Midterm Architectural Drawing

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

contour line

A line connecting points that have the same elevation.

split-level

A(n) _______ house is a good example of a house style that requires both a foundation plan and a basement plan.

steep

A(n) _________ slope is indicated when contours are placed close together.

sum

Always verify the dimensions by adding all the partial dimensions together. Their overall should equal the overall dimension.

modifications

Because ____________ are frequently required as other plans are developed, however, the floor plan may not be finished until near the end of the design process.

green

Color that represents vegetation on topographical drawings.

blue

Color that represents water (streams, lakes, marshes, ponds) on topographical drawings.

less

Considering the cost per square foot, a basement costs much _________ than the first floor.

right

Contours cross watersheds and ridges at ______ angles.

different

Contours of _______ elevations do not touch.

basements

Houses in cold climates usually have ____________ because the footings must be below the frost line, which may be several feet deep.

benchmark

Identified with a special symbol on a plot plan when a property corner begins or ends here.

identify

If the symbol is not a standard one, __________ it.

landscape plan

Illustrates the type and placement of trees, shrubs, flowers, gardens, and pools on the site.

topographical features

Include trees, ground cover, railroad tracks, sewer lines, fences, water, and sand.

center

Interior frame walls should be dimensioned to their _______ on a basement/foundation plan

meridian arrow

Known as the north symbol

property lines

Lines that define the site boundaries

B

Ms. Smith and Mr. Jones are each building a house from the same floor plan. Ms. Smith is using a stud wall with siding and Mr. Jones is using brick veneer. Which of the following statements is true? A. The size of the foundations will be exactly the same. B. Mr. Jones's foundations will be 8" longer and wider than Ms. Smith's because a brick veneer house needs a 4" ledge on all four sides. C. Ms. Smith's foundation plan will be 4" longer and wider than Mr. Jones's because a stud wall requires a 4" ledge on the length and width. D. None of the above.

edge

Openings in a masonry wall are dimensioned to the _______ of the opening/

plot plan

Plan view drawing that shows the site and location of buildings on the property.

D

Prior to drawing the foundation plan, you should: A. Study available information to make a decision about the size of the footings and foundation walls. B. Determine the frost penetration depth for the area where the dwelling will be built. C. Check with local building codes to be sure that the requirements will be met. D. All of the above.

engineer's

Property line lengths are measured with a(n) _______ scale to the nearest 1/100 foot.

bearings

Recorded in degrees - sometimes including minutes and seconds- from either north or south

closed contour lines

Represent summits and depressions.

estimated contours

Represented by a short dashed line similar to a hidden line.

1"=30'-0"

Scales commonly used in drawing plot plans range from 1/8"=1'-0" to _________.

plot

Study the elevation and _______ plan to determine if retaining walls, stepped footings, or other grade considerations are needed.

hidden

The ________ linetype is used for drawing the footings for foundation walls.

floor plan, plot plan, and elevations

The foundation plan is drawn from which sources of information

masons

The foundation plan is prepared primarily for excavators, _____, carpenters, and cement workers who build the foundation.

floor

The foundation plan is usually drawn after the _____ plan and elevations have been roughed out.

columns

The foundation plan shows the location and size of footings, piers, _____, foundation walls, and supporting beams.

surveyor

The plot plan is drawn from information recorded on a site plan which is supplied by a(n) _______.

1/4"=1'-0"

The scale most commonly used in residential drawings is ______.

contour interval

The vertical distance between two adjacent contours.

outside

To dimension the location of the house on the site, dimension the distance from the _____ of the exterior wall to the property line.

D

What is the last step when drawing a foundation or basement plan using CADD? A. Add text to the drawing. B. Add the title of the drawing. C. Determine the plot scale. D. Look over the plan to be sure it is complete.

even

When contours are smooth and parallel, the ground surface is ______.

overhang

When the distance between the house and property line is critical, the _______ of the roof should be shown on the drawing.

A

Which of the following is a difference when drawing a foundation or basement plan with CADD as compared to manual drafting? A. The drawing is created at full scale. B. The floor plan is not used. C. Dimensions are not needed as the drawing is so accurate it can be scaled. D. None of the above.

relative

_______ elevations are usually acceptable in residential home construction.

contour

_________ lines help describe the topography of a site by depicting the shape and elevation of the land.

irregular

____________ contours indicate rough and uneven ground surface.

hatch patterns

another name for material symbols

overall dimensions

are necessary to provide the total length and width of the structure.

foundation details

describes the foundation structure

expansion floor plans

floor plans that take future expansion into account during the initial design stage

floor plan

identifies the location and dimensions of exterior and interior walls, windows, doors, major appliances, cabinets, fireplaces, stairs, and other fixed features of the house

dwarf walls

low walls constructed to retain an embankment or excavation

windows or doors

openings in the foundation walls

material symbols

used instead of words to describe the materials being specified

concrete block symbol

used on a drawing to shade concrete block foundation walls

material symbols

used on drawings to represent various building materials

soil bearing test

verifies the load bearing capacity of the soil


Set pelajaran terkait

Certmaster Learn for A+ Core 1 (Exam 220-1001)

View Set

CHAPTER 1 THE BASIC OF NUTRITION

View Set

6 - North American Cultural Landscape

View Set

PSY521 Physiological Psychology: Exam 2

View Set

Sociology, CHAPTER 15: POPULATIONS, CITIES, AND THE ENVIRONMENT

View Set

Populations in Research Requiring Additional Considerations and/or Protections

View Set