Chapter 27 Woodshop Study Guide

Plug Cutters

A bit used to cut cross-grain and end-grain plugs and dowels is known as a(n) ____. (2 words)

Brad-Point Bit

A bit with a sharp point that lets you place the hole exactly where you want it.

Mortising Attachment

A drill bit surrounded by a four-sided chisel.

Countersink Bit

Cone-shaped bit that enlarges the top of a hole so that a flathead screw can be driven flush with the surface.

Fly Cutter

Cuts circular holes from 1 to 4 inches in diameter.

Hole Saw

Cuts holes up to 6 inches in diameter.

Multispur Bit

Cuts perfectly round, flat-bottomed holes.

Spade Bit

Fast-cutting bit that leaves a rather rough hole.

Adjustable Screw Pilot Bit

Installs and countersinks flathead screws

True

On machines with step pulleys, the speed is set by the way the belt is arranged on the pulleys.

Depth Gauge

The ____ or stop controls how far the drill bit or cutting tool can move. (2 words)

V-Block

To drill a hole in round (cylindrical) stock, you should first place the stock in a(n) ____.

Twist Drill

Use a(n) ____ to drill holes that are 1/4 inch or smaller. (2 words)

True

When used at the proper speed, a drill press can be used for sanding.

False

You should always turn the power off before adjusting the depth stop.