Solidprofessor quiz 4

Which feature would you most likely use to create the holes shown in the image?

Circular Pattern

Which check box in the Circular Pattern PropertyManager is selected to evenly distribute the holes as you increase the number of instances using the spinbox?

Equal Spacing

Additional Reference Geometry such as user created reference planes must reference the default top, left and right planes.

False

The Shell Feature can only be used to create shells with a uniform thickness. Any walls that you want to give different thicknesses to will need to have material added or removed afterward.

False

2. Which option needs to be selected from the Revolve Type drop-down list to revolve the sketch symmetrically on both sides of the sketching plane?

Mid Plane

This feature is an example of a(n) ______.

Revolved Boss

To create the geometry shown in the image, where each wall has equal thickness, in the fewest number of mouse clicks, use the _____ Feature.

Shell

. If there is an existing centerline in a sketch, like the one in the sketch shown, then SOLIDWORKS will automatically pre-select it as the axis of revolution of a Revolved feature regardless of its position or orientation.

True

A temporary axis is automatically created by SOLIDWORKS for any part that has a circular edge or face.

True

If you create a Shell Feature without selecting any face to be removed, the resultant model will be a closed thin-walled model. For example, the solid cube shown would become a hollow cube.

True

True or False: A Chamfer can be applied to an edge, face, or vertex.

True

True or False: It is possible to add material to a part using a Chamfer feature.

True

When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.

True

You can create a Shell Feature without clicking on any faces to be removed and leaving the selection box in the Shell PropertyManager blank.

True

You can create a plane at an offset distance by selecting a plane or a planar face as the reference.

True

The design intent of this part requires that the sketched circle be vertically aligned to the origin. Does the image shown indicate that this design intent has been achieved? Yes/no

Yes

Which check box is selected to make sure that only the original hole is patterned in the second direction and not the patterned holes?

fix

Which of the following can NOT be edited in the rib property manager?

fix