MODULE 4 REVIEWS
125
25 = ____ c
0.57
6.85 inches converted to its decimal equivalent in feet is ____. b
88'5 5/8"
88.47 feet converted into the nearest sixteenth of an inch is ___. c
1/2" 10" E-C ell
A nominal 1/2-inch pipe that is 10 inches long from the end to the center of an ell is abbreviated as ____. c
0.1875
Converted to a decimal, 3/16 equals ____. a
614.65 pounds
If cast-iron pipe weighs 4.75 pounds per foot, 129.4 feet weighs ____. a
28.8
If tubing costs $4.20 per foot and you pay a total of $120.95, the total feet of tubing you have purchased is ___. c
148
If you have a length of pipe measuring 1,780 inches, you can cut ___ 12-inch pieces. b
40"
In an installation, two 1-inch threaded tees need to be connected. The center-to-center measurement is 42 inches. The end-to-end dimension required for the pipe is ___. b
fitting allowance
The distance from the end of the pipe that goes into the fitting to the center of the fitting is ___. d
thread makeup
The distance that a pipe screws into a fitting is called the ______. b
21 7/8"
The end-to-end dimension required for a 1 1/2-inch threaded pipe between tow tees with a face-to-face length of 18 7/8 inches is __.
29"
The end-to-end dimension required for a 1/2-inch threaded pipe between two tees with an end-to-center length of 29 inches is ___. d
center point
The extensions of the centerline of the pipe and the centerline of the fitting intersect inside the fitting to create a __. c
measure the depth of the fitting's socket or thread
The most convenient way to determine thread makeup is to _____. a
24
What is the common denominator for 2/6 and 3/8? ___ d
9,557.75
You already have 2,032.25 pounds of bricks. If you buy 7,525.5 more pounds, the total pounds of bricks you will have is ___. c
13'
You have lengths of tube that are 2.8', 4.2' and 6' long. The total length of tubing is __. b
40 1/8"
You need to cut a threaded steel pipe to connect two 3/4-inch threaded tees. The center-to-center measurement is 41 7/8 inches. The end-to-end dimension required for this pipe is ___. b
14"
You need to cut a threaded steel pipe to fill a space between two 3/4-inch threaded tees. The center-to-center measurement between the two fittings is 15 3/4 inches. Referring to figure 9, the end-to-end dimension required for this pipe is ___. e