Ch. 1 - Computer Systems Management

How many pins are used in a serial port?

9-pin

a type of memory slot found on a motherboard

DIMM (dual inline memory module)

a series of tests performed by the startup UEFI/BIOS when you first turn on a computer

POST

What tool can help discover and report computer errors and conflicts that occur when you first turn on a computer and before the operating system is launched.

POST card

a computer is said to be in this mode when all wireless technologies are turned off

airplane mode

How many pins are in the power supply connector that is typically used on most motherboards today?

24-pin

Sometimes an expansion board may have an extra PCIe power connector. This connector comes in what two different pin configurations?

6-pin and 8-pin

What two different types of firmware may be used on motherboards?

BIOS UEFI

a short-range wireless technology used to connect two devices in a small personal network

Bluetooth

also called the processor, or microprocessor, does most of the processing of data and instructions for the entire system

CPU

You are troubleshooting a laptop with multiple sticking keys that result in misspelled words while the user types. Other than several sticking keys, the laptop appears to be functioning properly. You have cleaned the keyboard with compressed air, but the problem persists. After removing one of the key tops, it becomes apparent that a liquid was spilled into the keyboard. Which of the following is the next step in resolving the issue of sticking keys?

Clean the keyboard keys with a contact cleaner.

transmits digital video and audio and is slowly replacing VGA and DVI

Display Port

What type(s) of port transmits both digital audio and digital video with a single connector? Select all that apply.

DisplayPort & HDMI

A technician needs to service a laptop computer that is experiencing an intermittent problem with the display. Which of the following will be most effective at helping the technician complete the work in a timely and efficient manner? (Select TWO).

Document and label the location of the screws and cables before removing them. and Organize and place all parts and screws and in one place.

What acronym is another name for static electricity, which can damage chips and destroy motherboards?

ESD

List four components found on a motherboard.

Expansion slots, CPU socket, chipsets, heat sink

A user called to inform you that the laptop she purchased yesterday is malfunctioning and will not connect to her wireless network. You personally checked to verify that the wireless worked properly before the user left your office. The user states she rebooted the computer several times but the problem still persists. Which of the following is the first step you should take to assist the user in resolving this issue?

Have the user press the appropriate function key combination to enable the wireless radio and then attempt to connect to the wireless network.

draws heat from the CPU and pipes it to a fan, which then blows heat out of the case

Heat sink

What connector has 4 pins, is used for older IDE drives and some SATA drives, and can provide +5 V and +12 V power outputs?

Molex connector

a slot used for expansion cards or video cards on a motherboard

PCIe (Peripheral Component Interconnect Express)

Molly, an end user, connects an external monitor, external keyboard and mouse, and a wired network cable to her laptop while working in the office. She leaves the office frequently to meet with customers and takes the laptop with her. Disconnecting and reconnecting these external connections has become inconvenient. Which of the following devices will allow the user to disconnect and reconnect the laptop to the external connections with the least amount of effort? (Select TWO).

Port replicator Docking station

What is the component called that usually has a dual-voltage selector switch and has cables that connect to the motherboard and internal components?

Power supply unit (PSU)

What is the connector called on a network cable that connects to an Ethernet port?

RJ-45 connector

a smaller type of memory slot typically used for laptops

SO-DIMM (small outline dual inline memory module)

A technician has determined that a laptop keyboard will need to be removed in order to replace the laptop's CPU cooling fan. Which of the following steps will most likely be required before the technician can remove the keyboard from the laptop? (Select TWO.)

The keyboard cable(s) will need to be disconnected from the ZIF socket(s). and The keyboard bezel will need to be removed.

What are two resources that may be useful in disassembling a laptop computer?

User manual and Service manual

When is it okay to touch the inside of a computer that is turned on?

When using a multimeter to measure voltage output

What is the very first step that should be taken when performing work with a computer?

You should back up any important data

Which statement is NOT a good practice when working inside a computer case?

be sure to hold expansion cards by the edge connectors

Which statement is NOT true regarding motherboards?

has a heat sink on the PCIe slots

reduces the total cost of a system by reducing the number of expansion slots on the motherboard, reducing the power supplied to the board, and allowing for a smaller case size

micro-ATX

What two devices in a computer should be considered "black boxes," and should never be opened due to risks involving charged capacitors?

monitor power supply

What is the second step in opening the case of a working computer?

power down the system and unplug it

When handling a motherboard, cards, or drive, which statement is NOT accurate?

you should not hold expansion cards by the edges