WKU AMS163 Midterm

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

In an isometric drawing the lines appear to recede toward a vanishing point as does a perspective drawing

In a perspective drawing, lines appear to recede toward a vanishing point, whereas in an isometric drawing the receding lines are drawn parallel.

Match the Job to the Description: Mechanical, Process Piping,Bachelor's, Electronics, Associate's

M:work with mechanical engineers and designers to prepare detail and assembly drawings of machinery and mechanical devices. PP: prepare drawings used in the construction of oil refineries, oil exploration and production industries, chemical plants, and process piping systems like those used in the manufacture of semiconductor devices. B: programs generally take 4 to 5 years to complete and usually require that students master higher level courses in mathematics and physics. E: create schematic diagrams, printed circuit board artwork, integrated circuit layouts, and other graphics used in the repair and manufacture of electronic (semiconductor) devices. A: These programs usually take from 1 to 2 years to complete and focus on the skills necessary to work as a drafter in industry. These skills may include drafting techniques, knowledge of drafting standards, and how CAD programs are used to create drawings.

Match each term to the appropriate descriptor. POLYGON, CHAMFER, POLAR, LIMITS, ABSOLUTE, RECTANGLE, FILLET, RELATIVE

P-

Three tools used by traditional drafters to draw parallel horizontal & vertical lines are:

Parallel Straight Edge; the 30-60 Triangle; and the 45 Triangle.

What do the arrows on a cutting plane line represent

The arrows on the ends of the cutting plane line indicate the direction the viewer is observing the sectioned object

What does 1/4" = 1'-0" represent on an architectural drawing of a house

every 1/4 of an inch on the plotted drawing will represent a measurement of one foot on the actual construction project.

The diameter of a hole is a location dimension

false it is a size dimension

Unidirectional text direction is associated with AIA and NCS architectural standards for dimensioning while aligned (bottom and right side of the drawing sheet) are acceptable and associated with ASME mechanical drawings

false other way around

Angles of inclined planes can be measured directly in an isometric drawing.

false- must locate the start and end points of the edges of the angled plane by using measurements

The engineer's scale is used by mechanical engineers in the U.S. to measure drawings in metric

false; they use they metric scale to measure in metric units

What is the name of the HATCH setting that controls the density of the hatch pattern

hatch scale

Match the term to the Style 1-Primary Units 2-Lines 3-Text 4-Fit 5-Symbols and Arrows

look in book for what asking

3-4What does each, actual, physically smallest incremented unit read as on all sides of the metric scale

millimeters

The three qualities that technical lettering should possess are

neatness; legibility; and uniform size.

The acronym of the International Standards Organization is IOS

no ISO

Generally, the locations of doors and windows defined with dimensions on architectural drawings indicate a dimension to the edge of the opening but not the center

no dimension from middle of door or window

6-Engineers are responsible for determining dimensions on architectural drawings and not calculations

no drafters are

Aligned text on architectural dimension lines are in direction of the top and left of the drawing sheet

no face bottom and right side of sheet

On which tab in the Drafting Settings dialog box is the Rectangular Snap button located

snap and grid

Where is a removed section placed on a drawing

somewhere else on the sheet

The six regular views are

top, bottom, left, right, front, back

5-A dimension to which the tolerances are applied is called a nominal dimension

true

A datum is a theoretically perfect feature (plane, axis, or point) from which dimensions can be referenced

true

A tolerance can be described as acceptable variation to manufacturing engineers

true

In the United States, the name of the organization that publishes a dimensioning standard for engineering drawings is the American Society of Mechanical Engineers (ASME)

true

Pressing <F5> or <Ctrl> +E are the two ways to change the orientation of the crosshairs in an isometric drawing created with AutoCAD

true

The designer is responsible for calculating tolerances in an engineering drawing

true

In the United States, the United States National CAD Standard (NCS) is an organization that publishes a drawing standard for architectural drawings, along with the American Institute of Architects (AIA)

yes

A slash or tick marks are the termination symbol often used on architectural dimension lines

yes (but check)

What is the size for an architectural D sheet

34 X 22 inches

Drafting triangles come in the following angles:

45 and 30/60

At what angle is the major axis of an ellipse drawn on the isoright plane

60 degrees

What is the angle of an object's vertical lines in an isometric drawing

90 degrees

The four lead widths in which technical pencils can be purchased are:

0.3mm; 0.5mm; 0.7mm; and 0.9mm.

What is the sheet size for a mechanical B size sheet

17X11 inches

What ratio indicates that a drawing is full size

1:1

Match: 2 = 1 , .3mm , 1 = 2 , .6mm

2 = 1 - double scale - twice size .3mm - hidden, center, dimension, extension, section line 1 = 2 - half scale - half sized .6mm - visible and cutting plane line

There are approximately cm or mm within 1-inch.

2.54cm or 25.4mm

What is the angle of an object's horizontal lines in an isometric drawing

30 degree

The acronym AIA stands for

America Institute of Architects

The job titles of people who might constitute a design team are:

Drafters; Designers; Architects; and Engineers

The protractor divides

a full circle into 360 degrees and the half-moon protractor into 180 degrees

Which of the following attributes do most employers value

attitude regarding work and his ability to learn quickly and contribute to the team right away


Set pelajaran terkait

Tissues Chapter 4 - Checking Understanding

View Set

Egg, Milk and Cheese test review

View Set

TA-270: Small and Medium Entities (SME's)

View Set

Vocabulary for John Lewis' Letter to Young People

View Set

Unit 9.1 Definitions Under The uniform Securities Act (Series 65)

View Set