Cad quiz
Which tool do you need to use to draw a rectangle at any angle?
3 Point Corner Rectangle
The ______ property ensures that any modification made in a model in any of the modes of SOLID WORKS is also reflected in the other modes immediately.
Bidirectional associativity
Which tool is used to create a circular pattern in the sketching enviromnet of SOLIDWORKS?
Circular Sketch Pattern
Which of the following entities is not considered while converting a sketch into a feature? (a)sketch circules (b)sketched lines (c)Construction Lines (d)None of these
Construction Lines
Which tool is used to invoke dynamic mirroring?
Dynamic Mirror Entities
Which of the following tools is used to create an automatic mirror line? (a)Dynamic mirror entities (b)Mirror (c)Automatic Mirror (d)None of these
Dynamic mirror entities
Which of the following PropertyManagers is displayed while drawing an elliptical arc? (a)Arc PropetyManager (b)Ellipse PropertyManager (c)Elliptical Arc PropertyManager (d)None of these
Ellipse PropertyManager
____________ are the analytical and numerical formulae applied to the dimensions during or after sketching of the feature sketch.
Equations
In SOLID WORKS, solid models are created by integrating a number of building blocks called features.
False
In Solid works, circles are drawn by specifying the center point of the circle and then entering the radius of the circle in the dialog box displayed
False
The origin is a blue icon that is displayed in the middle of the sketcher screen.(t/f)
False
The preview of an entity to be extended is displayed in red. (t/f)
False
The sketched entities can be mirrored without using center lines. (t/f)
False
The tip of the day is displayed at the bottom of the task pane
False
True or False: By default, the cursor jumps through a distance of 5 mm when the grid snap is on.
False
True or False: If you save a file in the sketching environment and then open it the next time, it will open in the part modeling enviroment.
False
True or False: In the sketching environment, you can apply fillets to two parallel lines.
False
True or False: The design intent is not captured in the sketch created using the mirror line.
False
True or False: You can choose Insert > Customize from the SOLIDWORKS menus to display the Customize dialog box.
False
True or False: You cannot offset a single entity using the Offset Entities tool.
False
When you open a new Solid works document, it is not maximized in the solid works window.
False
You can not trim a sketched entity using the trim entities tools.(t/f)
False
Which of the following property Mangers is displayed when you choose the sketch fillet button from the sketch command manager (a) sketch fillet (b)fillet (c)Surface fillet (d)sketching fillet
Fillet
You can convert a sketched entity into a construction entity by selecting which checkbox? (provided in the Property Manager)
ForConstruction
What are temporary lines that are used to track a particular point on the screen?
Inferencing lines
Which of the following property Managers is displayed when you select a line of a rectangle? (a)Line Properties PropertyManager (b)Line/Rectangle PropertyManager (c)Rectangle PropertyManager (d)None of these
Line Properties PropertyManager
Which tool is used to create a linear pattern in the sketching environment of SOLIDWORKS?
Linear Sketch Pattern
In Solidworks, a polygon is considred as a combination of which of the following entites? (a)Lines (b)Arcs (c)Splines (d)none of these
Lines
Which tool do you use to modify a sketched circle?
Select
You can invoke the ________ tool or press the ESC key to exit the currently active sketching tool.
Select
Which of the following propertyManagers is displayed on the left of the drawing area when you choose Tools>sketch tools<Chamfer (a)Sketch chamfer (b)Sketcher Chamfer (c)Skecthing Chamfer (d)Chamfer
Sketch chamfer
Which of the following tools is used to break a sketched entity into two or more entites? (a)split entities (b)Trim sketch (c)Break Curve (d)Trim Curve
Split Entities
When you select a tangent entity to draw a tangent arc, the ________ relation is applied between the start point of the arc and the tangent entity.
Tangent
A three point arc is drawn by defining the start point, the endpoint, and a point on the arc. (t/f)
True
Generative drafting in the process of generating drawing views of a part of an assembly created earlier.
True
The Dimension angle between axes check box in the linear pattern propertymanager is used to display the Angular dimension between the two directions of a pattern (t/f).
True
There are four types of slot tools available in solid works.(t/f)
True
True or False: The Trim Entities tool is also used to extend the sketched entities.
True
True or False: You can apply a fillet to two nonparallel and non-intersecting entities.
True
True or False: You can invoke the arc mode using the Line tool.
True
You can delete the sketched entities by right-clicking on them and then choosing the Delete option from the shortcut menu.(t/f)
True
the parts mode of SOLIDWORKS is a feature based parametric environment in which you can create solid models (t/f)
True
The _________ relation is used to make two points, a point and a line, or a point and an arc coincident.
coincident
The __________ is used to detect interference and collision between the parts of an assembly when the assembly is in motion.
collision detection
The ________ relation forces two selected arcs, two circles, a point and an arc, a point and a circle, or an arc and a circle share the same center point.
concentric
The __________ relation forces two selected lines to become equal in length.
equal
In solidworks, a rectangle is considered a combination of individual ______
lines
Which of the following options is not displayed in the new Solid works Document diolog box? (a)part (b)assembly (c)Drawing (d)Sketch
sketch
True or False: The base feature of any design is a sketched feature and is created by drawing a sketch.
true