Module 7

7-5) You wish to create a RAID level 5 volume using the Disk Management tool. How many storage devices can you use in the volume?

32

7-10) Which of the following are requirements for each server in a Storage Spaces Direct configuration? (Choose all that apply.)

At least six additional storage devices (two or more of which are SSDs) Failover Clustering feature installed 10 Gb Ethernet interface with RDMA support

7-16) You can only run the chkdsk command on NTFS and ReFS filesystems. True or False?

False

7-2) On systems that have a UEFI BIOS, the UEFI system partition is the boot partition. True or False?

False

7-7) When creating a RAID volume using Server Manager, each storage device is automatically converted to a dynamic disk. True or False?

False

7-19) Which of the following statements regarding backup performance options for Windows Server Backup are true? (Choose all that apply.)

Full backups provide the fastest restoration of data Incremental backups take less time to perform than full backups

7-15) What name format is used to specify the iSCSI initiators that are permitted to connect to an iSCSI target?

IQN

7-9) You have configured a new storage pool in Server Manager that contains 5 storage devices and would like to configure a single virtual disk that uses all of the available capacity from this pool. What RAID type should you select in the New Virtual Disk Wizard if you wish to ensure that your virtual disk remains fault tolerant in the event that two storage devices fail at the same time?

Mirror

7-6) After noticing a RAID level 5 volume in Disk Management with a status of Failed Redundancy, you located and replaced the failed storage device with a new one. What must you do to return the volume status to Healthy?

Right-click the RAID volume, click Repair Volume, and select the new storage device

7-3) Which of the following are reasons for creating multiple volumes on a single storage device? (Choose all that apply.)

Speed up access to stored data by keeping filesystems as small as possible Allow for the use of more than one type of filesystem Segregate different types of data Reduce the chance that filesystem corruption will render all data on the storage device unusable

7-17) Which service can be started on a system to reduce the amount of time it takes to repair filesystem errors?

Spot Verifier

7-11) After storage tiers have been enabled for the storage used by a volume, you can use the Set-FileStorageTier cmdlet in Windows PowerShell to ensure that a specific file is always stored on a specified storage tier. True or False?

True

7-13) By supplying the device driver for an FC HBA during a Windows Server 2019 installation, you can choose to install Windows Server 2019 on FC SAN storage instead of a local storage device. True or False?

True

7-18) When you click the Optimize button for a simple volume in the Optimize Drives window, the underlying storage device is defragmented if it is a hard disk, or trimmed if it is an SSD. True or False?

True

7-20) When restoring a backup, you can choose to restore the data to a different location. True or False?

True

7-4) When initializing a new storage device that has a capacity larger than 2 TB, you must use a GPT instead of an MBR. True or False?

True

7-8) When configuring the Storage Spaces component of Windows Server 2019 using Server Manager, which of the following statements is true? (Choose all that apply.)

Virtual disks implement a level of RAID and can use thin or thick provisioning RAID volumes are created on a virtual disk that utilizes space in a storage pool comprised of storage devices

7-12) Another server administrator has configured an iSCSI SAN device to provide storage to your Windows Server 2019 system. What must you configure on your Windows Server 2019 system in order to connect to this storage?

iSCSI initiator

7-14) What two items must you configure using Server Manager in order to share storage to other systems using iSCSI?

iSCSI virtual disk iSCSI target

7-1) Which of the following RAID volume types provide fault tolerance in the event of a single storage device failure? (Choose all that apply.)

striping with parity mirroring