Brunswick A-2 B-Mechanic Training -- Machine
Why must the gear box clutch be able to disengage at the following points? -- 90 degrees: -- 180 degrees -- 270 degrees -- 360 degrees
-- 90 degrees: OOR pin -- 180 degrees: waiting for pins (deck empty) -- 270 degrees: No reason -- 360 degrees: End of machine cycle
Safety Questions: (true/false) -- It is acceptable to move from machine to machine using the work platform -- You do not need to secure the spring guide tube when removing the deck lift shaft -- Always turn off circuit breaker when working on the front of the machine.
-- False -- False -- True
If the clutch latch snaps in under the pin on the clutch reset lever at 180 degrees, the gear box clutch will disengage at ____ degrees
270 degrees
The force required to overpower the gear box clutch spring and thereby disengage the clutch is provided by a cam on the ____ shaft
4:1 shaft
The deck makes the long stroke under control of the: -- Deck lowering Yoke -- Deck lowering hook
Deck Lowering yoke (-or- deck lowering link)
The deck makes the short stroke under the control of the: -- Deck lowering Yoke -- Deck lowering hook
Deck lowering hook
During which cycle with the gearbox clutch remain engaged at 180 degrees even if the deck is empty?
First ball standing pins
The force required to overpower the clutch plunger lever spring and push the clutch actuator link down is provided by cams on the ____ shaft
GB 1:1 shaft
Match the following by placing the correct letter in the spaces provided. A) Spring urged closed B) Spring urged disengaged C) Not spring urged Gearbox -- Magnetic Clutch --
Gearbox -- spring urged disengaged Magnetic Clutch -- Not spring urged
In the event the shotgun becomes unlatched during its sweep motion, what prevents the rake board from falling behind the pin deck at 180 degrees?
The rake lowering stop bracket
The gear box trigger time delay is provided to allow sufficient time for:
Wobbling pins to fall
The ____ powers the rake rearward and the ____ powers the rake forward.
rake hook and rake crank arm; rake tube spring
The moving deck is a spring urged ____ and the scissors are spring urged ____
rearward; closed
Name the two (2) micro switches which will turn off the machine in the event of a pin jam
turret jam switch deck jam switch
