Chapter 5: special fasteners
What three diameters our standard for most blind rivets
1/8, 5/32, 3/16 of an inch
What alloys are used to make cherry buck fasteners
6AL-4V upper shank & Ti-Cb lower shank
Why can a cherry Max blind rivet be used to replace a solid shank rivet
Because the sender stem is locked in place with a ring
What is the advantage of the tool used to install an Olympic lock rivet
Can be used on any head within the size range
Name three blind fasteners that use stem locking devices
Cherry Max , Olympic lock, and Huck clinch
Name three conventional, non-blind special fasteners
Cherry bucks, lockbolts, taper locks
What two head styles seem to be most common on blind fasteners
Counter sunk and universal heads
What advantage does a cherry buck have over a high lock fastener
Does not use a collar, it is driven like a solid shank rivet
Name three cowling and access cover fasteners
Dzus, camlok, airloc
How are blind rivets with liking stems removed
File off the retaining ring, tap the stem out, and drill the MFG head off
Which blind fastener has a locking device which is part of the manufactured rivet head
Huck I NAS1900
What rule governs the installation of a cherry lock friction rivet when it is used to replace a solid shank rivet
It must be 1/32 inch longer than the silod shank river
Name the two different types of lock bolts
Share and tension
Which is the strongest special Fastner
Taper lock
Where are blind fasteners use the most successfully
We're solid shank rivets cannot be bucked