105.1-105.20 // Sculpture Cut // Lesson Challenge

The solid form is also known as a one-length cut, bob, Dutch boy, blunt cut or a: a. 90 degree haircut b. 45 degree haircut c. 0 degree haircut d. 60 degree haircut

0 degree haircut

Which of the following angles is considered to represent low projection(elevation)? a. 0° to 30° b. 30° to 60° c. 90° to 180° d. 60° to 90°

0° to 30°

Base texturizing is performed up to: a. 1/2" (1.25 cm) from the scalp b. 1" (2.5 cm) from the scalp c. 1 1/2" (3.75 cm)from the scalp d. 2" (5.0 cm)( from the scalp

1" (2.5 cm) from the scalp

Which of the following projection angles is used to create medium graduation? a. 0°-30° b. 30°-60° c. 60°-90° d. 90°-120°

30°-60°

The projection angle used to create the arrangement of hair lengths that are the same throughout the head is: a. 0° b. 30° c. 45° d. 90°

90°

Which projection angle is used to sculpt the uniformly layered form? a. natural fall b. 0° c. 45° d. 90°

90°

The finger position used to conserve the most length and sculpting increase layers is: a. parallel b. nonparallel c. stationary d. perpendicular

parallel

When sculpting with a razor, all of the following results are achieved EXCEPT: a. ends are tapered b. softer appearance to hair c. a diffused form line appears d. regular alternation of short and long lengths

regular alternation of short and long lengths

In order to determine your clients level of satisfaction, request feedback and look for: a. your tip b. your next client c. verbal and nonverbal cues d. approval from staff members

verbal and nonverbal cues

Solid form sculptures can be created along the following lines EXCEPT: a. convex b. vertical c. diagonal d. horizontal

vertical

Teaching the client how to perform at home hair care maintenance is important during which sculpture service essential? a. Create b. Consult c. Connect d. Complete

Create

Texturizing reduces bulk without: a. lengthening the hair b. adding volume to the hair c. adding additional movement to the hair d. Shortening the overall length appearance of the hair

Shortening the overall length appearance of the hair

When interior increase layers are sculpted at longer lengths, the resulting texture of the hair sculpture will be: a. totally activated b. totally unactivated c. activated in the interior only d. a combination of activated and unactivated

a combination of activated and unactivated

All of the following are guidelines to follow during the Connect sculpture service essential EXCEPT: a. build rapport b. greet client with a firm handshake c. ask questions to discover client needs d. greet client with a pleasant tone of voice

ask questions to discover client needs

Which of the following is a guideline to follow during the Consult sculpture service essential? a. complete a client record b. preform a scalp massage to relax the client c. communicate to develop a connection with the client d. ask specific questions such as "would you like your ears exposed?"

ask specific questions such as "would you like your ears exposed?"

All of the following are ways to reassure or calm a child during a sculpture service EXCEPT: a. offering a reward b. using fun language c. asking them to keep quiet d. kneeling down to make eye contact

asking them to keep quiet

The weight in a graduated form is positioned: a. low b. high c. at the perimeter form line d. above the perimeter form line

at the perimeter form line

Which type of texturizing technique is used to create expansion and fullness while removing weight at the base area? a. end texturizing b. base texturizing c. shear-over-comb d. midstrand texturizing

base texturizing

A change in hair sculpture can transform a clients look in any of the following ways EXCEPT: a. becoming more fit b. becoming more sporty c. becoming more professional d. becoming more sophisticated

becoming more fit

Projecting below 90° would: a. build weight b. remove bulk c. remove weight d. shorten lengths

build weight

If an older child comes into the salon without a parent consider: a. calling the parent first b. offering them the latest trends c. reducing the cost of service d. having them sign a release form

calling the parent first

To hold the comb and shears in the same hand without jeopardizing the clients safety, release the thumb grip and: a. close your palm over the shears b. close your fingers over the finger grip c. wrap your thumb around the finger grip d. wrap your fingers tightly around the blade

close your palm over the shears

Ask question and look for verbal and nonverbal cues to determine your client's level of satisfaction a. connect b. consult c. create d. complete

complete

Escort client to the retail area and show the products you used a. connect b. consult c. create d. complete

complete

Build rapport and develop a relationship with the client a. connect b. consult c. create d. complete

connect

Meet & greet the client with a firm handshake a. connect b. consult c. create d. complete

connect

Explain the cost and maintenance associated with all the services a. connect b. consult c. create d. complete

consult

What do you like, dislike, about your previous cut a. connect b. consult c. create d. complete

consult

Would you like layers in your hair a. connect b. consult c. create d. complete

consult

analyze your client's face and body shape, physical features, hair and scalp a. connect b. consult c. create d. complete

consult

The projection angle of the stationary design line is most important because it establishes the location to which all other lengths are: a. etched b. notched c. converged d. manipulated

converged

The most common technique used to sculpt increased layered form is a. notching b. razor etching c. conversion layering d. a mobile design line

conversion layering

Ensure your client is protected by draping with a towel and plastic cape during the shampoo process a. connect b. consult c. create d. complete

create

Explain to your client the products you are using throughout the service and why a. connect b. consult c. create d. complete

create

Perform a scalp massage to relax the client while shampooing the hair a. connect b. consult c. create d. complete

create

Personalize the hair sculpture after you air form the hair to add your signature touch a. connect b. consult c. create d. complete

create

Which of the following is true about the 32 teeth taper shears? a. create highly textured effects b. create lightly tapered effects c. produce dramatic chunky effects d. remove a minimal amount of hair within a parting

create highly textured effects

Which of the following terms identifies the technique used to check the accuracy of a hair sculpture by using the opposite parting pattern? a. parting b. sectioning c. texturizing d. cross checking

cross checking

To keep a child from squirming, remind them that squirming may cause you to: a. cut yourself b. cut him or her c. never do their hair again d. tell their parents they were misbehaving

cut yourself

When performing a hair sculpture which of the following determines the size of the partings? a. color b. length c. texture d. density

density

Generally, the parting pattern for the solid form is parallel to the: a. comb b. shears c. design line d. sectioning line

design line

When diagonal forward perimeter is desired when sculpting increase layered form, which parting pattern should be used? a. vertical b. horizontal c. diagonal back d. diagonal forward

diagonal back

A technique performed on the ends of the hair to allow for mobility, soften the ends and blend weight lines is called a. slithering b. razor rotation c. end texturizing d. base texturizing

end texturizing

With a parallel finger and shear position, the fingers are positioned: a. unequal distance away from the parting b. equal distance away from the parting c. one half the distance from the parting d. one forth the distance from the parting

equal distance away from the parting

What can be done while sculpting shorter uniform lengths to maintain equal distance from the head? a. change palm position b. project lengths at the opposite angle c. visually assess lengths in natural fall d. extend little finger and rest it on the scalp

extend little finger and rest it on the scalp

Where are the shortest lengths found in the solid form? a. apex b. crown c. interior d. exterior

exterior

At the basic level of observation, a hair sculpture can be identified by observing the outer boundary or silhouette known as the: a. detail b. structure c. texture d. form line

form line

An advanced technique used when sculpting uniform layers on lightly curled hair is called: a. refine b. freeform c. stretching d. customizing

freeform

As it sculpts the hair, the movable blade of the clippers moves: a. up and down b. to the left only c. to the right only d. from side to side

from side to side

What form would result from using 45° projection? a. solid b. graduated c. increase-layered d. uniformly layered

graduated

When using a clippers, the attachment that allows the hair to be sculpted at the same length is the: a. taper b. razor c. guard d. trimmer

guard

All of the following are sculpting positions EXCEPT: a. palm up b. palm down c. palm to palm d. hand to hand

hand to hand

The apex refers to what part of the head? a. occipital b. crest area c. crown area d. highest point

highest point

When sculpting an increased layered, which parting pattern positions layered texture equally around the head: a. convex b. vertical c. concave d. horizontal

horizontal

Which parting pattern creates the appearance of weight in a uniformly layered form? a. pivotal b. diagonal c. vertical d. horizontal

horizontal

The basic form that consists of shorter interior lengths that progress toward longer exterior lengths is known as: a. solid b. graduated c. increased layer d. uniformly layered

increased layer

The shortest lengths in an increased layered form are found in the: a. nape b. interior c. directional d. perpendicular

interior

Which of the following is not a characteristic of the solid form a. interior activation b. unactivated texture c. maximum perimeter weight d. lengths fall to the same level

interior activation

Which of the following describes the lengths of the uniformly layered form? a. progress from shorter to longer b. progress from longer to shorter c. lengths are uneven d. lengths are all equal

lengths are all equal

In natural fall, all lengths in the solid form fall to the same: a. level b. angle c. space d. guide

level

Channeling shears are primarily used for all of the following special effects EXCEPT: a. heavy fringes b. extreme length variations c. lightly tapered effects d. notched perimeter lengths

lightly tapered effects

Graduation can be created by using a vertical parting and positioning your fingers along the intended: a. weight line b. perimeter form line c. line of inclination d. interior design line

line of inclination

An angle of 45° would be considered what type of projection? a. low b. high c. medium d. very high

medium

A design line that is used as a length guide for sculpting uniformly layered forms is referred to as: a. stable b. curved c. mobile d. stationary

mobile

Why type of design line is used to sculpt uniform lengths? a. mobile b. stationary c. combination d. multiple stationary

mobile

The distribution used to sculpt solid form is: a. natural b. shifted c. directional d. perpendicular

natural

If weight is desired at the perimeter of an increased layer form, sculpt the perimeter in natural form. a. natural fall b. normal projection c. increasing lengths d. decreasing lengths

natural fall

When sculpting graduated forms, projection angles are measured from: a. a comb b. natural fall c. body position d. finger position

natural fall

Which of the following projection angles are used to sculpt solid form? a. 0° and 45° b. 45° and 90° c. natural fall and 0° d. natural fall and 45°

natural fall and 0°

When the hair is viewed abstractly as if it were projected at a 90 degree angle from the various curves of the head, it is referred to as: a. structure b. natural fall c. surface texture d. normal projection

normal projection

The shape or silhouette of the increased layered form resembles which of the following shapes: a. oval b. round c. triangular d. rectangular

oval

All of the following descriptions are true about the uniformly layered form EXCEPT: a. oval shape b. rounded shape c. activated texture d. same length throughout

oval shape

The technique of sculpting each parting slightly longer as you work up the head is known as a. blunt b. overlapping c. comb control d. cross-checking

overlapping

In most instances, which of the following finger/shear positions is used to sculpt graduation from horizontal or diagonal partings: a. parallel b. vertical c. curved d. nonparallel

parallel

An uneven effect is created when sculpting curly hair that is: a. completely wet b. completely dry c. chemically treated d. partly wet and partly dry

partly wet and partly dry

The most common type of distribution used to sculpt increase layered forms is: a. shifted b. natural c. directional d. perpendicular

perpendicular

What type of distribution is used to sculpt uniform lengths? a. natural b. shifted c. directional d. perpendicular

perpendicular

What type of distribution results in a 90° angle from its base parting? a. shifted b. parallel c. nonparallel d. perpendicular

perpendicular

Communicating with your client prior to and during the service will help you avoid misunderstandings and ensure: a. predictable results b. a proper shampoo treatment c. their friends will give them compliments d. the sculpture is completed in a timely manner

predictable results

What term, also known as elevation, is the angle at which the hair is held in relation to the curve of the head prior to cutting? a. distribution b. projection c. texturizing d. cross-checking

projection

When sculpting graduated texture from horizontal and diagonal partings, natural distribution must be combined with: a. projection b. natural fall c. parallel finger position d. perpendicular distribution

projection

What is the first step in cleaning combs and brushes? a. remove hair and debris b. scrub with soap and water c. immerse in soap and water d. immerse in a disinfectant solution

remove hair and debris

In a graduated form, the line that divides the activated and unactivated textures is known as the: a. form line b. ridge line c. weight line d. perimeter line

ridge line

The line that visually separates activated and unactivated textures in a graduated form is called the: a. form line b. ridge line c. inclination d. perimeter line

ridge line

Which finger should be placed in the finger grip to control the still blade when holding shears? a. ring b. pinky c. index d. thumb

ring

All of the following are methods used to disinfect tools and equipment EXCEPT: a. rinse b. spray c. immersion d. disinfectant wipes

rinse

Which of the following can be done to establish more weight along the perimeter hairline when sculpting a uniformly layered form? a. sculpt perimeter at a 45° angle b. sculpt perimeter at a 90° angle c. sculpt perimeter using shifted distribution d. sculpt larger perimeter section in natural fall first

sculpt larger perimeter section in natural fall first

The term used to describe dividing the hair into workable areas for control a. designing b. texturizing c. sectioning d. positioning

sectioning

What type of design line is used to sculpt solid form? a. mobile b. natural c. multiple d. stationary

stationary

Which of the following design line is used to build a weight area in a graduated form: a. mobile b. vertical c. diagonal d. stationary

stationary

Sculpture transformation is all about changing the shape, surface texture and: a. detail b. structure c. color d. form line

structure

Which tool allows you to sculpt as close to the scalp as possible while using shear over comb and clipper over comb techniques a. razor b. trimmer c. cutting comb d. taper/contour comb

taper/contour comb

What can cause a graduated appearance to occur over the ear when sculpting solid forms? a. tension b. no projection c. comb control d. freeform sculpting

tension

The surface appearance of hair is referred to as: a. texture b. density c. elasticity d. condition

texture

Which of the following statements is true when sculpting uniformly layered forms with tighter curl patterns? a. the curl pattern will appear looser b. the curl pattern will appear more straight c. the hair will appear longer after sculpting d. he hair will appear shorter after sculpture

the hair will appear shorter after sculpture

When lifting the lengths on top of the head, you will need to sculpt the hair along which area of your fingers a. the top b. the inside c. underneath d. the knuckle

the top

The shape of a graduated form is a. oval b. round c. triangular d. rectangular

triangular

When sculpting uniformly layered lengths, the design should remain visible: a. visible b. vertical c. horizontal d. stationary

visible

The visual contrast between textures in graduated form is reduced when sculpted on what type of hair a. fine b. wavy c. thick d. straight

wavy

The proportional relationship of each form within a combination produces the shape, texture and position of: a. color b. weight c. the interior d. the exterior

weight