test 1 - 3

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

What would you use to enable multiple PCs to share a monitor? (A) Bridge (B) Router (C) KVM (D) Wireless keyboard

(C) KVM A KVM (which stands for keyboard, video, and mouse) enables you to share a single monitor and set of inputs among several computers. They're used extensively in computer repair shops. Incorrect answers reasons: A router connects two networks together. A network bridge combines two distinct networks into one larger network. A wireless keyboard won't help you use share a monitor among PCs.

Danerys needs high-powered but perfectly quiet cooling for a HTPC she's building. What's her best option? (A) Thermal Paste (B) Additional fans (C) Liquid based (D) Side panel slots

(C) Liquid based Liquid cooling is both powerful and quiet. Perfect for a home theater PC! Incorrect answers reasons: Side panel slots help with cooling, but they're definitely not a complete solution. Fans are a bad choice for a home theater environment, since they can create distracting noise. Thermal paste is necessary for cooling, but you can't cool a PC with just thermal paste.

Which of the following authentication protocols is unique to DSL? (A) VPN (B) PPP (C) PPPoE (D) WPA

(C) PPPoE DSL connections use the PPPoE authentication protocol. Incorrect answers reasons: Dial-up networking uses the PPP protocol. WPA is a wireless encryption standard. VPN uses authentication and encryption, but not PPPoE.

A newly assembled PC is giving beep codes at boot, but you don't recognize the code. Which of the following would be the best places to look first. (Select two.) (A) Hard Drive (B) CPU (C) RAM (D) Video Card

(C) RAM (D) Video Card Almost all POST beeps on modern PCs point to either the video card or RAM. Incorrect answers reasons: Without a working CPU, you won't even get POST errors. There are no beep codes for hard drives.

What is the best way to determine the total capacity and specific type of RAM your system can handle? (A) Check the system utility in the Control panel (B) Check the Device manager (C) Open the case and inspect the RAM (D) Check the motherboard book

(D) Check the motherboard book The best way to determine the total capacity and specific type of RAM your system can handle is to check the motherboard book. Incorrect answers reasons: The other answers won't tell you the total capacity or specific type of RAM your system can handle.

Which of the following is a typical Class C address? (A) 192.168.1.100 (B) 169.254.0.1 (C) 10.12.14.5 (D) 172.16.5.100

192.168.1.100 is a typical private Class C address. Incorrect answers reasons: 169.254.0.1 is an Automatic Private IP Addressing (APIPA) address. 172.16.5.100 is a private Class B address. 10.12.14.5 is a private Class A address.

Amy's office wants to upgrade their intranet web server. The pricing for the software they use is based on motherboard sockets. Which of the following CPU and motherboard combinations offers the best performance at the best price? (A) A single-processor motherboard with eight hyperthreaded cores (B) A single-processor motherboard with eight threaded cores (C) A dual processor motherboard with six overclocked cores each (D) A dual processor motherboard with ten overclocked cores each

(A) A single-processor motherboard with eight hyperthreaded cores A single-processor motherboard with eight hyperthreaded cores will provide excellent performance and minimum costs. Incorrect answers reasons: A single-processor motherboard with eight threaded cores doesn't make a lot of sense. All CPUs process threads. A dual-processor motherboard with six overclocked cores would provide good performance, but would cost more than a single-processor solution. A dual-processor motherboard with ten overclocked cores would provide good performance, but would cost more than a single-processor solution.

A customer needs to create a copy of a database on media, however the file is 89GB. Which of the following format specifications can support the file size? (A) BDXL (B) BD - RE DL (C) BD - RE (D) BD - R

(A) BDXL Conventional Blu-ray technology has a capacity of 50GB. BDXL supports 100 GB and 128 GB disks through triple and quadruple layer disks. Incorrect answers reasons: BD-RE DL will not support the file size. BD-RE will not support the file size. BD-R will not support the file size

Anytime you hear either a scraping noise or a high-pitched squeal coming from your system, the first item to consider is: (A) Bad hard drive (B) Bad power supply (C) Bad DVD drive (D) Bad fan

(A) Bad hard drive Bad hard drive. These two sounds indicate a hard drive that will soon crash. Make a backup of critical data. Incorrect answers reasons: Anything that rotates inside your computer is capable of making these sounds. However, given the gravity of the situation if your hard drive fails, you should assume the hard drive first and take action to save your data.

Which of the following UTP cables can be used as a 1000BaseT cable? (A) CAT 5e (B) CAT 5 (C) CAT 3 (D) Cat 1

(A) CAT 5e CAT 5e is the only cable listed that can handle 1000-Mbps data transfer rates. CAT 6 is preferable. Incorrect answers reasons: CAT 1 is a standard phone line. CAT 3 can handle up to 10 Mbps on Ethernet networks. CAT 5 can handle up to 100 Mbps. Note: Once upon a time there was a network access method called Token Ring. It was a competitorto Ethernet technology back in the 90's. Token Ring used CAT 3 and could achieve transfer speeds up to 16 Mbps.

A mobile phone is responding slowly and erratically for a user. The user has tried a soft reset on the device, but the phone continues to respond slowly. Which of the following is the BEST step the user can take to fix this problem? (A) Close applications that are unused (B) Reset to factory default (C) Turn off your location services (D) Change your power settings

(A) Close applications that are unused Close the unused apps is the best answer. Many people do not realize that the amount of applications that are running in the background on your mobile device. If you have performance issues, try reviewing the applications that are running on your system, and close applications that are not being used. Incorrect answers reasons: Power settings will not assist, they are designed to help the battery life of a device. Resetting the tablet may fix the problem, however, you will lose all your data. This problem does not require drastic measures. Turning off location services will not assist. It may help your battery, but it would not affect your response time.

A technician is dispatched to a user's home to secure a wireless network. The SOHO user has only one system to connect wirelessly, yet wishes to protect her Wi-Fi network from unauthorized use. Which of the following will best meet the user's requirements? (A) Configure the router to allow access by specific MAC addresses (B) Configure the network to utilize a proxy (C) Configure the use of DHCP (D) Configure the use of static IP addresses

(A) Configure the router to allow access by specific MAC addresses MAC filtering enables you to select which computers you want to allow on to the network based on their MAC addresses. In this case, only one system needs to connect, so that's the one you should allow. Incorrect answers reasons: Using DHCP won't prevent unauthorized computers from connecting. DHCP just hands out IP addresses automatically. Static IP addresses won't help, either. Using a proxy just makes your computer connect to the Internet through an intermediary server.

In a TCP/IP network, what device enables a computer to contact systems outside the local network? (A) Default gateway (B) DNS (C) Switch (D) Hub

(A) Default gateway The default gateway enables systems on a LAN to contact systems outside the local network. Incorrect answers reasons: A Domain Name Server (DNS) translates names into IP addresses, and is used inside the LAN as well as outside. Hubs and switches are not default gateways.

A company has a printer that currently has network access. They would like the group of users to be able to access the printer. Which of the following connection types is the BEST to achieve the access? (A) Ethernet (B) eSATA (C) USB (D) Serial

(A) Ethernet Ethernet networking can easily provide device sharing and it is currently configured with their network. Incorrect answers reasons: Serial cabling could work, but the printer already has network access. USB cabling could work, but the printer already has network access. eSata is not a valid connection for a printer.

Under outdoor conditions, the 802.11g standard supports data throughput of up to _______________ and has a range of up to _______________. (A) 11 Mbps / 140 meters (B) 54 Mbps / 140 meters (C) 11 Mbps / 120 meters (D) 54 Mbps / 250 meters

(B) 54 Mbps / 140 meters Under ideal, outdoor conditions, the 802.11g standard supports data throughput of up to 54 Mbps and has a range of up to 140 meters. Incorrect answers reasons: 802.11b has a data throughput of 11 Mbps at 140 meters. 802.11a has a data throughput of 54 Mbps at 120 meters. 802.11n has a data throught of 150+ Mbps at 250 meters.

What voltages does an ATX12V P1 connector provide for the motherboard? (A) 3.3 V, 12 V (B) 3.3 V, 5 V, 12V (C) 3.3 V, 5V (D) 5V, 12V

(B) 3.3 V, 5 V, 12V An ATX12V P1 connector provides 3.3 V, 5 V, and 12 V of power to the motherboard. Incorrect answers reasons: 4-pin Molex connectors provide 5 V and 12 V of power. AUX connectors provide 3.3 V and 5 V of power.

Which of the following form factors dominates the PC industry? (A) CTX (B) ATX (C) AT (D) BTX

(B) ATX ATX is by far the dominant form factor. Incorrect answers reasons: AT was ATX's predecessor. BTX was an alternate form factor developed to enable better cooling, but it never caught on. CTX is not an actual form factor (yet).

A laser printer keeps getting a MEM OVERFLOW error. Which of the following would most likely fix the problem while still maintaining quality? (A) Reduce the RET (B) Reduce the print resolution (C) Add more RAM to the printer (D) Replace the printer's RAM

Add more RAM to the printer. Incorrect Answers: Reduce the RET. This might help, but it'll reduce the quality of your printouts and isn't the best solution available. Replace the printer's RAM. There's nothing wrong with the RAM; there is just not enough of it. Reduce the print resolution. This might help, but it's not the best solution since now you are reducing the quality of your printouts.

What do you plug into a three-row, 15-pin port? (A) VGA Monitor (B) Joystick (C) Mouse (D) Keyboard

(A) VGA Monitor You plug a monitor into a three-row, 15-pin port. Incorrect answers reasons: A joystick uses a two-row, 15-pin port. Keyboards and mice use round, mini-DIN connectors or USB.

Scott's excited that his new laptop has a Gigabit Ethernet (1000BaseT) capable NIC. However, when he plugs it into his network at the office, he only gets 100Mbit speeds. What's the problem? (A) His switch only supports 100BaseT (B) The other computers on the network only support 100BaseT (C) He needs to update the NIC's drivers (D) He needs to set the NIC's speed settings to "AUTO"

(A) His switch only supports 100BaseT His switch only supports 100BaseT. When two Ethernet devices connect, they negotiate in order to set themselves to the highest possible speed. In this case, the switch is 100BaseT. Incorrect answers: The drivers are fine. Your NIC's speed has nothing to do with the other computers. However, your actual data throughput will depend on the speed of the entire connection between the two communicating devices. Most NICs do have a property that defines the speed. In almost all cases this is set by default to "AUTO." There is a tiny chance that Scott's NIC is set to 100BaseT, but it's not nearly as common as the correct answer.

John's laptop won't recharge and he suspects the AC adapter is the problem. Which tool should he use to test it? (A) Multimeter (B) Power supply tester (C) Paper clip (D) Induction toner

(A) Multimeter Use a multimeter to test the AC adapter's output voltage. Incorrect answers reasons: An induction toner enables you to locate specific network cables, often inside a wiring closet. A power supply tester enables you to test a power supply when it's not plugged into a computer—a handy device, but not for testing an AC adapter. While you might be successful testing with a paper clip, it's probably not a good idea!

An 802.11g wireless card would be great, however, Jim wants to be able to go anywhere. That includes the middle of the park if he wants. (A) NFC (B) USB (C) IR (D) Wifi

(A) NFC Near field communication (NFC) protocols are designed for just such sharing. Used over wireless communication, it allows for data exchange for distances of 4 centimeters or less. Incorrect answers reasons: Infrared (IR) will require software. WiFi will require that they are connected to a common network. USB will require cabling.

Which of the following resources is most important for accessing remote virtual environments on a client machine? (A) Network speed (B) Drive space (C) CPU speed (D) High - speed memory

(A) Network speed Network speed is critical for accessing anything remotely. The faster the network, the faster the access. Incorrect answers reasons: The other answers would be great for locally hosted virtual environments, but not for remotely hosted ones.

There are only two issues that take place on a modern PC that generate beep codes. What are they? (Select two.) (A) No video card detected (B) BIOS needs updating (C) Bad or missing RAM (D) Problem with CPU

(A) No video card detected (C) Bad or missing RAM The only two common POST beep codes are: No video card detected and Bad or Missing RAM. Incorrect answers reasons: If the CPU is bad, then the POST can't start. There is no error code for an outdated BIOS.

A user wants to configure a smartphone to save all attachments from an Outlook.com email to a cloud-based service. Which of the following would be the BEST to use to accomplish this? (A) One Drive (B) iCloud (C) Google Drive (D) FTP

(A) One Drive OneDrive is a file hosting service that allows you to sync files and later access them from your devices or from a web browser. OneDrive is the file hosting service defaulted for Microsoft devices. Incorrect answers reasons: Google drive is a cloud based sync service, but designed for use with Gmail. iCloud is a cloud based sync service, but designed for use with Apple products. FTP is a network protocol used to transfer computer files between a client and server.

A user has a new web email account and asks a technician for help with setting up email on a tablet. The user would like for the email to only be stored on this tablet. Which of the following email server setting types would the technician use to accomplish this task? (A) POP3 (B) IMAP (C) S/MIME (D) SMTP

(A) POP3 POP3 is correct. POP3 protocol was designed to download your email to an inbox on your local system, so email are available when you are not connected to the internet. Incorrect answers reasons: IMAP protocol was designed to leave your email on a message server, so they can be accessed from multiple locations, until deleted by the user. S/MIME is a standard for public key encryption. SMTP is the protocol used for sending email.

Which of the following supports IP telephony devices without requiring external power? (A) PoE (B) QoS (C) VPN (D) WEP

(A) PoE Power over Ethernet (or PoE) enables networking devices to get their power through an Ethernet cable rather than a power cord. Incorrect answers reasons: A VPN, or virtual private network, is used to enable remote connections to a local network. QoS, or quality of service, is a method for maintaining stable network performance by prioritizing some network packets over others. WEP is an encryption standard for wireless networks.

Which of the following tools would be used to connect CAT5e cabling to a patch panel? (A) Punch down (B) Tone probe (C) Loopback plugs (D) Crimper

(A) Punch down A punch down tool presses the individual strands of wire into a patch panel. Incorrect answers reasons: A tone probe helps network techs find the port to which a particular Ethernet cord is attached. Loopback plugs help test a NIC. A crimper is used to attach RJ-45 plugs to an Ethernet cable.

A user calls telling you the printer is prompting for "Load Legal" but the user has no interest in printing on legal paper. What should you do? (A) Show the user how to set the print job for letter paper (B) Direct the user to a true letter sized printer on the network (C) Tell the user to restart the printer (D) Tell the user to load some legal paper anyway

(A) Show the user how to set the print job for letter paper The user is configuring their application to print on legal paper. Show them how to set it up to request letter paper. Incorrect answers reasons: The other answers will not solve the problem.

In order for a digitizer to work properly upon installation, which of the following is required? (A) The digitizer must be calibrated (B) The digitizer needs to be connected to the internet (C) the digitizer must be cleaned (D) The digitizer requires the latest software updates

(A) The digitizer must be calibrated A digitizer transfers all of the touch function from the device to the LCD. When installed, the digitizer requires calibration so it can determine, when the screen is touched, where to signal the operating system the location of the touch on its grid. Incorrect answers reasons: Digitizers do not require internet connection. Digitizers do not require maintanence cleaning. Digitizers do not require an update.

When troubleshooting a VoIP telephone connection, the line connected to the telephone is MOST likely which of the following cable types? (A) HDMI cable (B) CAT6 cable (C) CAT3 cable (D) Single-mode fiber (E) USB cable

(B) CAT6 cable VoIP phones use an IP ethernet network, such as the internet, to provide telephone service; so, it uses a network connection. CAT6 is the most common cable used in VoIP. Incorrect answers reasons: CAT 3 cable can support power over ethernet, however, it usually has difficulty providing the required bandwidth for VoIP USB cannot be used for VoIP; it is used for peripherals. Single-mode fiber is used in fiber optics. HDMI cables are used for video/audio connections.

The IP address 3.4.15.124 is an example of which of the following class licenses? (A) Class C (B) Class A (C) Class D (D) Class B

(B) Class A This is a Class A address. The Class A first octet is from 1 to 126. Incorrect answers reasons: The Class B first octet is from 128 to 191. The Class C first octet is from 192 to 223. The Class D first octet is from 224 to 239.

On a laptop, the keystroke combination used to switch to an external monitor almost always includes the _____ key. (A) Windows (B) Fn (C) Alt (D) Ctrl

(B) Fn Virtually all laptops require you to use a key combination including the FN (Function) key along with a second key. Incorrect answers reasons: The Ctrl, Windows, and Alt keys do not control monitor output.

A user complains because the social media apps on his mobile device always note his location. The user is worried about privacy, and would like to keep this information from being broadcast on his social media. Which of the following features should the user adjust in order to accomplish this? (A) Tehtering (B) Geotracking (C) Filtering (D) WiFI

(B) Geotracking Geotracking can be turned off. Many apps are able to use GPS enabled mobile devices to identify a person's physical location. Mobile devices often have this feature within their camera app. This setting can be easily changed on your mobile device, to not leave your location. Incorrect answers reasons: Filtering is not a correct answer.Filtering refers to removing unwanted features of a signal. Turning off WiFi will not assist, as the GPS is still active. Tethering is a way to use a device as a hotspot to share an internet connection, it will not assist the user.

The image on a customer's laptop is very dim, with only the outline visible. What can cause this problem? (Select two.) (A) CRT (B) Inverter (C) Plasma Screen (D) LCD (E) OLED

(B) Inverter (D) LCD If the LCD's inverter fails, the backlights can't get any power, causing the image to be so dim as to look almost black. Incorrect answers reasons: Laptops don't use plasma screens or CRTs, since they are heavy and bulky. OLED screens are very uncommon and don't require a backlight. They either work or they don't; the picture won't get dim from an error.

What does the "chassis intrusion detection" BIOS option do? (A) It sends an e-mail to the system administrator (B) It logs that the chasis (case) has been opened (C) It triggers a system shutdown and locks the drives (D) It triggers an alarm

(B) It logs that the chasis (case) has been opened It logs that the chassis (case) has been opened. Incorrect answers reasons: The other answers are not anything the BIOS is capable of doing on a system.

Windows printers may have extra driver versions installed if you desire—what good is this feature? (A) It speeds up network printing (B) It's for different versions of Windows (C) It enables Linux PC's to print (D) It's for different XP Service packs

(B) It's for different versions of Windows Installing multiple drivers supports systems on your network using other versions of Windows such. Incorrect answers reasons: The other answers are not true and are incorrect.

A technician obtains a maintenance kit that contains a fuser, transfer roller, and pickup rollers to perform maintenance on a printer. What type of printer will they be maintaining? (A) Impact (B) Laser (C) Thermal (D) Inkjet

(B) Laser The transfer roller is used to transfer the image created in toner to the paper. A laser printer is the only printer that will use toner to create the image on paper. Incorrect answers reasons: Impact printing does not use a transfer roller. Thermal printing does not use a transfer roller. Inkjet printing does not use a transfer roller

Which of the following allows a user to pinch zoom on an Android device? (A) Micro USB port (B) Multi-touch (C) A trackball (D) Accelerometer

(B) Multi-touch Multi-touch - Multi-touch enables mobile devices to recognize input from more than one finger at a time. Incorrect answers reasons: An accelerometer helps keep track of a device's orientation in space. A Micro USB port enables mobile devices to connect to a PC. A trackball is an input device that uses a small ball to move a cursor, kind of like a mouse.

A retail-boxed CPU usually comes with a ________ fan. (A) Overdrive (B) OEM (C) Large (D) Specialized

(B) OEM The fans that come with retail-boxed CPUs are known as Original Equipment Manufacturer (OEM) fans. Incorrect answers reasons: The other answers are aftermarket fans that are designed when using the CPU beyond its normal intent. Manufacturers provide a fan that will support normal usage on a CPU.

Dual Channel is a feature unique to: (A) Video (B) RAM (C) Audio (D) Network connections

(B) RAM DDR/DDR2/DDR3 RAM can be used with special Dual Channel motherboards. Incorrect answers reasons: The other answers do not have Dual Channel anything.

Tommy sent a print job to his printer, but then he realized the printer was out of paper. He adds paper, but the print job does not automatically print. He opens the Print queue and sees his print job shows an error. He right-clicks on the print job and a menu appears. What does he need to select in this menu to get the print job on its way to the printer? (A) Pause (B) Restart (C) Open (D) Start

(B) Restart You would press the Restart option. Incorrect answers reasons: Neither Open nor Start are valid options for a print job menu. Pause is a valid option, but it simply pauses a print job. It does not restart a print job.

Thermal printers have a major disadvantage compared to other printer technologies: thermal printing __________ . (A) Costs much more in terms of consumables (B) Is limited to 16 colors (C) Is unsuitable for archival purposes (D) Is far too slow for most functions

(C) Is unsuitable for archival purposes Thermal paper is sensitive to heat, making it unsuitable for archival printing. Incorrect answers reasons: Thermal printing uses one color, not 16, nor is it too slow. Its cost is not its main disadvantage, either.

A technician receives a report from a client that is having issues with colors on a monitor. The technician notices that the monitor does not appear to have any red hues. The technician sees that the monitor has two types of inputs. VGA is currently in use, and the HDMI cable is not. The technician powers down the system and switches from using the VGA cable to the HDMI cable and the issue is resolved. Which of the following was MOST likely the issue? (A) The monitor did not support VGA (B) The VGA cable had damaged pins (C) HDMI was the original display configuration (D) The video card drivers need to be updated

(B) The VGA cable had damaged pins Since the HDMI cable resolved the issue, the cable was damaged. Incorrect answers reasons: Display configuration will adjust when a new type is connected. The VGA cable had already been in use. Since the cable resolved the issue, the drivers were not outdated.

Mike's newly configured computer (using manual IP settings) can't access a Web site by its fully-qualified domain name (FQDN), but he can access it by the Web site's IP address. Everyone else on the network can access the site by the FQDN. Which of the following is the MOST likely problem? (A) The computer's DNS Client service is disabled (B) The computer's DNS settings are incorrect (C) The computer does not have DNS permissions enabled on the default gateway (D) The computer's DNS server is down

(B) The computer's DNS settings are incorrect Your DNS settings are incorrect. Given that most systems use DHCP, it's rare to have a problem like this, but if you typed in invalid manual DNS settings into your NIC's Properties, this can happen. Incorrect answers reasons: If you were to turn off the DNS Client service on your computer, you would get this problem. However, there is a much smaller chance that this service would be disabled than that someone had entered an invalid DNS service IP address. In a single network, everyone USUALLY uses the same DNS server, so if the DNS server is down for you, it's down for everyone else. Granted, you might have a different DNS server, so this answer is valid, but not as valid as entering an invalid DNS server IP address. Routers don't have an item in their Access Control Lists called "DNS permissions". You COULD block DNS from getting through your router by blocking port 53 (DNS), but then no one could get DNS access. Most routers have the ability to block a port number for a single IP or MAC address, but, again, it's simply too unlikely.

Bill returns from vacation, plugs in his laptop to charge, and preps for dinner. The dog bumps the table with the laptop and the laptop hits the floor. Bill checks for any obvious damage, such as a cracked screen, but sees nothing. He leaves the laptop on the charger over night and goes to work the next day. His laptop won't come up at all, even when it's plugged in. What's most likely the problem? (A) The fall damaged the power brick (B) The fall damaged the DC jack (C) The fall damaged the hard drive (D) The fall damaged the battery

(B) The fall damaged the DC jack The fall damaged the DC jack, rendering both the charging process and the plugged in failure. Incorrect answers reasons: The fall damaged the battery. This would have resulted in a very spectacular fire. The fall damaged the power brick. The laptop fell, not the power brick. The fall damaged the hard drive. In such a scenario, the computer would still have turned on, but would have been unable to access the OS.

A user describes a loud clicking noise coming from their system, and are unable to boot their computer to the operating system. The technician determines the loud clicking noise to be from the hard drive. What is MOST likely creating the noise? (A) Solid State read/write head scratching the platter surface (B) The motion of the read/write head armature parallel to the platter (C) Your system attempting to connect to the drive (D) Bad spindle motor bearings

(B) The motion of the read/write head armature parallel to the platter Traditional hard drives use platters that spin and use read/write heads on actuator arms to read the top and bottom of the platters. The arms are controlled by a servo motor. All these moving metal parts can wear down over time and break. Incorrect answers reasons: Your system uses electronic signal and no audible sound occurs. Solid state drives do not use moving parts. The hard drive does not have spindle motor bearings.

You are troubleshooting a laptop that was just recently diagnosed with trouble holding power. When you turn the laptop on to troubleshoot, you notice that even while connected to the AC power adapter, the laptop will still use battery power. What could be causing something like this to happen? (Choose two.) (A) The battery is incompatible with the laptop (B) The power adapter that plugs into the wall is malfunctioning (C) You have selected a power scheme in your OS that disables charging (D) The LCD's power inverter is malfunctioning (E) The internal power circuity on the motherboard is faulty

(B) The power adapter that plugs into the wall is malfunctioning (E) The internal power circuity on the motherboard is faulty The internal power circuity and the power adapter are the two pieces to this mystery that need to be checked out. Either one could be at fault, or worse... both! Incorrect answers reasons: If the LCD's power inverter was malfunctionng, we would have a working laptop, we just wouldn't see anything on the laptop's screen. There is no power scheme in your OS that will disable battery charging. The battery being incompatible with system is unlikely. Laptops always come with a battery when purchased. Batteries are also very proprietary to the unit they are meant for.

Your new office networked printer is having trouble. You set the IP address to 192.168.4.3. It self-tests just fine and everything is properly configured, but no one can print to it. When you try to PING the printer, you don't get a response. All computers can access the server and the Internet—you even PING the router at 192.168.41.1 and it responds nicely. What should you now suspect? (A) The subnet mask for the entire network (B) The printer's IP address (C) The network switch (D) The printer's NIC

(B) The printer's IP address The printer's IP address looks like it is not in the same network as the rest of the PCs—certainly worth checking next! Incorrect answers reasons: The network switch is not the problem if you can still access the server and Internet. The printer's NIC is probably not the issue if it can self-test okay. The network's subnet mask is not the issue if the server and Internet can be accessed.

Martha's inkjet printer's output has the bottom of every letter missing in text and strange horizontal lines evenly spaced in her images. What part of the inkjet should she check for problems? (A) The paper take-up rollers (B) The printhead (C) The photosensitive drum (D) The printer's resolution

(B) The printhead Missing lines of horizontal print always points to a problem with the printhead. Incorrect answers reasons: The paper is being printed on, so it's not the take-up rollers. Inkjet printers do not have photosensitive drums. The printer resolution is not at fault, either.

You are installing a new video card in a PC. What is the most reliable place to get the most up-to-date driver? (A) The installation disc that came with your new video card (B) the manufacture's Web site (C) The Windows driver library on the OS installation disc (D) The default PnP driver

(B) the manufacture's Web site The best place to find the most up-to-date driver is the manufacturer's Web site. Incorrect answers reasons: Drivers may change after the card is made and shipped, so the installation disc is a no-go. Windows has a good library of drivers, but they will not be as up-to-date as the manufacturer's latest drivers. Any default driver is just a very basic driver designed for the lowest common denominator; such a driver will never be the most-up-to date.

How many devices can you attach to a single serial ATA controller? (A) 2 (B) 64 (C) 1 (D) 8

(C) 1 Only one drive device can connect to a single SATA controller. Incorrect answers reasons: The other answers just aren't true, and are incorrect.

Which port should be blocked on a server to block remote logins? (A) 53 (B) 443 (C) 21 (D) 80

(C) 21 21. FTP uses port 21. Incorrect answers reasons: DNS uses port 53. HTTP uses port 80 by default. HTTPS uses port 443 by default

What is the minimum capacity of a DVD? (A) 650 MB (B) 7.34 GB (C) 4.37 GB (D) 3.47 GB

(C) 4.37 GB The minimum capacity of a DVD is 4.37 GB. Incorrect answers reasons: 650 MB is the minimum capacity of a CD. 3.47 GB has nothing to do with DVD capacity and is made up. 7.34 GB is close to the capacity of a single-sided, dual-layer DVD, which is actually 7.95 GB.

Which of the following wireless standards uses MIMO? (A) 802.11b (B) 802.11g (C) 802.11n (D) 802.11a

(C) 802.11n Multiple-input and multiple-output is the use of multiple antennas at both the transmitter and receiver to improve communication performance. This is a huge part of how 802.11n is able to achieve its theoretical bandwidth of 600 Mbps. Incorrect answers reasons: 802.11a, 802.11b, and 802.11g do not make use of MIMO technology.

Jim wants to be able to access his favorite website wirelessly with his new laptop, from anywhere. Which of the following would be the BEST choice for him to install/configure? (A) 802.11g wireless card (B) Bluetooth card (C) Cellular card (D) Infared card

(C) Cellular card A cellular card would allow Jim to be in any location he would like and not have to worry about wires. Unless there's no cellular signal. Sorry, Montana! Incorrect answers reasons: Bluetooth and Infared are known for their ability to connect devices wirelessly in short ranges, but not for internet connections. An 802.11g wireless card would be great, however, Jim wants to be able to go anywhere. That includes the middle of the park if he wants.

A user is connected to his personal mobile hotspot device at a library for internet access. He notices the display shows two connections, instead of just one. Which of the following actions will prevent only unauthorized access to the device immediately? (Select TWO). (A) Use the hot spot to access the intruder's device (B) Utilize a WiFi analyzer to identify the intruding device (C) Change the SSID's broadcast name (D) Turn off the hotspot and try later to see if the intruder has left (E) Add the intruding device to a blocked access list

(C) Change the SSID's broadcast name (E) Add the intruding device to a blocked access list It is best to block the device from your access list, but you can also prevent the connection by changing the SSID. Changing the SSID will also cause the intruder's system to lose the connection, but you will need to be certain the intruder does not connect to the new SSID. Incorrect answers reasons: Using the hot spot to access the intruder's device will not prevent them for the accessing your device. Turning off the hotspot will immedately stop the intruder, however, it also prevents your access. Utilizing a WiFi analyzer to identify the intruder will not prevent the unauthorized access.

A Windows system is unable to connect to the network. A ping loopback test verifies that the network card is working. What is your next step in troubleshooting the problem? (A) Run IPCONFIG (B) Install the driver for the network card (C) Check to see if the link light on the NIC is on (D) Verify that the switch is working properly

(C) Check to see if the link light on the NIC is on The next step is to check for connectivity. Look at the link light on the NIC to see that it is on, indicating a good connection to the hub or switch. Incorrect answers reasons: The other options might be helpful, but they are not your next step.

A company is working on making the office more environmentally friendly, and would like to reduce the amount of paper consumed on a multi-function printer. What setting can be utilized to achieve this outcome? (A) Economy ink (B) Collate (C) Duplex (D) Orientation

(C) Duplex Duplexing is the only option that will allow you to reduce the amount of paper during a print job. It allows for printing on the front and back of the page, which can cut paper consumption in half. Incorrect answers reasons: The orientation (portrait or landscape) will not always allow less paper usage. Collate papers only sets them in proper order in multipage jobs. Economy ink will only save your ink cost, it will not save paper.

What is the best way to toggle between a laptop's screen and an external monitor? (A) Task Manager (B) Display settings in Control Panel (C) Function keys on keyboard (D) Turn the monitors on and off

(C) Function keys on keyboard The function keys on the keyboard enable users to do things like change the brightness and contrast of the screen, change the speaker volume, and toggle to an external monitor. Incorrect answers reasons: Task Manager enables you to end unresponsive processes, start and stop services, and check your computer's performance. The display settings won't enable you to toggle a monitor on or off. Turning the monitor on and off won't do anything if the PC isn't outputing any video to it.

Paul wants to clean his LCD monitor and he's holding the proper solution and a lint-free rag in his hand. How does he apply the cleaner? (A) He should spray the cleaner on the top part of the monitor and wipe downward (B) He should saturate the rag with cleaner (C) He should spray the cleaner lightly on the rag (D) He should apply a plight spray evenly across the monitor

(C) He should spray the cleaner lightly on the rag Spray the cleaner lightly on the rag. Incorrect answers reasons: Cleaning solutions should never be sprayed directly on the screen, nor should you saturate the rag.

Jose is upgrading the memory on his laptop. The laptop has two slots for RAM, but one of them is currently being occupied. He has checked the qualified vendor list to ensure compatibility. After installing the new stick of RAM, the BIOS reports the original amount of memory. What should Jose do NEXT? (A) Check your Virtual memory settings (B) Check for any patches of Microsoft's website (C) Reseat the new stick of RAM (D) Replace all of the RAM

(C) Reseat the new stick of RAM Reseat the RAM. In a situation like this, when you know the RAM is compatible, the first thing you should do is simply try again. Maybe it wasn't inserted all the way. Incorrect answers reasons: Replacing all the RAM won't do any good. You know that the original stick works perfectly. Checking Windows Update won't fix a RAM installation issue. And your virtual memory settings are an operating system concern.

A technician is called onsite to solve a network connection error. Upon arrival, the technician observes a message on the screen stating there is no boot drive found. Which of the following steps should the technician take next? (A) Inform the customer the hard drive has crashed and replace the drive (B) Restart the system, booting from a system recovery disc (C) Restart the system to verify the proper boot sequence (D) Repair the boot sector using recovery console

(C) Restart the system to verify the proper boot sequence The first thing to do after a boot error is to make sure the boot sequence is correct. Incorrect answers reasons: You can use the recovery console to repair the boot sector on a drive, but if the drive isn't showing up at all, the recovery console won't help much. A system recovery disc won't help a boot device show up. Don't just replace the drive straight away. There may still be hope!

A technician needs to configure her neighbor's iPad. The neighbor wants to access his work e-mail. The technician requires some information from her neighbor's work IT department. Which of the following information does the technician need? (A) IP address and DNS (B) Server and gateway (C) Server and domain (D) IP address and domain

(C) Server and domain Incorrect answers reasons: You don't need to know IP address info, domain info, or DNS info to set this up.

Steve adds a second 1-GB 240-pin DIMM to his PC, which should bring the total RAM in the system up to 2 GB. The PC has an Intel Core 2 Duo 3-GHz processor and three 240-pin DIMM slots on the motherboard. When he turns on the PC, however, only 1 GB of RAM shows up during the RAM count. Which of the following is most likely to be the problem? (A) The motherboard can use only one RAM slot at a time (B) Steve put DDR SDRAM in a DDR2 slot (C) Steve failed to seat the RAM properly (D) The CPU cannot handle the 2GB of ram

(C) Steve failed to seat the RAM properly Steve failed to seat the RAM properly. Incorrect answers reasons: Different types of RAM are keyed differently, with different amounts of pins as well. It would be difficult to place a DDR stick in a DDR2 slot. The CPU can handle 2 GB of RAM. The motherboard can use more than one RAM slot at a time.

A company has a network printer that is utilzed by several departments. Although the printer shows online and other departments can access the printer, the accounting group is unable to print to this network printer. Which of the following would the technician use to resolve the problem? (A) Replace the network cable on the printer (B) The printer needs a maintenance kit replaced (C) The security settings for the print spooler need to be modified to include the department (D) The TCP/IP print spooler service needs to be restarted

(C) The security settings for the print spooler need to be modified to include the department Since other departments are accessing the print spooler without difficulty, the department that is having the problem does not have the proper permissions to use the print spooler. Incorrect answers reasons: The printer is working for other departments; no maintenance is needed. Other departments are accessing the print spooler without difficulty; the spooler is working properly. Other departments are accessing the printer properly; the cable does not need replaced.

What component can you not typically upgrade on a laptop? (A) RAM (B) Hard Drive (C) Video card (D) Wireless card

(C) Video card It's not possible to upgrade video cards in most laptops. Incorrect answers reasons: You can upgrade hard drives, RAM, or wireless cards in most laptops.

Harry thinks his AC adapter may not be charging the battery properly. What is the very first item he should check? (A) Whether the power up function key is toggled (B) Whether the battery is good (C) Whether the AC adapter's LED is on (D) Whether the laptop is set of for reach mode in Device Manager

(C) Whether the AC adapter's LED is on The first thing to check to verify that an AC adapter is working is the LED on the adapter itself. Incorrect answers reasons: Checking whether the battery is working or not is a good idea, too, but checking the AC adapter LED is a better choice. the other answers are made up

You are trying to connecting your laptop to your new 52" LED TV using an HDMI connector. When you connect everything, you immediately noticed that you get video on the screen, but there is no sound. What is the MOST likely cause of this? (A) You need to install a third-party application (B) The speakers in your TV are not compatible (C) You need to select HDMI audio on your laptop (D) The HDMI cable you installed doesn't meet specification

(C) You need to select HDMI audio on your laptop Go to the Sound applet in the Control Panel and ensure your sound card is using the HDMI to output sound. You probably just need to select or enable it. Incorrect answers reasons: Speakers are speakers. They don't care if it's a digital signal or an analog signal. As long as you have the right connectors, you'll be good to go. You don't need a third party application to take advantage of HDMI. All HDMI cables can send video and audio over the same cable.

What is the maximum throughput of a SATA II drive? (A) 4 Gbps (B) 1.5 Gbps (C) 1 Gbps (D) 3 Gbps

(D) 3 Gbps SATA II runs at 3 Gbps. Technically, the name of the technology is SATA Revision 2.x or SATA 3Gb/s, not SATA II. Incorrect answers reasons: First generation SATA runs at 1.5 Gb. The other two answers are made up

Which of the following explains why a tablets boot more quickly than most laptops? (A) A tablet requires less power to operate than a laptop (B) A SATA drive loads data much faster than an IDE drive (C) A tablet has a smaller circuit board than a laptop (D) A SSD drive loads data much faster than a SATA drive

(D) A SSD drive loads data much faster than a SATA drive A SSD drive loads data much faster than a SATA drive.- Since tablets use SSDs for mass storage instead of platter-based hard drives, they load the OS much more quickly. Incorrect answers reasons: The other answers are made up.

When choosing a home theater computer, what are the BEST features to include? (Select TWO). (A) Liquid Cooling (B) VGA output (C) Dual monitors (D) Digital audio (E) HDMI Output (F) NFC Capability

(D) Digital audio (E) HDMI Output Home theaters focus on the audio and visual in your television, movies, games and music. HDMI gives the best audio and video output. Incorrect answers reasons: Home theaters do not push the processor's ability to the point of requiring extensive cooling. VGA output does not offer as high a quality as HDMI output. Dual monitors are not necessary, as a home theaters generally have a large screen for viewing. Near field communication is generally utilized for mobile pay devices.

Which of the following memory features allows for protection against random inconsistencies in the transfer of data? (A) Low latency (B) Single Channel (C) Dual Channel (D) ECC

(D) ECC Error correcting code RAM detects and corrects any data errors that it may encounter. Incorrect answers reasons: Latency is a measurement of RAM's speed. Dual-channel is a feature that means that installing two identical sticks into certain motherboard slots. Single-channel is just a single RAM stick.

HTTPS differs from HTTP in that the traffic is ______ and it uses port number ____ . (A) Throttled, 143 (B) Compressed, 110 (C) Password protected, 80 (D) Encrypted, 443

(D) Encrypted, 443 Correct: HTTPS differs from HTTP in that the traffic is encrypted. It uses port number 443. Incorrect: HTTPS does not compress as part of the protocol, but, like HTTP, it supports compressed data such as images. Port 110 is for POP3 e-mail servers. Throttling is the process of reducing bandwidth for certain systems or networks. This is usually done by ISPs to prevent abuse of their bandwidth. Port 143 is for IMAP e-mail servers. A password is commonly used for an HTTPS site's authentication, but port 80 is for HTTP, not HTTPS.

A user calls the help desk because an important presentation folder is missing from the desktop of his system. The user is certain the folder was there the previous day. The technician views the properties of the parent folder, and confirms a back up listed on the "Prior Versions" tab. According to the theory of troubleshooting, which of the following is the technician's NEXT step? (A) Document findings, actions and outcomes (B) Test the theory to determine cause (C) Verify full system functionality and implement preventive measures (D) Establish a theory of probable cause

(D) Establish a theory of probable cause Once you have identified a problem, the next step in troubleshooting theory is to establish a theory of probable cause. Incorrect answers reasons: Test the theory is incorrect, you need to create the theory first. You cannot document findings, actions and outcomes when you do not have any yet. Verifying the system does not help solve the customer's problem, and since we don't know what happened yet; we cannot implement preventative measures.

What type of device should be placed in a DMZ? (A) Backup server (B) Smartphone (C) Wireless printer (D) Gaming server

(D) Gaming server When setting up a gaming server, it's important to make it as easy as possible for others to connect. Putting the server in a DMZ does this. Incorrect answers reasons: A backup server contains private information, so you want it as protected as possible. A smartphone also contains private information, so you don't want it Internet accessible. You don't want anyone from the Internet using your wireless printer! Don't put it in a DMZ.

John's client needs to connect an external monitor to his laptop. Which connection types is the laptop most likely to have to accomplish this goal? (Select TWO). (A) RCA (B) PS/2 (C) Serial (D) HDMI (E) VGA

(D) HDMI (E) VGA Most laptops have a VGA port. Many new ones also have an HDMI port. Incorrect answers reasons: PS/2 ports enable you to connect a keyboard or pointing device (like a mouse) to a computer. Serial ports are ancient and were used to connect mice. RCA jacks are for audio, not video.

When walking past a server with a RAID 5 array, a technician hears a loud clicking noise. Which of the following could most likely occur? (A) RAID array failure (B) OS not found on boot (C) BSOD (D) Hard drive failure

(D) Hard drive failure A clicking hard drive means a dying hard drive. Get that hard drive out of the raid and replaced as quick as possible! Incorrect answers reasons: None of the other answers cause clicking.

What type of printer uses an imaging drum? (A) Thermal (B) Inkjet (C) Impact (D) Laser

(D) Laser Laser printers use lasers to charge the surface of the imaging drum in the shape of the image to be printed. Incorrect answers reasons: None of the other printers use an imaging drum.

Which of the following battery technologies is most likely to be found in modern portable devices? (A) Lithium-carbhonate (B) Lithium-anode (C) Lithium-oxide (D) Lithium-ion

(D) Lithium-ion Incorrect answers reasons: Lithium-carbonate, Lithium-anode and Lithium-oxide were terms the question maker dug up on the Internet.

Which of the following displays would provide the BEST range of visible colors? (A) CRT (B) LCD (C) Plasma (D) OLED

(D) OLED OLEDs are able to use LEDs that generate both light and color when supplied a current. This gives the display better perfomance, and a smaller size. Incorrect answers reasons: Cathode ray tube (CRT) is an older technology. Although modern, plasma screens have a smaller color gamut than OLED. LCD screen technology is also modern, however, since LCDs leak light, they do not provide as good a contrast ratio.

Dave has a newly installed locally connected printer. When he tries to print a test page, he gets no error, but the printer fails to print. Which of the following would he want to check first? (A) Network connection (B) Task Scheduler (C) DHCP Service (D) Print Spooler Service

(D) Print Spooler Service He would want to check the Print Spooler Service first. Incorrect answers reasons: This is a locally connected printer, so both DHCP service and Network connection—network features—have nothing to do with this problem. Task scheduler has nothing to do with printing, leaving only the Print Spooler as an obvious choice.

You have just assembled your first PC. You hit the power button and the computer turns on. As the computer runs through POST, it starts beeping multiple times and you don't see anything displayed on the LCD. You notice there are no activity lights flashing for the HDD. However, when you check the inside of the computer, you can hear the drive spinning up. What is the NEXT thing you are going to check in order to get the PC functioning? (A) Change the jumper settings to C/S (B) Reseat your Front Panel LEDs (C) Replace the LCD with one that functions (D) Reseat your RAM

(D) Reseat your RAM Reseat your RAM. Amongst all the information you were able to gather from this scenario, knowing that it was making multiple beeps is an indication that the RAM is not seated correctly or worse yet... is bad! Incorrect answers reasons: Changing you hard drive settings to Cable Select (C/S) won't effect your outcome of POST. Replacing the LCD monitor won't change the lack of character on the screen because your RAM still needs to be seated. Reseating your Front Panel LED's, while a good idea considering you don't see hard drive activity, would not fix a no-boot situation like you are in.

Which of the following is always a feature of a riser card? (A) Riser cards only work with PCI (B) Riser cards do not work with PCIe (C) Riser cards are limited to 1/2 CPU speed (D) Riser cards always contain multiple expansion slots

(D) Riser cards always contain multiple expansion slots Incorrect answers reasons: The other answers are simply not true. Riser cards come in both PCI and PCIe flavors.

Tammy's inkjet printer isn't printing one of the colors. She should first try: (A) Soaking the cartridge in naphtha overnight (B) Replacing the clogged cartridge (C) Installing a new maintenance kit (D) Running the maintenance program to clear the clogged jet

(D) Running the maintenance program to clear the clogged jet One should always try using the maintenance software first for any problem on an inkjet printer. Incorrect answers reasons: Replacing the cartridge would come after attempting to clear it with the maintenance program. Soaking the cartridge will not fix the issue.

A consultant is looking to consolidate six company servers into one physical system. Which of the following requirements is most important on the new setup to ensure stable functionality of the virtual environment? (A) Client hardware requirements (B) Network resources (C) Server software security requirements (D) Server hardware resources

(D) Server hardware resources Using a powerful system as the virtualization server will ensure that the virtual environments all run smoothly and without problems. Incorrect answers reasons: Client machines need relatively little hardware resources; that's one of the benefits of virtualization servers. The server should undoubtedly be secure, but that's less important initially than making sure the hardware is up to snuff. No one's going to hack a server that's always crashing, after all. Having a fast enough network to host the virtual environments is also important, but, again, a super fast network won't help an underpowered server.

A broken fan can cause __________ damage to the CPU. (A) Radiation (B) Electro-static (C) Shock (D) Thermal

(D) Thermal Thermal damage is simply a more technical way to say "overheating". Incorrect answers reasons: A broken fan will not cause any electro-static, radiation, or shock damage to the CPU.

Which of the following technology converts light into digital information? (A) Inverter (B) Digitizer (C) Microphone (D) Webcam

(D) Webcam The webcam converts light into digital information. Incorrect answers reasons: Microphones convert waves to digital information. Digitizers convert analog information to digital information. An inverter converts electrical current.

Using your Web browser, you can access a number of Web sites. However, certain sites just give a screen saying, "You may not access this page." Which of the following is the most likely reason for this? (A) The problem sites all require usernames and passwords (B) You do not have HTTPS enabled (C) DNS is down on those sites (D) Your Web browser is using a proxy server

(D) Your Web browser is using a proxy server Your Web browser is using a proxy server. One of the main reasons for using a proxy server is to block unacceptable sites. The error described in the question is indicative of a proxy server. Incorrect answers reasons: If DNS was down, your browser would not be able to find the website and would give an error to that effect. While it is possible to shut down HTTPS on your browser, it is highly unlikely. If the problem sites all required usernames and passwords, you would get a prompt for a username and password.

What is the correct URL for a secured Internet site called TotalTest.com? (A) httpsec://TotalTest.com (B) ftp://totaltest.com (C) http://TotalTest.com (D) https://totaltest.com

(D) https://totaltest.com The correct URL is https://totaltest.com. Web addresses are not case-sensitive, so TotalTest is the same as totaltest. Incorrect answers reasons: ftp://totaltest.com FTP is the file transfer protocol, used to transfer files from one computer to another over the Internet. Http://TotalTest.com. This would be correct if the site was not secured. Httpsec://TotalTest.com. This is made up and incorrect.


Set pelajaran terkait

Inquizitive Ch. 1 Western Civilization

View Set

Physics Chapter 3 projectile motion example

View Set

NUR 408 - Exam 3 - Book Questions

View Set

Entrepreneurship Chapter 3 Vocabulary

View Set

Biology: Plant- and Fungus-like Protist Quiz 3

View Set

Chapter 37: Musculoskeletal Trauma

View Set

Intro to Psychology Personality and Psychological Disorders

View Set

2: Section 1: Economics (All Practice Checkpoints)

View Set