Exam 2

Ace your homework & exams now with Quizwiz!

At a minimum, which locations should a rainscreen wall be vented?

-Bottom -Top

What is the purpose of an air space on a rain screen wall?

Air space is used to ventilate moisture away from a wall system

Which insulation has the highest embodied energy?

Fiberglass

Of the items below, what is the major benefit of a rainscreen?

Improves Wall Durability

Next to the decision on how to site the house, which is the next most important decision the architect makes that affects the comfort and energy efficiency of a house?

Insulation type & thickness

What is one benefit of wood siding?

Low energy to manufacture

What door type is depicted below? (Narrow Rectangular Window On Door)

Narrow Light

Shed roofs are roofs designed with a slope in [a] direction(s) only.

One

In standard, residential light-wood framed roofing the primary weather barrier is ______.

Roofing Felt

The round device shown in the image link below is referred to as a ____? (Roof 15)

Roof Drain

The glazing unit is located within the _________.

Sash

Which is the best face of a building to maximize windows in a cold climate?

South

Which component is integral in providing an air gap in a rain screen?

furring strip

What is being installed in this photo?

Sealant which is part of the air barrier

What window is depicted below? (Slide Side To Side)

Slider

A building material with a perm rating of 1.1 is MORE PERMEABLE than a building material with a perm rating of .11.

True

A roof slope of 12:12 would be considered a steep slope roof.

True

Cities like Las Vegas and Phoenix have seen exponential growth in the last century because technological advances in mechanical ventilation and cooling.

True

In theory, a roof is just an exterior wall turned horizontal.

True

Security glass is a type of laminated glass.

True

The wall below provides redundant protection against the elements. (South Elevation installation Detail)

True

Wood studs in walls and roof rafters are two common locations in which thermal bridging can occur in the building envelope.

True

Heat-strengthened glass has ___ the strength of annealed glass of the same thickness.

Two times

The three main types of stone are:

sedimentary, metamorphic, igneous

Why are the vertical rails being installed behind the cladding in the image below? (Image 2515

to create a rainscreen

What window is depicted below? (Slide up and Down)

Double Hung

Which is considered a Class II Vapor Retarder?

Extruded polystyrene

A building material with a perm rating of .1 is LESS PERMEABLE than a building material with a perm rating of .01.

False

Closed-cell spray foam is a vapor permeable insulation.

False

Curtain walls are used in both exterior and interior conditions because they have the ability to double as the primary structure for a building.

False

Hinged window and door units provide a better air seal than fixed window units.

False

Since most modern roof systems use materials with a high solar reflectance, building codes have lessened the total R-value of the roof assembly in the most recent additions of the IBC and the IRC.

False

The wall below provides redundant protection against the elements. (Wall-03)

False

Unconditioned, unoccupied attics are fantastic spaces to install ductwork since the system can easily reach various areas of the building by threading ducts through the trusses.

False

What is the stainless steel material shown in the image link below? (Roof 16)

Flashing

_____ , typically comprised from sheet metal or continuous membrane is used to cover and protect joints,angles and material changes from water intrusion and leakage.

Flashing

In the drawing below, what does the material denoted a "B" represent? (Wall-14)

Furring Strip

What is the most critical component of roof design?

Water Management (While each of those attributes are important, the primary purpose of the roof is to keep the elements (rain & snow) out of the interior of the building.)

Which is considered a vapor semi-impermeable material?

XPS

When specifying a storefront systems for an exterior application, it is imperative to use ______

a thermally-broken mullion system


Related study sets

Chapter 20 - Problem of Moral Hazard

View Set

Sem 2 lower respiratory system drugs

View Set

Chapter 56: The Patient With a Disability

View Set

Entrepreneurship and Economic Development

View Set