Cad quiz

Which tool do you need to use to draw a rectangle at any angle?

3 Point Corner Rectangle

The ______ property ensures that any modification made in a model in any of the modes of SOLID WORKS is also reflected in the other modes immediately.

Bidirectional associativity

Which tool is used to create a circular pattern in the sketching enviromnet of SOLIDWORKS?

Circular Sketch Pattern

Which of the following entities is not considered while converting a sketch into a feature? (a)sketch circules (b)sketched lines (c)Construction Lines (d)None of these

Construction Lines

Which tool is used to invoke dynamic mirroring?

Dynamic Mirror Entities

Which of the following tools is used to create an automatic mirror line? (a)Dynamic mirror entities (b)Mirror (c)Automatic Mirror (d)None of these

Dynamic mirror entities

Which of the following PropertyManagers is displayed while drawing an elliptical arc? (a)Arc PropetyManager (b)Ellipse PropertyManager (c)Elliptical Arc PropertyManager (d)None of these

Ellipse PropertyManager

____________ are the analytical and numerical formulae applied to the dimensions during or after sketching of the feature sketch.

Equations

In SOLID WORKS, solid models are created by integrating a number of building blocks called features.

False

In Solid works, circles are drawn by specifying the center point of the circle and then entering the radius of the circle in the dialog box displayed

False

The origin is a blue icon that is displayed in the middle of the sketcher screen.(t/f)

False

The preview of an entity to be extended is displayed in red. (t/f)

False

The sketched entities can be mirrored without using center lines. (t/f)

False

The tip of the day is displayed at the bottom of the task pane

False

True or False: By default, the cursor jumps through a distance of 5 mm when the grid snap is on.

False

True or False: If you save a file in the sketching environment and then open it the next time, it will open in the part modeling enviroment.

False

True or False: In the sketching environment, you can apply fillets to two parallel lines.

False

True or False: The design intent is not captured in the sketch created using the mirror line.

False

True or False: You can choose Insert > Customize from the SOLIDWORKS menus to display the Customize dialog box.

False

True or False: You cannot offset a single entity using the Offset Entities tool.

False

When you open a new Solid works document, it is not maximized in the solid works window.

False

You can not trim a sketched entity using the trim entities tools.(t/f)

False

Which of the following property Mangers is displayed when you choose the sketch fillet button from the sketch command manager (a) sketch fillet (b)fillet (c)Surface fillet (d)sketching fillet

Fillet

You can convert a sketched entity into a construction entity by selecting which checkbox? (provided in the Property Manager)

ForConstruction

What are temporary lines that are used to track a particular point on the screen?

Inferencing lines

Which of the following property Managers is displayed when you select a line of a rectangle? (a)Line Properties PropertyManager (b)Line/Rectangle PropertyManager (c)Rectangle PropertyManager (d)None of these

Line Properties PropertyManager

Which tool is used to create a linear pattern in the sketching environment of SOLIDWORKS?

Linear Sketch Pattern

In Solidworks, a polygon is considred as a combination of which of the following entites? (a)Lines (b)Arcs (c)Splines (d)none of these

Lines

Which tool do you use to modify a sketched circle?

Select

You can invoke the ________ tool or press the ESC key to exit the currently active sketching tool.

Select

Which of the following propertyManagers is displayed on the left of the drawing area when you choose Tools>sketch tools<Chamfer (a)Sketch chamfer (b)Sketcher Chamfer (c)Skecthing Chamfer (d)Chamfer

Sketch chamfer

Which of the following tools is used to break a sketched entity into two or more entites? (a)split entities (b)Trim sketch (c)Break Curve (d)Trim Curve

Split Entities

When you select a tangent entity to draw a tangent arc, the ________ relation is applied between the start point of the arc and the tangent entity.

Tangent

A three point arc is drawn by defining the start point, the endpoint, and a point on the arc. (t/f)

True

Generative drafting in the process of generating drawing views of a part of an assembly created earlier.

True

The Dimension angle between axes check box in the linear pattern propertymanager is used to display the Angular dimension between the two directions of a pattern (t/f).

True

There are four types of slot tools available in solid works.(t/f)

True

True or False: The Trim Entities tool is also used to extend the sketched entities.

True

True or False: You can apply a fillet to two nonparallel and non-intersecting entities.

True

True or False: You can invoke the arc mode using the Line tool.

True

You can delete the sketched entities by right-clicking on them and then choosing the Delete option from the shortcut menu.(t/f)

True

the parts mode of SOLIDWORKS is a feature based parametric environment in which you can create solid models (t/f)

True

The _________ relation is used to make two points, a point and a line, or a point and an arc coincident.

coincident

The __________ is used to detect interference and collision between the parts of an assembly when the assembly is in motion.

collision detection

The ________ relation forces two selected arcs, two circles, a point and an arc, a point and a circle, or an arc and a circle share the same center point.

concentric

The __________ relation forces two selected lines to become equal in length.

equal

In solidworks, a rectangle is considered a combination of individual ______

lines

Which of the following options is not displayed in the new Solid works Document diolog box? (a)part (b)assembly (c)Drawing (d)Sketch

sketch

True or False: The base feature of any design is a sketched feature and is created by drawing a sketch.

true