Collision Repair Review Questions

Technician A says that a four-wheel drive vehicle has two differentials. Technician B says that on a front-wheel drive vehicle, the rear wheels do nothing but steer. Who is right?

A only

Technician A says that a lubricant should be used with a trim removal air chisel attachment. Technician B says that a lubricant should be used with an eraser disc. Who is right?

A only

Technician A says that hazardous waste containers need to be kept closed except when being filled or emptied. Technician B says that an unlined steel drum is the appropriate type of container for story a corrosive waste. Who is right?

A only

Technician A says that hazardous waste disposed of into the soil, can cause air pollution. Technician B says that the disposal information is found in the product identification section of an SDS.

A only

Technician A says that hazardous waste storage areas may be outdoors. Technician B says that hazardous waste storage areas may have one floor drain. Who is right?

A only

Generally, torque wrenches should be calibrated at least once,

A year

Before beginning repairs, determine if there are any undamaged ______________________ panels that require complete or partial removal.

Adjacent

Which of these materials can be used to neutralize an acid spill?

Baking soda

The clear coat provides protection from fading for which of these?

Base coat

_____________________ tricks the eye to see one color.

Blending

Technician A says that a door check strap is used to hold a door open. Technician B says that a door check strap will prevent a door from opening too far. Who is right?

Both A and B

Technician A says that a door handle may be connected to the latch with steel linkages. Technician B says that the lock cylinder may be in the door handle. Who is right?

Both A and B

Technician A says that when removing a door mirror, it may be necessary to remove the interior door trim panel. Technician B says that door mirrors may be mounted to the vehicle with studs and nuts.

Both A and B

The parts of the seat belt assembly include a seat belt buckle, seat belt latch or tongue _____________ lower anchor and seat belt retractor

D-ring

To prevent accidental airbag deployment, disable the supplemental restraints system by:

Disconnecting the negative battery cable.

Adaptive cruise control (ACC) keeps the vehicle the desired ______________ between the ACC-equipped vehicle and the forward vehicle

Distance

Which of these coatings is applied by electrically charging the body and the coating with opposite charges?

E-coat

Rivets are typically used to attach high-mount stop lamps to the exterior of the vehicle.

False

Solvent-borne and waterborne paint wastes can be stored in the same container.

False

Spray-on sound deadeners should be applied to the top of the floor pan, directly over the catalytic converter.

False

Door adjustments on a door-mounted hinge included all of these EXCEPT

Forward or Rearward

Shims are typically used for ________________ adjustments.

Height

Child safety seats and booster seats can be removable or __________________ into the vehicle

Integrated

Seam dealers are chemical products designed to minimize moisture and air instruction wherever panels _________________.

Join

Anti-corrosion compound is a material sprayed on inside surfaces of parts that are subject to ___________________.

Moisture

According to the EPA guidelines, the amount of hazardous waste generated per month by a conditionally-exempt small quantity generator (CESQG) is:

No more than 220 lbs.

Masking is done before refinishing to protect areas from:

Overspray

Which of these is a purpose of a clear coat?

Provide high gloss

A flat washer:

Reduces stress

What does a condenser do?

Remove heat from refrigerant

Door handles can be attached to the door panel with studs and nuts, ________________ , bolts and retaining clips.

Rivet

When checking the opening and closing effort on a door, watch for the door dropping down or jumping up off the _________________?

Striker

Blending is done to:

Trick the eye to see another color

A pinch weld clamp anchors the vehicle in position by gripping the lower pinch weld of the vehicle in jaws that were tightened

True

A removed seat assembly may require recalibrating the occupant classification system (OCS)

True

A screw extractor is used on fasteners that are broken flush to the surface

True

Does the evaporator absorb heat from the passenger compartment?

True

Does the refrigerant change to the 3 different states of matter?

True

Hazardous waste containers should be kept closed except when being filled or emptied.

True

Left-hand threaded fasteners are typically found on parts that rotate

True

Plastic grommets may be used with metal fasteners

True

Replacement labels have their own part numbers.

True

Snap rings are used in transmissions to hold gears to shafts

True

Some exterior accessory kits include parts for both sides of the vehicle.

True

The welding torch is commonly referred to as the welding gun or/and torch

True

There are many tools that can be used to pull or hold a vehicle

True

With fixtures systems an in damaged vehicle will properly set onto fixtures

True

The first step when replacing a part is to:

Verify that the part is correct for the application

Which of these is used to reduce noise, vibration, and leaks?

Weathering stripping

Hazardous waste containers should be inspected:

Weekly

A gap is the _____________ of the opening between panels.

Width

The seat position sensor detects the distance the seat is from the front airbags. A vehicle may have this sensor on BOTH the driver seat and the front passenger seat. This is the most common occupant position sensor. Is this statement true?

Yes