CNET 201 Windows Server Exam 2
Rishab is looking for ways to manage duplicate file content on his organization's shared drive. He enables data deduplication for this purpose. To save computing resources, he wants to change the settings such that data deduplication occurs in the evening. What must Rishab do to make this change? Click Set Deduplication Schedule Enter the file extensions to be excluded Select the Apply button under Deduplication Settings Click the Add button under Deduplication Settings
Click Set Deduplication Schedule
While copying files between folders, it is possible to retrace and complete the transfer in case of a power failure if an NTFS-based filesystem is being used. The same cannot be said for a FAT32 filesystem. What do you think could be the reason for this difference? NTFS is a filesystem, while FAT32 is not. FAT32 is only used as a removable device, while NTFS is not. FAT32 keeps track of information being written, while NTFS does not. NTFS is a journaling filesystem, while FAT32 is not.
NTFS is a journaling filesystem, while FAT32 is not.
Rebecca is configuring a RAID with three storage devices. If she saves a file, the file will be divided into three sections, with each section written to separate storage devices concurrently, in a third of the amount of time it would take to save the entire file on one storage device. Which of the following RAID levels is Rebecca configuring? RAID level 5 RAID level 2 RAID level 1 RAID level 0
RAID level 0
Identify a vital service provided by secondary DNS servers. Secondary DNS servers improve security by preventing access to primary DNS servers. Secondary DNS servers respond to DNS lookup requests using read-only zone files. Secondary DNS servers divert all traffic to primary DNS servers to reduce load. Secondary DNS servers contain read-write copies of a primary DNS server's data.
Secondary DNS servers respond to DNS lookup requests using read-only zone files.
Felicia is drafting an email to her colleague Rhonda. After Felicia types out the email, she enters the email address [email protected] and clicks Send. Felicia's email server uses the email address typed to locate the recipient email server. Which DNS resource record for zoneA.com allows Felicia's email server to locate the recipient email server? The CNAME record The AAAA record The MX record The A record
The MX record
Aspen sets up the round robin feature in DNS for an FQDN server, server.domainA.com. She creates two identical Web servers with IP addresses 192.168.1.75 and 172.6.0.15 and associates two A records on the FQDN server with these IP addresses. The first A record is associated with the Web server having the IP address 192.168.1.75, and the second A record is associated with the Web server having the IP address 172.6.0.15. Aspen uses a client with the IP address 172.6.0.95 to perform a forward lookup of server.domainA.com. Which of the following is true of this scenario? The FQDN server will return one of the IP addresses because of the round robin feature setup. The client will contact the Web server with the address 172.6.0.15. The FQDN server will return both IP addresses, 192.168.1.75 followed by 172.6.0.15. The client will contact the Web server with the address 192.168.1.75.
The client will contact the Web server with the address 172.6.0.15.
What happens when a print job exceeds the print device storage capacity? The print jobs are divided into smaller parts and sent to the print device sequentially. The print jobs are sent to the Server Message Block (SMB). The rendering process slows down, which results in a decrease in the print job. The Print Spooler service increases the print device storage capacity.
The print jobs are divided into smaller parts and sent to the print device sequentially.
Documents are rendered into print jobs on the print client by default. a. True b. False
a. True
DHCP reservations must use the DHCP options from their scope. a. True b. False
b. False
Which of the following represents the maximum amount of time that a DNS server or resolver is allowed to cache the result of a forward lookup? a. Zone transfer b. TTL c. Root hints d. PTR
b. TTL
Which of the following RAID volume types provide fault tolerance in the event of a single storage device failure? (Choose all that apply.) a. striping b. striping with parity c. mirroring d. JBOD
b. striping with parity c. mirroring
The manager of the Accounting department needs to be able to print to the shared printer within the Accounting department, as well as manage other user's print jobs within the print queue. What printer permissions must you assign to the manager on the shared printer at minimum? a. Print b. Manage Documents c. Print and Manage Documents d. Manage Documents and Manage Printers
c. Print and Manage Documents
After noticing a RAID level 5 volume in Disk Management with a status of Failed Redundancy, you located and replaced the failed storage device with a new one. What must you do to return the volume status to Healthy? a. Nothing, as the data will automatically be rebuilt on the new storage device b. Right-click the RAID volume and click Reactivate Volume c. Right-click the RAID volume, click Repair Volume, and select the new storage device d. Delete and recreate the RAID volume, and then restore data from a backup
c. Right-click the RAID volume, click Repair Volume, and select the new storage device
Which of the following features must you install on a Windows print client in order to print to a shared printer using SMB? a. Internet Printing Client b. LPR Port Monitor c. SMB Printer Client d. None of the above
d. None of the above
Which resource record stores zone transfer settings? a. NS b. PTR c. A d. SOA
d. SOA
Which of the following is a term given to the software component in the operating system that connects to the SAN device via iSCSI? MPIO HBA iSCSI initiator iSCSI target
iSCSI initiator
Your university has installed a shared printer, Print_MV, on SERVERX. To accommodate the large amount of print jobs generated by the students, the spool folder needs to be placed in a storage device with a large capacity. Which of the following tabs under the print server properties dialog box can be used for this purpose? Drivers Advanced Port Security
Advanced
Which of the following organizations does not need to install a WINS server? An organization that has DNS servers installed An organization that uses shared folders on computers with NetBIOS names An organization that uses modern operating systems such as Windows 10 An organization that has disabled NetBIOS on its computers
An organization that has disabled NetBIOS on its computers
As a system administrator, you are tasked with identifying the reason for print jobs not getting completed. You notice that the queue status against one of the printers is "paused." This does not provide a specific reason. To ease the process of troubleshooting in the future, you want the queue status to show specific notifications from the printer. Which of the following options would you enable for this purpose? Branch office direct printing List in the directory Bidirectional printing Printer pooling
Bidirectional printing
Which of the following options on a print queue webpage refreshes the list of print jobs within the print queue when selected? Document List All Printers Properties Cancel All Documents
Document List
Merjem, a PhD student, is writing her thesis. She takes regular backup of her files and data. When taking backup, she chooses the Faster backup performance option in the Optimize Backup Performance window. Which of the following is true of the backup process in the given scenario? The backup process backs up the all the specified data every time. Every backup overwrites the previous backup. Every backup only backs up data that has been modified since the previous backup. The backup process will provide the fastest option at the time of restoring data.
Every backup only backs up data that has been modified since the previous backup.
Nodin, a trainee system administrator, is configuring a shared print device, PrinterA, on a colleague's computer. PrinterA is shared through ServerV. He uses the format below to successfully configure the print device. \\ServerV\PrinterA Identify the protocol that he most likely used. SMB IPP LDP SMS
SMB
Which of the following commands can be used within Windows PowerShell to view and manage print jobs within the print queue for a printer? Restart-Service spooler-force Suspend-PrinJob Set-Printer printername-restart http://serverx/printers
Suspend-PrinJob
Which of the following is the most likely cause for missing resource records in a secondary zone? An invalid entry in the DNS cache Zone transfer issues Manual DNS cache flushing Zones that allow dynamic updates
Zone transfer issues
Users can access a webpage to view and manage their own print jobs provided that the Internet Printing component of the Print and Document Services role is installed on the print server. a. True b. False
a. True
When initializing a new storage device that has a capacity larger than 2 TB, you must use a GPT instead of an MBR. a. True b. False
a. True
When restoring a backup, you can choose to restore the data to a different location. a. True b. False
a. True
When you click the Optimize button for a simple volume in the Optimize Drives window, the underlying storage device is defragmented if it is a hard disk, or trimmed if it is an SSD. a. True b. False
a. True
You can configure auditing for a shared printer provided that the Audit object access policy setting is configured within a Group Policy that applies to the print server. a. True b. False
a. True
A user complains that they are unable to contact a specific server in your organization. You remember that you recently modified the A record for this server on your organization's Active Directory-integrated DNS server. Which troubleshooting step should you try first to remedy the issue? a. Clear the DNS cache on the DNS server b. Clear the DNS cache on the user's computer c. Run the nslookup command on the user's computer d. Restart the DNS Server service
b. Clear the DNS cache on the user's computer
On systems that have a UEFI BIOS, the UEFI system partition is the boot partition. a. True b. False
b. False
When creating a RAID volume using Server Manager, each storage device is automatically converted to a dynamic disk. a. True b. False
b. False
Which of the following commands can be used to restart the Print Spooler service within Windows PowerShell? a. Net-Restart PrintSpooler b. Restart-Service spooler -force c. Restart-PrintSpooler d. Set-Printer printername -restart
b. Restart-Service spooler -force
Which service can be started on a system to reduce the amount of time it takes to repair filesystem errors? a. Storage Spaces b. Spot Verifier c. Volume Repair d. Data Deduplication
b. Spot Verifier
You would like to ensure that an SMB shared printer is automatically configured on client computers within your organization. What must you do? a. Access the Sharing tab of the printer and select List in the directory. b. Create a shared printer object within Active Directory Users and Computers. c. Access the Advanced tab of the printer and select Auto deploy printer to client computers. d. Select the printer within the Print Management tool and click More Actions, Deploy with Group Policy from the Actions menu.
d. Select the printer within the Print Management tool and click More Actions, Deploy with Group Policy from the Actions menu.
Leisl configures multiple WINS servers on her organization's network. She wants the WINS servers to be able to share the NetBIOS records with each other. Which of the following features should Leisl use? A stub zone Nslookup Debug logging A replication partner
A replication partner
You are the administrator for an Active Directory domain and have been tasked with improving the response time for resolving DNS queries for resources in a second company-owned domain that does not use Active Directory. What type of zone can be used to accomplish this task with minimal overhead? A reverse zone A forward zone A glue zone A stub zone
A stub zone
What resource record type defines an IPv6 host address in DNS? AAAA record PTR CNAME record A record
AAAA record
Which printer server configuration task is performed before shared printers are added within the Print Management tool? Deploy with Group Policy Add manufacturer-supplied printer drivers for the associated print device Render print jobs on client computers Change the printer name, location, and comment
Add manufacturer-supplied printer drivers for the associated print device
Carlos is configuring a DHCP server in his organization. Some of the computers in his organization contain manually configured IP addresses. Currently, he is setting up the new server to configure IP addresses for users who operate their mobile devices on the organization's network. Which of the following decisions should Carlos reevaluate? Carlos sets the subnet mask as 255.255.255.0. Carlos provides a subnet delay of 100 milliseconds. Carlos excludes certain IP addresses. Carlos sets the lease duration to 7 days.
Carlos sets the lease duration to 7 days.
A print device, Printer_2AC, is installed on SEVERX within your organization. The printer must be automatically added to each computer added to the domain. Which of the following options can be used for this purpose? Enable advanced printing features Audit object access policy Use the Add Printer wizard Deploy with Group Policy
Deploy with Group Policy
Which of the following options will allow a shared printer to be automatically published, allowing domain users to search for the Print window? List in the directory Enable advanced printing Branch Office Direct Printing Enable printer pooling
List in the directory
Imran is associating a drive letter to a filesystem so that the drive letter can be accessed by the operating system. What is the term given to the process that Imran is carrying out? Spanning Journaling Formatting Mounting
Mounting
Which of the following is the default format used to store documents received by the GDI API for modern print devices? RAW (FF appended) NT EMF RAW (FF auto) GDI2XPS
NT EMF
Madison is using the Backup Schedule Wizard from the Actions pane of the Windows Server Backup tool. He selects the backup configuration as Custom and specifies the items to be backed up. While adding the items to be backed up, he happens to select the System state option. What does this option create a backup of? Boot and recovery volumes Operating system settings Virtual hard disk files The entire system
Operating system settings
Several users access the same shared printer in Lia's organization. A colleague tells her that the paper tray needs to be refilled. She uses the Printer menu to manage the print jobs and refill the paper tray. Which option do you think she would have chosen in the Printer menu if the documents within the print queue resumed printing after the refilling of the paper tray? Pause Printing Pause Restart Cancel All Documents
Pause Printing
While installing Print and Document Services, Laurel selects an option available under "Role Services." After the printer is configured, her colleagues can access the shared printer using a UNC. Which option do you think Laurel selected? LPD Service Shared Printer Print Server Internet Printing
Print Server
Reno is facing some DNS server issues that he is unable to resolve using nslookup, DNS manager, and other general methods. He decides to use information from the DNS Server log to identify the issue. However, the information that was logged is insufficient to resolve the issue. Reno is able to identify the issue after enabling debug logging. What should Reno do next? Reno should permanently enable debug logging. Reno should delete all the log files. Reno should flush the DNS server cache. Reno should turn off debug logging.
Reno should turn off debug logging.
Danielle creates a new scope, Sales LAN, for a DHCP server in her organization. She wants to assign an IP address to a printer in the sales department. Which of the following folders should Danielle use to configure this option? Address Leases Policies Address Pool Reservations
Reservations
Which of the following statements is true of SAN devices? SAN devices use hardware RAID externally to provide fault tolerance for the storage device that they contain. SAN devices use SAN protocols to manage and format filesystems. SAN devices are functionally like an external USB drive. SAN devices are the same as network-attached storage.
SAN devices are functionally like an external USB drive.
Identify the correct process that automatically adds SMB shared printers to computers that join a domain. Access the Advanced tab of the printer and select Auto deploy printer to client computers Select the printer within the Print Management tool, select More Actions, and choose Deploy with Group Policy from the Actions menu Access the Sharing tab of the printer and select the List in the directory option Select the printer within the Print Management tool and click Enable Branch Office Direct Printing
Select the printer within the Print Management tool, select More Actions, and choose Deploy with Group Policy from the Actions menu
Identify the option that can be used to create storage pools that include storage devices from different servers on a network. A combination of hard disks and SDDs Storage Spaces Direct The primordial storage pool A thin-provisioning virtual disk
Storage Spaces Direct
Which of the following tabs help configure the times that a printer is available to users, the printer priority, the printer driver, and spooling options? The Ports tab The Sharing tab The Advanced tab The Security tab
The Advanced tab
Lashonda sets up a DNS server, SERVER1, with a forward lookup zone called domainA.com. It hosts the resource records for the domainX.com Active Directory domain. It contains host (A) records for two network interfaces on SERVER1 (172.16.0.10 and 192.168.1.50). The host records are associated with the FQDNs server1.domainA.com and domainA.com. There is also an SOA record and an NS record for the zone. Which of the following records identifies SERVER1 as an authoritative DNS server? The A record for 172.16.0.10 The SOA record The A record for 192.168.1.50 The NS record
The NS record
Nadia uses the Disk Management tool to create a simple volume in one of the disks. She specifies the simple volume size and chooses a drive letter. While selecting the formatting options, she modifies the default allocation unit size. What will happen if the allocation unit size is large? The performance of database applications will decrease. The performance of file sharing applications will decrease. The performance of file sharing applications will increase. The performance of database applications will increase.
The performance of file sharing applications will increase.
Tuyet types the following statement into File Explorer: \\serverA\Share1. The NetBIOS name is resolved by a WINS server, and Tuyet is able to access the shared folder. After this interaction with the WINS server, Tuyet does not perform any other operations that requires her computer to interact with the WINS server for over a week. Which of the following is true of this scenario? Tuyet's computer's name record will be deleted from the WINS server. The WINS server will automatically shut down because of inactivity. The NetBIOS name is first broadcast over the LAN to all the computers. Tuyet is using a Windows XP computer or another legacy operating system.
Tuyet's computer's name record will be deleted from the WINS server.
Martha, a support technician, is troubleshooting a problem with a shared printer. All her colleagues, including Flavio, had complained that the printer control codes appear on printouts. She identifies corrupt print drivers as the cause of the problem. She reinstalls the print driver on Flavio's computer, and he does not face this problem again. However, other people in her company still face the issue. What should Martha have done to mitigate this issue for everyone? Turned the printer off and turned it on again Updated or reinstalled the printer driver on all the print clients individually Changed the location of the spool folder Updated or reinstalled the printer driver on the print server
Updated or reinstalled the printer driver on the print server
Which DHCP option number provides a default gateway router? a. 003 b. 004 c. 006 d. 015
a. 003
Which of the following spooling formats can be used by the GDI print API? (Choose all that apply.) a. EMF b. XPS c. RAW d. TEXT
a. EMF c. RAW d. TEXT
DHCP servers can be configured to dynamically update host and PTR records for legacy DHCP clients and DHCP clients that do not use a Microsoft operating system. a. True b. False
a. True
Parker runs the net start svsvc command at a Command Prompt to scan volume errors. He finds a corrupted spot on a volume. How can Parker directly go to the corrupted spot identified by the Spot Verifier service? By using the /x option with the chkdsk command By using the /c option with the chkdsk command By using the /r option with the chkdsk command By using the /spotfix option with the chkdsk command
By using the /spotfix option with the chkdsk command
Tara, an administrator, has added storage devices to the storage pool and selected the RAID level for the virtual disk using Server Manager. She wishes to allocate more space than is required for the current amount of data such that the system only uses the actual space it needs, enabling the actual size to grow with data. What would you do to achieve Tara's wish? Create several thick-provisioned virtual disks Create several fixed-provisioned virtual disks of combined capacity smaller than the storage pool Create several thin-provisioned virtual disks Create several virtual disks of combined capacity smaller than the storage pool
Create several thin-provisioned virtual disks
Pablo is a system administrator in training. He is trying to manually defragment the F: volume in Becky's system. Help Pablo identify the correct method to perform manual defragmentation. Right-click the volume, click Properties, highlight the Tools tab, and click the Check button. Write the "Optimize-Volume -DriveLetter" command in Windows PowerShell. Right-click the volume, click Properties, highlight the Tools tab, and click the Optimize button. Write the "Repair-Volume-DriveLetter F -Scan" command in Windows PowerShell.
Right-click the volume, click Properties, highlight the Tools tab, and click the Optimize button.
Christopher sets up multiple WINS servers in his organization and configures users' computers to use the WINS server. During testing, he attempts to access a folder called Share on the computer SERVERA. He enters the following statement into File Explorer: \\serverA\share. However, Christopher is unable to access the shared folder. What is the most likely reason for this issue? Christopher has not set up replication. The UNC syntax entered is incorrect and is missing arguments. SERVERA does not have a NetBIOS name record on any WINS server. The user computer is connect to the LAN but not to the Internet.
SERVERA does not have a NetBIOS name record on any WINS server.
Malia configures a primary zone on a DNS server to accept dynamic updates. Whenever a computer is added to the network, resource records for the computer are automatically created. For a computer, NX2001EY, Malia configures resource records manually. On the Zone Aging/Scavenging Properties window, she selects Scavenge stale resource records, sets the No-refresh interval to 14 days, and sets the Refresh interval to 14 days. She also enables automatic scavenging in the DNS server's properties. If Malia removes NX2001EY from the network, what is the most likely outcome in this scenario? All the resource records for N2001EY will be made available for scavenging after 28 days. Some of the resource records for N2001EY will be made available for scavenging after 28 days. The resource records for N2001EY will be deleted within 14 days. Malia will need to manually remove all the resource records for N20001EY.
Some of the resource records for N2001EY will be made available for scavenging after 28 days.
Shaw, a server administrator, uses an iSCSI SAN protocol to transfer data to and from SAN devices at a speed of up to 40 Gb/s. He configures one of the SAN devices to provide storage to Jasper's Windows Server 2019 system. What should Jasper configure in his system to be able to connect to the storage? MPIO HBA The iSCSI initiator The iSCSI target
The iSCSI target
A server rack containing data files, databases, web content, etc. is stored on an external SAN, which is connected to the Windows Server 2019 operating system via iSCSI. Which of the following is not likely to be achieved with this configuration? Providing storage to other servers Using hardware RAID externally to provide fault tolerance Connection to Fibre Channel SAN devices Accessing multiple SAN devices
Using hardware RAID externally to provide fault tolerance
You wish to provide access to Web resources in another organization. However, the associated A records for these resources are stored in a zone file on a DNS server in the other organization that is not publicly registered. What can you configure on your organization's DNS server to allow access to these resources? (Choose all that apply.) a. A stub zone that forwards requests to the other organization's DNS server b. A conditional forwarder that forwards requests to the other organization's DNS server c. A primary zone that copies resource records from the zone on the other organization's DNS server d. A secondary zone that copies resource records from the zone on the other organization's DNS server
a. A stub zone that forwards requests to the other organization's DNS server b. A conditional forwarder that forwards requests to the other organization's DNS server d. A secondary zone that copies resource records from the zone on the other organization's DNS server
Which of the following are print server configuration tasks that you normally perform before adding shared printers within the Print Management tool? (Choose all that apply.) a. Add manufacturer-supplied printer drivers for the print devices within your organization b. Add a PRINT$ shared folder c. Verify the ports and forms available on your print server, and add additional ones, if necessary d. Configure default printer and print server permissions
a. Add manufacturer-supplied printer drivers for the print devices within your organization c. Verify the ports and forms available on your print server, and add additional ones, if necessary d. Configure default printer and print server permissions
Which of the following are reasons for creating multiple volumes on a single storage device? (Choose all that apply.) a. Allow for the use of more than one type of filesystem b. Reduce the chance that filesystem corruption will render all data on the storage device unusable c. Segregate different types of data d. Speed up access to stored data by keeping filesystems as small as possible
a. Allow for the use of more than one type of filesystem b. Reduce the chance that filesystem corruption will render all data on the storage device unusable c. Segregate different types of data d. Speed up access to stored data by keeping filesystems as small as possible
Which two of the following tasks can you perform to provide fault tolerance for two DHCP servers in the DMZ? (Choose two answers.) a. Ensure that DHCP relay agents in the organization are configured with the IP address of both DHCP servers b. Ensure that half of the DHCP relay agents in the organization are configured with the IP address of the first DHCP server, and the other half are configured with the IP address of the second DHCP server c. Configure the two DHCP servers as replication partners d. Configure DHCP failover in either load balance or hot standby mode for all scopes
a. Ensure that DHCP relay agents in the organization are configured with the IP address of both DHCP servers d. Configure DHCP failover in either load balance or hot standby mode for all scopes
Which of the following are requirements for each server in a Storage Spaces Direct configuration? (Choose all that apply.) a. Failover Clustering feature installed b. 64 GB of memory and at least two processors c. At least six additional storage devices (two or more of which are SSDs) d. 10 Gb Ethernet interface with RDMA support
a. Failover Clustering feature installed c. At least six additional storage devices (two or more of which are SSDs) d. 10 Gb Ethernet interface with RDMA support
Which of the following statements regarding backup performance options for Windows Server Backup are true? (Choose all that apply.) a. Full backups provide the fastest restoration of data b. Incremental backups take less time to perform than full backups c. Up to 6 incremental backups can be performed following a full backup d. Full backups back up files that have the archive attribute set
a. Full backups provide the fastest restoration of data b. Incremental backups take less time to perform than full backups
Which of the following are optional components of a DHCP scope? a. IP address exclusions b. DHCP options c. DHCP policy d. Reservation
a. IP address exclusions b. DHCP options c. DHCP policy d. Reservation
What name format is used to specify the iSCSI initiators that are permitted to connect to an iSCSI target? a. IQN b. FQDN c. IDN d. UNC
a. IQN
Which two resource records can you create in a zone to provide the FQDN of an email server for the zone, as well as associate this FQDN with an IPv6 address? (Choose two answers.) a. MX b. A c. CNAME d. AAAA
a. MX d. AAAA
Which of the following are authoritative DNS server types? (Choose all that apply.) a. Primary b. Active Directory-integrated primary c. Secondary d. Caching-only
a. Primary b. Active Directory-integrated primary c. Secondary
You have submitted a print job to a shared printer that uses a different layout than is supported by the print device. After noticing that your print job was not printed, you open the print queue and see your print job with a Paused status. What action can you select from the Documents menu to ensure that the print job is printed, even if the layout is not ideal? a. Resume b. Unhold c. Restart d. Cancel
a. Resume
You notice that printouts from small print jobs are inserted within the printouts of large print jobs on a print device within your organization. What option can you select within printer properties to resolve the issue? a. Start printing after last page is spooled b. Hold mismatched documents c. Print directly to the printer d. Keep printed documents
a. Start printing after last page is spooled
A single user complains that their print job is printing garbled text on hundreds of pages on the printer. What are two possible causes of this issue? a. The user selected wrong document layout options within their software application when printing the document b. The printer driver has become corrupted on the print client c. The printer driver has become corrupted on the print server d. The shared printer is configured with an improper spooling format
a. The user selected wrong document layout options within their software application when printing the document b. The printer driver has become corrupted on the print client
Which of the following are valid reasons to deploy a WINS server? (Choose all that apply.) a. To reduce NetBIOS name broadcasts on LANs in an organization b. To allow computers in one LAN to resolve NetBIOS names in another LAN c. To resolve NetBIOS names to IPv6 addresses d. To provide legacy Windows clients access to an Active Directory domain
a. To reduce NetBIOS name broadcasts on LANs in an organization b. To allow computers in one LAN to resolve NetBIOS names in another LAN
After storage tiers have been enabled for the storage used by a volume, you can use the Set-FileStorageTier cmdlet in Windows PowerShell to ensure that a specific file is always stored on a specified storage tier. a. True b. False
a. True
By supplying the device driver for an FC HBA during a Windows Server 2019 installation, you can choose to install Windows Server 2019 on FC SAN storage instead of a local storage device. a. True b. False
a. True
If a DNS server does not contain a zone file that contains the resource records for a lookup, and is not configured as a conditional or default forwarder, it will use its root hints file to perform a recursive query. a. True b. False
a. True
NetBIOS name records are automatically created on a WINS server by computers that are configured to use the WINS server. a. True b. False
a. True
Scavenging can be configured to remove stale resource records that were added to a zone using dynamic update. a. True b. False
a. True
To prevent a DHCP server from leasing an IPv4 address that has been manually configured on a computer on the network, you can configure a DHCP server to send one or more ping requests to an IPv4 address before leasing it. a. True b. False
a. True
Windows 10 PCs can be configured to print directly to a network-attached print device, or to a shared printer on print server that prints directly to a network-attached print device. a. True b. False
a. True
What two items must you configure using Server Manager in order to share storage to other systems using iSCSI? a. iSCSI virtual disk b. clustered storage pool c. iSCSI target d. iSCSI initiator
a. iSCSI virtual disk c. iSCSI target
Which of the following settings within printer properties allows print device notifications to be sent to the print server? a. Enable printer pooling b. Enable bidirectional support c. Enable notifications and logs d. Allow printer notifications
b. Enable bidirectional support
DHCP servers respond to DHCPDISCOVER packets received from DHCP clients or DHCP relay agents with a DHCPACK packet. a. True b. False
b. False
Separator pages can be configured to reduce the cost of printing for an organization. a. True b. False
b. False
The default lease time of 8 days for a DHCP scope is appropriate for networks that primarily contain mobile devices, but should be reduce for networks that primarily contain desktop PCs. a. True b. False
b. False
To allow users within a branch office to print to a network-attached printer within a main office, you must enable Branch Office Direct Printing. a. True b. False
b. False
When you select the List in the directory option within printer properties, a shared printer object is created within the OU that you specify within Active Directory. a. True b. False
b. False
Windows computers contact their DNS server at boot time to create or update their host resource records. This feature is called zone transfer. a. True b. False
b. False
You can only run the chkdsk command on NTFS and ReFS filesystems. a. True b. False
b. False
You wish to configure a Windows Server 2019 print server using the Print Management tool to share printers using SMB and LPD. What components must you select when installing the Print and Document Service server role? (Choose all that apply.) a. Print Management b. Print Server c. LPD Service d. Internet Printing
b. Print Server c. LPD Service
When configuring the Storage Spaces component of Windows Server 2019 using Server Manager, which of the following statements is true? (Choose all that apply.) a. The primordial storage pool contains all storage devices on a system b. RAID volumes are created on a virtual disk that utilizes space in a storage pool comprised of storage devices c. Virtual disks implement a level of RAID and can use thin or thick provisioning d. The maximum number of storage devices that you can add to a single storage pool is 32
b. RAID volumes are created on a virtual disk that utilizes space in a storage pool comprised of storage devices c. Virtual disks implement a level of RAID and can use thin or thick provisioning
Another server administrator has configured an iSCSI SAN device to provide storage to your Windows Server 2019 system. What must you configure on your Windows Server 2019 system in order to connect to this storage? a. iSCSI HBA b. iSCSI initiator c. iSCSI target d. MPIO
b. iSCSI initiator
You wish to create a RAID level 5 volume using the Disk Management tool. How many storage devices can you use in the volume? a. 3 b. 7 c. 32 d. There is no limit.
c. 32
You have configured a new storage pool in Server Manager that contains 5 storage devices and would like to configure a single virtual disk that uses all of the available capacity from this pool. What RAID type should you select in the New Virtual Disk Wizard if you wish to ensure that your virtual disk remains fault tolerant in the event that two storage devices fail at the same time? a. Simple b. Striped c. Mirror d. Parity
c. Mirror
Several users are complaining that a particular printer is not printing their documents. What should be your first course of action? a. Restart the Print Spooler service on the print server b. Advise each user to restart the Print Spooler service on their print client and re-print their document c. View the Queue Status column for the printer within the Printers Not Ready custom filter within the Print Management console d. Update or replace the printer driver for the printer within the Print Management console
c. View the Queue Status column for the printer within the Printers Not Ready custom filter within the Print Management console
Your organization has two WINS servers to provide for NetBIOS name resolution. What can you do to ensure that each WINS server shares its NetBIOS name records with the other server? a. Configure WINS failover for the two WINS servers b. Provide the IP address of both WINS servers in IPv4 properties on each WINS client c. Configure the DNS server to use WINS lookup d. Configure the two servers as replication partners
d. Configure the two servers as replication partners
Which of the following formats can be used to print to a shared printer using IPP? a. servername:\sharedprintername b. servername:/sharedprintername c. \\servername\sharedprintername d. http://servername/printers/sharedprintername/.printer
d. http://servername/printers/sharedprintername/.printer