Collision Repair Review Questions
Technician A says that a four-wheel drive vehicle has two differentials. Technician B says that on a front-wheel drive vehicle, the rear wheels do nothing but steer. Who is right?
A only
Technician A says that a lubricant should be used with a trim removal air chisel attachment. Technician B says that a lubricant should be used with an eraser disc. Who is right?
A only
Technician A says that hazardous waste containers need to be kept closed except when being filled or emptied. Technician B says that an unlined steel drum is the appropriate type of container for story a corrosive waste. Who is right?
A only
Technician A says that hazardous waste disposed of into the soil, can cause air pollution. Technician B says that the disposal information is found in the product identification section of an SDS.
A only
Technician A says that hazardous waste storage areas may be outdoors. Technician B says that hazardous waste storage areas may have one floor drain. Who is right?
A only
Generally, torque wrenches should be calibrated at least once,
A year
Before beginning repairs, determine if there are any undamaged ______________________ panels that require complete or partial removal.
Adjacent
Which of these materials can be used to neutralize an acid spill?
Baking soda
The clear coat provides protection from fading for which of these?
Base coat
_____________________ tricks the eye to see one color.
Blending
Technician A says that a door check strap is used to hold a door open. Technician B says that a door check strap will prevent a door from opening too far. Who is right?
Both A and B
Technician A says that a door handle may be connected to the latch with steel linkages. Technician B says that the lock cylinder may be in the door handle. Who is right?
Both A and B
Technician A says that when removing a door mirror, it may be necessary to remove the interior door trim panel. Technician B says that door mirrors may be mounted to the vehicle with studs and nuts.
Both A and B
The parts of the seat belt assembly include a seat belt buckle, seat belt latch or tongue _____________ lower anchor and seat belt retractor
D-ring
To prevent accidental airbag deployment, disable the supplemental restraints system by:
Disconnecting the negative battery cable.
Adaptive cruise control (ACC) keeps the vehicle the desired ______________ between the ACC-equipped vehicle and the forward vehicle
Distance
Which of these coatings is applied by electrically charging the body and the coating with opposite charges?
E-coat
Rivets are typically used to attach high-mount stop lamps to the exterior of the vehicle.
False
Solvent-borne and waterborne paint wastes can be stored in the same container.
False
Spray-on sound deadeners should be applied to the top of the floor pan, directly over the catalytic converter.
False
Door adjustments on a door-mounted hinge included all of these EXCEPT
Forward or Rearward
Shims are typically used for ________________ adjustments.
Height
Child safety seats and booster seats can be removable or __________________ into the vehicle
Integrated
Seam dealers are chemical products designed to minimize moisture and air instruction wherever panels _________________.
Join
Anti-corrosion compound is a material sprayed on inside surfaces of parts that are subject to ___________________.
Moisture
According to the EPA guidelines, the amount of hazardous waste generated per month by a conditionally-exempt small quantity generator (CESQG) is:
No more than 220 lbs.
Masking is done before refinishing to protect areas from:
Overspray
Which of these is a purpose of a clear coat?
Provide high gloss
A flat washer:
Reduces stress
What does a condenser do?
Remove heat from refrigerant
Door handles can be attached to the door panel with studs and nuts, ________________ , bolts and retaining clips.
Rivet
When checking the opening and closing effort on a door, watch for the door dropping down or jumping up off the _________________?
Striker
Blending is done to:
Trick the eye to see another color
A pinch weld clamp anchors the vehicle in position by gripping the lower pinch weld of the vehicle in jaws that were tightened
True
A removed seat assembly may require recalibrating the occupant classification system (OCS)
True
A screw extractor is used on fasteners that are broken flush to the surface
True
Does the evaporator absorb heat from the passenger compartment?
True
Does the refrigerant change to the 3 different states of matter?
True
Hazardous waste containers should be kept closed except when being filled or emptied.
True
Left-hand threaded fasteners are typically found on parts that rotate
True
Plastic grommets may be used with metal fasteners
True
Replacement labels have their own part numbers.
True
Snap rings are used in transmissions to hold gears to shafts
True
Some exterior accessory kits include parts for both sides of the vehicle.
True
The welding torch is commonly referred to as the welding gun or/and torch
True
There are many tools that can be used to pull or hold a vehicle
True
With fixtures systems an in damaged vehicle will properly set onto fixtures
True
The first step when replacing a part is to:
Verify that the part is correct for the application
Which of these is used to reduce noise, vibration, and leaks?
Weathering stripping
Hazardous waste containers should be inspected:
Weekly
A gap is the _____________ of the opening between panels.
Width
The seat position sensor detects the distance the seat is from the front airbags. A vehicle may have this sensor on BOTH the driver seat and the front passenger seat. This is the most common occupant position sensor. Is this statement true?
Yes