Chapter 4

5. When adding a DHCP reservation for a printer, which components should be included in the reservation? (Choose two answers.) a. The MAC address b. The default gateway c. The printer server name d. The IP address

a, d

1. A scope called Scope1 (192.168.3.0/24) is running out of addresses. Which of the following actions expands the number of addresses? a. Create a 192.168.4.0 scope and create a superscope. b. Create an IPv6 scope. c. Reassign the scope to 172.24.3.0/16. d. Create a multicast scope.

a

3. Which type of IPv6 address mechanism is used to generate link-local addresses using the MAC address? a. Stateless b. Stateful c. Prefix-based d. Multicast

a

1. Which setting blocks a range of MAC addresses from being issued DHCP server addresses? a. MAC filters b. DHCP policies c. Reservations d. Server options

b

10. A server is running Windows Server 2016 with five networks. Two teams are created, each with two NICs. You want to use reservations to always assign the same IP addresses to the interfaces. How many reservations are needed on the DHCP server? a. 2 b. 3 c. 4 d. 5

b

9. You manage the following DHCP scope: 192.168.1.0/24 and you need to migrate the clients to 172.24.1.0/16. Which type of scope should be created to perform the migration? a. A multicast scope b. A superscope c. A split scope d. An IPv6 scope

b

11. When performing a DHCP server migration from Windows Server 2012 R2 to Windows Server 2016, which command is used on the source server? a. NETSH b. Export-SmigServerSetting c. Export-DHCPServer d. Copy-Item

c

12. In which of the following dialog boxes would the PTR record registration for a single IP range be disabled? a. DHCP Server Properties b. IPv4 Properties c. Scope Properties d. DHCP Policies

c

2. Which type of communication sends a single set of packets to multiple hosts at the same time? a. Unicast b. Broadcast c. Multicast d. Anycast

c

4. Which of the following is the default DHCP failover mode? a. Stateless b. Stateful c. Load Sharing d. Hot Standby

c

8. You manage a 192.168.1.0/24 subnet. Using DHCP, you want IP phones to be assigned addresses 192.168.1.51-100 and desktop computers assigned addresses 192.168.1.101-155. How should you proceed while keeping the administrative effort to a minimum? a. Create a multicast scope. b. Create a superscope. c. Use DHCP policies. d. Create multiple standard scopes.

c

2. You administer a scope that covers the 172.50.1.0/24 subnet. Specify the correct order of steps necessary to expanding the scope to 172.50.2.0 by placing the number of the step in the appropriate space. Not all steps will be used. a Right-click IPv4 and choose New Superscope. b Duplicate the current scope. c Create a new scope. d Create two new scopes. e Select two scopes that you want to combine and finish creating the superscope. f Right-click the original scope and expand the address range.

c, a, e

6. After just installing a new DHCP server, you try to start the DHCP service, but it will not start. Which of the following actions should be performed? a. Restart the server. b. Configure a scope. c. Activate the scope. d. Authorize the server in Active Directory.

d

7. A server is running Windows Server 2016. You want to assign the same IP address from the DHCP server to the server every time. Which of the following is the next course of action? a. Create a DHCP policy. b. Create an exclusion policy. c. Create a single scope with the specified address. d. Create a reservation.

d

1. Specify the correct order of steps necessary to allocating a different range of IP addresses to network HP printers within a scope and a different lease period by placing the number of the step in the appropriate space. Not all steps will be used. a Create a scope. b Set the lease duration for the policy. c Create a policy. d Create a client identifier. e Create a user class. f Create a vendor class. g Configure a condition.

f, a, c, g, b