Bicsii

Ace your homework & exams now with Quizwiz!

6A

Category _____ or higher is recommended for horizontal cabling

Class 1

Class _____ address the needs of the premises served by a single ER, which is the only telecommunications space on site

Class 3

Class _____ addresses infrastructure with multiple buildings at a single site (e.g., campus environment)

568.1

Commercial Building Telecommunications Infrastructure Standard

6

Fall protection is required whenever a person is exposed to a fall hazard to another level of more than _____ feet

5e

For all new installations, multi pair backbone meet the minimum performance of category _____ cable

568.0

Generic Telecommunications Cabling for Customer Premises

Stranded

IPCs can be used for __________ cables

Resistance, Capacitive Reactance, and Inductive Reactance

Impedance is the combined affect of __________, __________, and __________

Impedance

In AC circuits, the total opposition to current flow is called __________, which is measure in ohms

NEC

In North America and many other regions, the code most commonly encountered is the __________

Star

In the _____ topology, the network switch is placed in the physical as well as the logical center of the network

568.3

Optical Fiber Cabling components standard

Black

Pair 1440 would be in the __________ Super Binder

Black/Blue

Pair 267 is in the __________ binder

Violet/Brown

Pair 600 is in the __________ binder group

Red

Pair 626 would be in the __________ Super Binder

55

Personnel should not lift a load in excess of _____ lbs per person

Electrical Shock, Falling or Flying Objects, and A Blow to the Head

Protective headgear (hard hats) protect the installer from __________, __________, and __________

5e

The horizontal cabling provided to each individual work area shall consist of telecommunications outlet/connectors connected to category _____

1/4

The horizontal distance from the base of the ladder to the supporting wall should be _____ the working length of the ladder

TP

The interconnection point between horizontal cabling and UTC

16.5 feet

The maximum equipment cord length in the work area

Insertion Loss (Attenuation)

The measure of signal loss resulting from the insertion of a component, link, or channel between a transmitter and receiver

100

The nominal characteristic impedance of balanced twisted pair cable is _____ ohms at 100 MHz

Nominal Velocity of Propagation (NVP)

The ratio speed of transmission along a cable relative to the speed of light in a vacuum

Alien Crosstalk (AXT)

The unwanted signal coupling from a disturbing pair of a 4-pair cable channel, permanent link, or component to a disturbed pair of another 4-pair channel, permanent link or component. The disturbed pair is sometimes referred to as the "victim cable"

4P4C

These connectors are primarily used for handset cords

8P8C

These connectors are used for ICT equipment and patch cords

6P6C

These connectors are used primarily for telephones and modem lines

N and BNC

These connectors both have center pins

568.4

Broadband Coaxial Cabling and Components Standards

5,000

A PFAS included a full-body harness, a shock-absorbing lanyard, and a secure anchorage point capable of supporting __________ lbs

3,600 Feet Squared

A TE can serve a maximum of __________

Intermediate Cross-Connect

A __________ connects 1st level backbone to 2nd level backbone

Interconnection

A __________ connects a cable to an active component

Telecommunications Room (TR)

A __________ is an enclosed architectural space for housing telecommunications equipment, cable terminations, and cross-connect cabling

Telecommunications Room (TR)

A __________ typically serves one floor of a building or a portion of a floor

6

A gauge change of ____ numbers approximately doubles or halves the conductor's diameter

3

A gauge change of ____ numbers approximately doubles or halves the conductor's resistance

3

A gauge change of _____ numbers approximately doubles or halves the conductor's cross-sectional area

Near-End Crosstalk (NEXT)

A measure of the unwanted signal coupling from a transmitter at the near end into another pair measure at the near end

2

A minimum of _____ telecommunications outlet/connectors is recommended per work area

ANSI

A private, not-for-profit organization that serves as the administrator and coordinator of the United States' private sector voluntary standardization system

Inductance

A property of an electromagnetic field built around a conductor that opposes any change in current flow in a circuit

Purple

The color field for the "Common Equipment" terminations field is _____

Orange

The color field for the "Demarcation Point" termination field is _____

Brown

The color field for the "Interbuilding Backbone Cable" termination field is _____

Yellow

The color field for the "Miscellaneous" termination field is _____

Green

The color field for the "Network" termination field is _____

Red

The color field for the "Reserved" termination field is _____

Horizontal Cross-Connect (HC) or Floor Distributor (FD)

The connection between the Horizontal cable and the Backbone cable is called __________

Survey the scene ( "THE SCENE IS SAFE")

The first of the six basic steps to safely assist others without endangering yourself is __________

500 MHz

The frequency of a Category 6a cable

2000 MHz

The frequency of a Category 8 cable

2 to 3

__________ milliamperes produce a tingling of the skin

100

__________ milliamperes trigger ventricular fibrillation, which causes the heart to repeatedly relax and violently clamp shut

TSB 36

__________ was issued in 1991 to address categories

TSB 40

__________ was issued in 1992 for connectors

TIA/EIA 568

__________ was the first cabling standard. No categories were specified and connectors were not addressed

Capacitance

A property of conductors that allows storage of electrical charges when potential differences (voltages) exist between the conductors

Return Loss

A ratio of the power of the outgoing signal to the power of the reflected signal and is expressed in decibels

Code

A rule or set of rules intended to ensure safety during the installation and use of materials, components, fixtures, systems, premises, and related subjects

100

A typical work area is _____ feed squared

607

ANSI/TIA-_____ says that structural metal should be tested to verify its conductivity to earth

570

ANSI/TIA-_____ standardizes requirement for residential telecommunications cabling

Manufacturer's Instructions

According to the Hierarchy of Compliance Pyramid, __________ should be at the bottom

Authority Having Jurisdiction (AHJ)

According to the Hierarchy of Compliance Pyramid, __________ should be at the very top

Standard

An accepted collection of requirements and recommendations for the defining, constructions, evaluation, applications, or comparison of materials, equipments, products, and services

Regulations

An authoritative rule that controls or governs behavior leading to uniformity

DIN VDE

An example of the electrical code of Germany

BS 7671

An example of the electrical code of the United Kingdom

800

Article _____ says that communication wires and cables shall be listed

Coax

Between Coax and Twisted Pair, which has the highest bandwidth?

11

Series _____ is the preferred choice for longer runs

10

Stay at least _____ feet away from exposed energized electrical conductors, such as wires or crane bus bars, operating at 300 - 50,000 volts

False

T/F: Crosstalk values are typically a positive value

True

T/F: In the American Wire Gauge (AWG) system, smaller numbers equal larger wires and larger numbers equal smaller wires

True

T/F: Much like codes, regulations, once adopted by jurisdiction, are considered mandatory, and are typically enforced by some level of government

True

T/F: There are five colors associated with tip conductors

TSB 67

Testing first appeared in 1995 in __________. For 4 years, if you relied on the standards, you could install category 5 cable without testing

Airway

The "A" in "ABC" stands for __________

Confine

The "C" in "RACE" stands for __________

Interbuilding and Intrabuilding

The 2 difference "types" of backbone cabling are _________ and __________

Bus

The _____ topology is a linear configuration that places all of the network devices on one length of cable

Tree

The _____ topology is an extension of the bus topology

Star

The _____ topology is the required topology for structured cabling systems (SCS)

Violet/Slate

The __________ binder group is not used

Intermediate Cross-Connect (IC) or Building Distributor (BD)

The __________ is a building serving cross-connect that serves as the connection between two backbone cables

Main Cross-Connect (MC) or Campus Distributor (CD)

The __________ is housed in the ER and connects the entrance cabling, backbone cabling, and equipment cabling

AHJ

The __________ is responsible for enforcing the codes and legal regulations for the jurisdiction

White/Orange (Pin 3) Orange White (Pin 6)

The __________ pair is on pins 3 and 6 when using 568A

Labeling, Records, and Identifiers

The administration systems for each class include requirements for __________, __________, and __________

Industry Best Practices

Vendor-neutral methods that are widely used and accepted in a given industry because they have consistently shown superior results to those achieved through other means

Yellow/Orange

What color is pair 267?

606

You would look in ANSI/TIA-_____ if you needed information on the labeling standard

Manufacturer's Instructions

__________ are used by the manufacturer to list performance and technical characteristics for a given product

Horizontal

__________ cabling is the portion of the telecommunications cabling system that connect the work areas to the other telecommunications spaces

50-100

__________ milliamperes cause breathing to become difficult

10

__________ milliamperes produce a painful shock, and the muscles cannot release the contact


Related study sets

Marketing Management - Chapter 13

View Set

ECON Chapter 4: Demand and supply

View Set

Chapter 7 Segmentation, Target Marketing, and Positioning

View Set

CISSP 2020 SYBEX TEST PREP 475 QUESTIONS

View Set