osha 30 module 14 personal protective equipment

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

Eye and face protection must be stamped _____ to indicate that the ppe meets this specification for the design. A. ansi 87.1 B. Astm 4000 C. osha 29cfr D. none

A. ansi 87.1

for hot work a leather apron is generally recommended what hand and arm ppe are generally recommended

leather gloves or gauntlets

The _________ is most often the best source of information regarding chemical protective gloves

manufacturer or supplier

this material is sometimes used for the soles of non slip footwear

neoprene

Electricians should wear ______ hand and arm protection meeting ansi spec

rubber

Engineering controls are more preferred than ppe for controlling exposure to hazards

true

individual states may enforce standards that are not identical to federal requirements

true

Hearing protection is worn to

A minimize the frequency and intensity of noise

Head protection must meet _____ specifications and be so labeled. A. ansi B. niosh c. msha D. bus

A. ansi

A bureau of labor statistics survey found that most workers who suffered impact head injuries were A. not wearing head protection B. wearing head protection incorrectly C. working with object that were to heavy D. none of the above

A. not wearing head protection

It is important to inspect head protection for signs of dents cracks penetration or any other damage, if damage is found A. report the damage and get the hard hat replaced B. place stickers on the damaged area C. paint the damaged area D. all of the above

A. report the damage and get the hard hat replaced

Flying particles cause the greatest number of eye injury cases A. true B. False

A. true

The water temperature for an emergency eye wash should be tepid in the range of 60-100 A. true b. false

A. true

injuries to arm and hands include

All of the above

which of the following is not one of the 4 primary classes eye and face protection? A. safety spectacles B. Goggles C. bump glass D. face protection E. welding shields

C bump glass

Eye injury may result from A. flying particles B. chemical exposure c. injurious light rays D. all of the above

D. all of the above

ppe is A. referred to as ppe B. Designed to create a barrier against workplace hazards C. less preferred than engineering controls D. all of the above

D. all of the above

which of the following is a reason for wearing a respirator

D. both a and b

which statement is incorrect with respect to damaged ppe A. damaged ppe must not be used B. Damaged ppe should be tagged as defective and removed C. Damaged ppe should be repaired or discarded immediately D. damaged ppe should be used until non damaged ppe can be obtained

D. damaged ppe should be used until non damaged ppe can be obtained

which statement is incorrect with respect to ppe A. pie does not eliminate the hazard B. if ppl equipment fails, exposure will occur C. Equipment must be properly fitted and maintained D. ppe is the preferred method of hazard control

D. ppe is the preferred method of hazard control

Which of the following is true owith respect to atmosphere supplying respirator

E. all of the above

eye wash stations should be located A. on the same level as the hazard B. in a well lit area that is properly marked C. within 10 seconds from the hazard D. along a path free of obstructions E. all of the above

E. all of the above

typical foot injury is caused by objects falling fewer than 4 feet with a median weight of about 65 lbs

True

Air purifying respirators can only be worn when there is

a. sufficient oxygen to support life

When the eyes or the bodies of workers may be exposed to corrosive materials OSHA requires a facility that will provide emergency flushing or drenching A. true B. false

a. true

safety footwear should have

all of the above

these are worn where there are sparks molten metal splashes why have elastic sides or quick release

b foundry boots

Emergency eye wash and shower station must be installed A. on the same level as the hazard B. along a travel path free from obstructions C. both a and b D. none of the above

c both a and b

Which is not one of the four basic types of earring protection

c rolled cotton balls

Some one whose body is exposed to injurious chemicals should flush the exposed part for A. 15 seconds B. 1 minute C. 15 minutes D. Flushing is not necessary

c. 15 minutes

which class of protective hard hat offers protection from high voltage A. class A B. classC C. class E D. class G

c. Class E

These are worn to protect the entire face from flying particles metal sparks or chemical splashes A. chemical goggles B. safety spectacles with side shields C. face shield with ansi approved safety spectacles D. both a and b

c. Face shield with ansi approved safety spectacles.

Head Protection must be A. inexpensive and eye catching B. color coded by occupation and be visible C. resistant to penetration and be able to absorb the shock of a blow D. all of the above

c. resistant to penetration and be able to absorb the shock of a blow.


Set pelajaran terkait

NCLEX 1 Pretest Mistakes Saunders

View Set

week 9 Pharmacology (ATI) Musculoskeletal System

View Set

OB _ Practice HESI Exam _ Gestational Diabetes _ Case Study _ 2023

View Set

Review (Ratio, Rates, Percentages)

View Set

Art 206 (Chap 1 Unit Exam 1 Prep)

View Set

Lippincott NCLEX Review - Addison's Disease

View Set

Structure and Functions of Government

View Set