simple machines, Work 6.1, 6.2 & 6.3

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

What is a wedge?

is an inclined plan with one or two sloping sides.

What is eficeincy?

is the measure of work put into a machine is changed into useful output work by the machine

So more input work is changed to?

useful output work.

In which of the following situation is work being done? A. Person shovels snow off a sidewilk B. A worker lifts bricks, one at a time, from the ground to the back of a truck. C. a roofer's assistant carries a bundle of shingles across a construction site.

B. A worker lifts bricks, one at a time, from the ground to the back of a truck

How is energy transfered?

ENERGY is always transferred from the object that is DOING WORK to the one that has it WORK DONE.

How is Efficiency measured?

Efficeiency= Output work/input work x 100

Name one machine that you used in the past week. How did this machine make doing work easier for you?

Electric toothbrush Made brushing my teeth faster

What is energy?

Energy is the ability to do work.

Explain how the scientific definition of work is different from the everyday meaning.

Everyday: anything that involves effort Scientific: same direction as the applied force

Give an example of an machine.

Example: Knives, scissors, door knobs

Find the force needed to lift a 2,000 N weight using a machine with a mechanical advantage of 15.

F(in) = F (out)/MA 133 N

What is the formula for work ?

FORMULA: Work(W)= Force (F)x Distance (D)

Infer how lubricating a machine affects the output force exerted by the machine.

Friction is a force that opposes the motion of two surfaces sliding past each other. Lubrication a machine increases the output force because it decreases friction.

When is there no work?

If the direction of applied force and direction of motion match the work is done. If they don't match the work is NOT being done.

Describe the circumstances for which the output work would equal the input work in a machine.

If there is no friction

Explain why in a real machine the output work is always less than the input work.

In a real machine, some of the input work is converted into thermal energy by friction.

How could you increase the IMA of an inclined plane?

Increase its length

What is a machine?

Is a device that makes work easier Machines can be simple

Infer how lubricating a machine affects the output force (& work) exerted by the machine.

Reduces friction greater output

Why is the output work always less than the input work for a real machine?

Some of the input work is converted to thermal energy by friction

The mechanical advantage of a machine is less than one. Compare the distances over which the input and output forces are applied.

The distance over which the output force is applied is greater than the distance that the input force is applied.

Simple machines make work easier by increasing what?

The distance over which work has been done.

What is an output?

The force applied by the machine is called the OUTPUT

What is an input?

The force that is applied is called the INPUT

Describe the circumstances for which the output work would equal the input work in a machine?

The machine would have to be an ideal machine in which there was no friction.

Explain why, in a real machine, output work is always less than input work.

The output work is always less because of thermal energy which create friction. The friction slows down the work and that is why the input is more than the output.

fulcrum

the set point on a lever

What is the Ideal Mechanical Advantage of a screwdriver with a shaft radius of 3mm and a handle radius of 10mm?

.3mm

How do machines make work easier?

1. Machines can make work easier by increasing the distance over which the force is applied. 2. Machines can also make work easier by changing the direction of the applied force.

What is the Ideal Mechanical Advantage of a car's steering wheel if the wheel has a diameter of 40cm and the shaft its attached to has a diameter of 4cm?

10 cm

Find the force needed to lift a 2000 N weight using a machine with a MA of 15.

133.33N

Calculate the MA of a hammer if the Force in is 125 N and the Forceout is 2000 N.

16

What is your power if you do 900 J of work and it took 5 secounds?

180 J/s

Calculate Efficieny: Find the efficiency of a machine that does 800 J of work if the input work is 2,400 J.

33.33%

Find the efficiency of a machine that does 800 J of work if the Win is 2400 J.

33.33%

Calculate: find the force a person exerts in pulling a wagon 20m if 1,500 J of work is done.

75 Newtons

Find the force a person exerts in pulling a wagon 20 m if 1500 J of work is done.

75J

How does a ramp make lifting an object easier?

Less force is needed to lift an object when using a ramp

What is the formula for M.A.?

M.A.= output/Input

Calculate the mechanical advantage of a hammer if the input force is 125 N and the output force is 2,000 N.

MA=F (out)/F (in) MA= 16

How do you make work easier?

Machines can make work easier by increasing the force that can be applied to an object.

Name two things in your life that require work (physics). Name two things in your life that require power (the rate at which work is done).

Me moving a chair. Moving a desk Chromebook & phone

What is mechanical advantage?

Mechanical advantage is the ratio of output force to the input force of the machine

Is work being done when... A roofers assistant carries a bundle of shingles across a construction site.

No

ONE Joule= ?

One Newton Meter

What two condtions needed for work?

One is that the applied force must make the object move The movement must be in the same direction as the applied force.

What is power?

Power is the amount of work being done in one SECOND It is a rate, the rate at which work is DONE

Power Equation

Power= energy transfered divided by time

Describe a situation in which a force is applied but no work is done.

Pushing against an unmovable wall

Think Critically: The mechanical advantage of a machine is less than one. Why is this a bad machine?

This means there is less input force and even less output force. The machine barely has any MA which makes it like the same as doing it without the machine. You are doing more than the machine Output force is always greater than the input force

True or False Because energy can't be created or destroyed, the output work can't be greater than the input work

True

What is an Input and output?

Two forces that are involved when a machine is used to do work

What is Power measured in?

Watts

Classify a screwdriver being used to turn a screw as one of the six types of simple machines.

Wheel and Axle

Label the parts of a bicycle that are simple machines.

Wheel: wheel and axle Petals/chains: pulley Handlebars: lever Gears Brakes levers Screws

How is work and energy related?

When work is done a transfer of energy occurs

What is inclined plane?

is a sloping surface, such as a ramp, that reduces the amount of force required to do work

What is a screw?

is an inclined plane wrapped in a spiral around a cylindrical post.

Power

is the amount of work done in one second

Work equation

Work = applied force times distance

Explain how work and energy are related.

Work is the transfer of Energy

Is work being done when... A worker lifts bricks, one at a time, from the ground to the back of a truck.

Yes

Is work being done when... a. A person shovels snow off a sidewalk.

Yes, because they are lifting the snow and moving the snow.

lever

a bar that moves around a set point

What is a simple machine?

a machine does not reduce work just makes it easier

Find the efficiency of a machine that does 800 J of work if the input work is 2,400 J.

eff= W (out)/W (in) x 100% 33%

What is output force?

force applied by the machine

What is input force?

force that is applied to the machine

What is a lever?

is a bar that is free to pivot or turn around a fixed point

What is a Machine

is a device that makes doing work easier

What is a pulley?

is a grooved wheel with a rope, chain, or cable running along the groove.

What is efficiency?

is a measure of how much of the work put into a machine is changed into useful output work by the maching

What is a wheel and axle?

is a simple machine consisting of a shaft or axle attached to the center of a larger wheel, so that the machine may rotate.

A machine with more high efficiency produces?

less heat from friction

What are the 6 types of simple machines?

lever, pulley, wheel and axle, inclined plane, screw, and wedge

Define Work

the energy transferred when a force makes an object move over a distance.

first class lever

the fulcrum is in the middle of the lever


Set pelajaran terkait

SIE 8 Securities Exchange Act of 1934 and the Secondary Markets

View Set

Technology and its Effects on Modern America

View Set