Chapter 27 Woodshop Study Guide
Plug Cutters
A bit used to cut cross-grain and end-grain plugs and dowels is known as a(n) ____. (2 words)
Brad-Point Bit
A bit with a sharp point that lets you place the hole exactly where you want it.
Mortising Attachment
A drill bit surrounded by a four-sided chisel.
Countersink Bit
Cone-shaped bit that enlarges the top of a hole so that a flathead screw can be driven flush with the surface.
Fly Cutter
Cuts circular holes from 1 to 4 inches in diameter.
Hole Saw
Cuts holes up to 6 inches in diameter.
Multispur Bit
Cuts perfectly round, flat-bottomed holes.
Spade Bit
Fast-cutting bit that leaves a rather rough hole.
Adjustable Screw Pilot Bit
Installs and countersinks flathead screws
True
On machines with step pulleys, the speed is set by the way the belt is arranged on the pulleys.
Depth Gauge
The ____ or stop controls how far the drill bit or cutting tool can move. (2 words)
V-Block
To drill a hole in round (cylindrical) stock, you should first place the stock in a(n) ____.
Twist Drill
Use a(n) ____ to drill holes that are 1/4 inch or smaller. (2 words)
True
When used at the proper speed, a drill press can be used for sanding.
False
You should always turn the power off before adjusting the depth stop.