welding exam review - part 1

Acetylene can never exceed what working PSI?

15 PSI

Approximately how much pressure does a fully filled oxygen cylinder hold?

2200 psi

What does E7018 stand for

A basic electrode designed to improve deposition rate and bead appearance for welding mild and low alloyed steels under conditions of high restraint

What is flashburn? And what part of your body does it burn?

A burn to the eye produced by Arc Welding

What are the five welding joints?

Butt joint, corner joint, lap joint, tee joint and edge joint

What color is an oxygen hose?

Green

plug and slot welds are commonly used on what joint?

Lap joint

MSDS or SDS sheets are what?

Material Safety Data Sheets that explain different chemicals and hazardous materials. These sheets list information such as precautions and possible hazards of a chemical substance

Should acetylene and gas ever be used while it is lying on its side?

No

What does OSHA stand for and what do they do

Occupational Safety and Health Administration. They assure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance

You should never use what on torch fittings, hoses, regulators and cylinders

Oil

Shade lenses should be used for what type of welding

Oxyfuel welding and cutting

What color is a fuel gas hose?

Red

What is the primary element of every welding symbol?

Reference line

A burn that causes skin to blister is what kind of burn

Second Degree

What is SMAW-

Shielding Metal Arc Welding = Arc welding process in which metal is cut by melting it with the heat of an arc between a covered electrode and the base metal

What side of the reference line of a weld symbol is the other side?

above the reference line

What is a Hot Work Permit needed for?

any temporary operation involving open flames or producing heat, sparks, or both in an occupied tenant space

What is the difference between a back weld and a backing weld

backing weld is done before back weld

Areas less than 10,000 cubic feet per welder or that have ceilings less than 16 feet high require what kind of ventilation

forced

Is acetylene and liquid or gas inside the tank?

gas

Can oxygen be stored with flammable gases

no