of values to multiple variables simultaneously

When you assign the highest anticipated sales price and the lowest anticipated costs to a project, you are analyzing the project under the condition known as: A. Best case sensitivity analysis. B. Worst case sensitivity analysis. C. Best case scenario analysis. D. Worst case scenario analysis. E. Base case scenario analysis.

Worst case scenario analysis

Fixed costs: A. Change as a small quantity of output produced changes. B. Are constant over the short-run regardless of the quantity of output produced. C. Are defined as the change in total costs when one more unit of output is produced. D. Are subtracted from sales to compute the contribution margin. E. Can be ignored in scenario analysis since they are constant over the life of a project.

are constant over the short-run regardless of the quantity of output produced

Scenario analysis is best suited to accomplishing which one of the following when analyzing a project? A. Determining how fixed costs affect NPV. B. Estimating the residual value of fixed assets. C. Identifying the potential range of reasonable outcomes. D. Determining the minimal level of sales required to breakeven on an accounting basis. E. Determining the minimal level of sales required to breakeven on a financial basis.

identifying the potential range of reasonable outcomes

The degree of operating leverage is equal to: A. 1 + OCF / (FC + VC). B. 1 + OCF / FC. C. 1 + FC/OCF. D. 1 + VC/OCF. E. 1 - (FC + VC)/OCF.

1 + FC/OCF.

Forecasting risk emphasizes the point that the correctness of any decision to accept or reject a project is highly dependent upon the: A. Method of analysis used to make the decision. B. Initial cash outflow. C. Ability to recoup any investment in net working capital. D. Accuracy of the projected cash flows. E. Length of the project.

Accuracy of the projected cash flows

Bell Weather Goods has several proposed independent projects that have positive NPVs. However, the firm cannot initiate any of the projects due to a lack of financing. This situation is referred to as: A. Financial rejection. B. Project rejection. C. Soft rationing. D. Marginal rationing. E. Capital rationing.

Capital Rationing

Valerie just completed analyzing a project. Her analysis indicates that the project will have a six-year life and require an initial cash outlay of $320,000. Annual sales are estimated at $589,000 and the tax rate is 34 percent. The net present value is a negative $320,000. Based on this analysis, the project is expected to operate at the: A. Maximum possible level of production. B. Minimum possible level of production. C. Financial break-even point. D. Accounting break-even point. E. Cash break-even point.

Cash break-even point

When the operating cash flow of a project is equal to zero, the project is operating at the: A. Maximum possible level of production. B. Minimum possible level of production. C. Financial break-even point. D. Accounting break-even point. E. Cash break-even point.

Cash break-even point

Which one of these is most associated with an IRR of -100 percent? A. Degree of operating leverage. B. Accounting break-even point. C. Contribution margin. D. Simulation analysis. E. Cash break-even point.

Cash break-even point

Theresa is analyzing a project that currently has a projected NPV of zero. Which one of the following changes that she is considering is most apt to cause that project to produce a positive NPV instead? Consider each change independently. A. Decrease the sales price. B. Increase the materials cost per unit. C. Decrease the labor hours per unit produced. D. Decrease the sales quantity. E. Increase the amount of the initial investment in net working capital.

Decrease the labor hours per unit produced

Which one of the following is the relationship between the percentage change in operating cash flow and the percentage change in quantity sold? A. Degree of sensitivity. B. Degree of operating leverage. C. Accounting break-even. D. Cash break-even. E. Contribution margin.

Degree of operating leverage

Sensitivity analysis determines the: A. Range of possible outcomes given that most variables are reliable only within a stated range. B. Degree to which the net present value reacts to changes in a single variable. C. Net present value range that can be realized from a proposed project. D. Degree to which a project relies on its fixed costs. E. Ideal ratio of variable costs to fixed costs for profit maximization.

Degree to which the net present value reacts to changes in a single variable

Scenario analysis is defined as the: A. Determination of the initial cash outlay required to implement a project. B. Determination of changes in NPV estimates when what-if questions are posed. C. Isolation of the effect that a single variable has on the NPV of a project. D. Separation of a project's sunk costs from its opportunity costs. E. Analysis of the effects that a project&'s terminal cash flows has on the project's NPV.

Determination of changes in NPV estimates when what-if questions are posed

Given the following, which feature identifies the most desirable level of output for a project? A. Operating cash flow equal to the depreciation expense. B. Payback period equal to the project's life. C. Discounted payback period equal to the project's life. D. Zero IRR. E. Zero operating cash flow.

Discounted payback period equal to the project's life

The CFO of Edward's Food Distributors is continually receiving capital funding requests from its division managers. These requests are seeking funding for positive net present value projects. The CFO continues to deny all funding requests due to the financial situation of the company. Apparently, the company is: A. Operating at the accounting break-even point. B. Operating at the financial break-even point. C. Facing hard rationing. D. Operating with zero leverage. E. Operating at maximum capacity.

Facing hard rationing

Assume a project has a discounted payback that equals the project's life. The project's sales quantity must be at which one of these break-even points? A. Accounting B. Leveraged C. Marginal D. Cash E. Financial

Financial

Which one of the following represents the level of output where a project produces a rate of return just equal to its requirement? A. Capital break-even. B. Cash break-even. C. Accounting break-even. D. Financial break-even. E. Internal break-even.

Financial break-even

You would like to know the minimum level of sales that is needed for a project to be accepted based on its net present value. To determine that sales level you should compute the: A. Contribution margin per unit and set that margin equal to the fixed costs per unit. B. Degree of operating leverage at the current sales level. C. Accounting break-even point. D. Cash break-even point. E. Financial break-even point.

Financial break-even point

Operating leverage is the degree of dependence a firm places on its: A. Variable costs. B. Fixed costs. C. Sales. D. Operating cash flows. E. Depreciation tax shield.

Fixed Costs

Which of the following variables will be forecast at their highest expected level under a worst case scenario? A. Fixed costs and salvage value. B. Variable costs and sales price C. Fixed costs and sales price. D. Fixed and variable costs. E. Initial cost and salvage value.

Fixed and variable costs

As the degree of sensitivity of a project to a single variable rises, the: A. Less important the variable is to the final outcome of the project. B. Less volatile the project's net present value is to that variable. C. Greater is the importance of accurately predicting the value of that variable. D. Greater is the sensitivity of the project to the other variable inputs. E. Less volatile is the project's outcome.

Greater is the importance of accurately predicting the value of that variable

PC Enterprises wants to commence a new project but is unable to obtain the financing under any circumstances. This firm is facing: A. Financial deferral. B. Financial allocation. C. Capital allocation. D. Marginal rationing. E. Hard rationing.

Hard rationing

Which one of the following characteristics best describes a project that has a low degree of operating leverage? A. High variable costs relative to the fixed costs. B. Relatively high initial cash outlay. C. OCF that is highly sensitive to the sales quantity. D. High level of forecasting risk. E. High depreciation expense.

High variable costs relative to the fixed costs

Which of the following values will be equal to zero when a firm is operating at the accounting break-even level of output? A. IRR and OCF. B. Net income and contribution margin. C. IRR and net income. D. OCF and NPV. E. Net income and NPV.

IRR and net income

Assume both the discount and tax rates are positive values. At the financial break-even point, the: A. Payback period equals the project life. B. NPV is negative. C. OCF is zero. D. Contribution margin per unit equals the fixed costs per unit. E. IRR equals the required return.

IRR equals the required return

Forecasting risk is defined as the possibility that: A. Some proposed projects will be rejected. B. Some proposed projects will be temporarily delayed. C. Incorrect decisions will be made due to erroneous cash flow projections. D. Some projects will be mutually exclusive. E. Tax rates could change over the life of a project.

Incorrect decisions will be made due to erroneous cash flow projections

Steve, the sales manager for TL Products, wants to sponsor a one-week "Customer Appreciation Sale"where the firm offers to sell additional units of a product at the lowest price possible without negatively affecting the firm's profits. Which one of the following represents the price that should be charged for the additional units during this sale? A. Average variable cost. B. Average total cost. C. Average total revenue. D. Marginal revenue. E. Marginal cost.

Marginal Cost

The change in variable costs that occurs when production is increased by one unit is referred to as the: A. Marginal cost. B. Average cost. C. Total cost. D. Scenario cost. E. Net cost.

Marginal Cost

The change in revenue that occurs when one more unit of output is sold is referred to as: A. Marginal revenue. B. Average revenue. C. Total revenue. D. Erosion. E. Scenario revenue.

Marginal Revenue

By definition, which one of the following must equal zero at the accounting break-even point? A. Net present value. B. Internal rate of return. C. Contribution margin. D. Net income. E. Operating cash flow.

Net Income

By definition, which one of the following must equal zero at the cash break-even point? A. Net present value. B. Internal rate of return. C. Contribution margin. D. Net income. E. Operating cash flow.

Operating Cash Flow

Which one of the following statements concerning scenario analysis is correct? A. The pessimistic case scenario determines the maximum loss, in current dollars, that a firm could possibly incur from a given project. B. Scenario analysis defines the entire range of results that could be realized from a proposed investment project. C. Scenario analysis determines which variable has the greatest impact on a project's final outcome. D. Scenario analysis helps managers analyze various outcomes that are possible given reasonable ranges for each of the assumptions. E. Management is guaranteed a positive outcome for a project when the worst- case scenario produces a positive NPV.

Scenario analysis helps managers analyze various outcomes that are possible given reasonable ranges for each of the assumptions

An analysis of the change in a project's NPV when a single variable is changed is called _____ analysis. A. Forecasting B. Scenario C. Sensitivity D. Simulation E. Break-even

Sensitivity

Which one of the following will be used in the computation of the best-case analysis of a proposed project? A. Minimal number of units that are expected to be produced and sold. B. The lowest expected salvage value that can be obtained for a project's fixed assets. C. The most anticipated sales price per unit. D. The lowest variable cost per unit that can reasonably be expected. E. The highest level of fixed costs that is actually anticipated.

The lowest variable cost per unit that can reasonably be expected

A project has a projected IRR of negative 100 percent. Which one of the following statements must also be true concerning this project? A. The discounted payback period equals the life of the project. B. The operating cash flow is positive and equal to the depreciation. C. The net present value of the project is negative and equal to the initial investment. D. The payback period is exactly equal to the life of the project. E. The net present value of the project is equal to zero.

The net present value of the project is negative and equal to the initial investment