MKT 411 - Test 2 (Chapters 5, 6, and 7)

Ace your homework & exams now with Quizwiz!

Which of the following is true under the Periodic Review System? a. a higher level of safety stock is needed to buffer against uncertainty in demand over a longer planning horizon, compared to the EOQ system b. a lower level of safety stock is needed to buffer against uncertainty in demand over a longer planning horizon, compared to the EOQ system c. it is more expensive to administer compared to the Continuous Review System d. the only uncertainty is the magnitude of demand during the delivery lead time e. there are no discrepancies between physical inventory and the stock record

a. a higher level of safety stock is needed to buffer against uncertainty in demand over a longer planning horizon, compared to the EOQ system

Complete the following MRP record and provide the planned order releases for week 1. Lead time is 2 weeks. Safety stock is 3. Use LFL lot sizes. a. 29 b. 26 c. 34 d. 14

a. 29

Use the information below to calculate the number of orders per year when using the EOQ: Annual demand for an item is 43,000 units The cost to place an order is $200 The per unit cost of the item is $50.00 The annual holding rate is 35% Choose the closest answer. a. 49 b. 81 c. 202 d. 123

a. 49

Which of the following is considered an advantage/benefit of utilizing an ERP system? a. enables the company to utilize a single centralized database system, thus eliminating duplicate data entries b. flexible enough that it allows different companies with different business models to mold the new ERP system to fit the company's business model c. fairly inexpensive to purchase and implement d. all of these choices are correct.

a. enables the company to utilize a single centralized database system, thus eliminating duplicate data entries

Quantitative forecasts use mathematical techniques that are based on: a. historical data b. sales force knowledge of the market c. surveys d. expert opinions

a. historical data

Inaccurate forecasts can result in negative outcomes like: a. imbalances in supply and demand b. material shortages and decreased costs of obsolescence c. low inventory costs and stockouts d. high inventory costs and increased profits

a. imbalances in supply and demand

Cyclical variations are longer than a year and can be influenced by: a. political factors b. events such as natural disasters c. population growth d. imbalances in supply and demand

a. political factors

While ERP is a relatively new technology, it has grown rapidly since the early 1990s. Which of the following is the reason that has contributed to its rapid growth? a. the year 2000 millennium bug b. the increased use of email during the 1990's c. the trend for companies to eliminate their supply chain partners d. all of these choices are correct

a. the year 2000 millennium bug

A positive error implies that a forecast was? a. too low b. too high c. neither too high or too low d. the sign of an error gives no information as to the direction of the error

a. too low

The inventory turnover ratio shows how efficiently a firm is using its inventory to generate revenue. a. true b. false

a. true

Calculate the final discrete available-to-promise quantity for Week 1 using the following table. a. ATP1 = 0 b. ATP1 = 10 c. ATP1 = 20 d. ATP1 = 15

b. 10

Not all ERP software is designed to provide the exact same tools, nonetheless, some of the common modules usually included in ERP software packages include: a. computer assisted drawing and Photo enhancing b. customer relationship management and human resource management c. operating systems and Internet browsing d. all of these choices are correct

b. customer relationship management and human resource management

All of the following may influence demand and should be considered when developing a forecast EXCEPT: a. new competition b. ergonomic conditions c. emerging markets d. supplier quality

b. ergonomic conditions

In 2016, Spin Master, did not properly forecast demand for their new product, Hatchimals, causing ___________ for their distributors. a. excess stock b. price reductions c. stockouts d. the bullwhip effect

c. stockouts

Why are firms migrating to ERP systems? a. ERP systems are successful with two-dimensional processes b. ERP systems are inexpensive to implement c. ERP systems are easy to implement, particularly in large organizations d. ERP systems the together a variety of specialized systems

d. ERP systems the together a variety of specialized systems

The _____ specifies which end product is to be made, how many are required, and when they need to be completed. a. master production schedule b. bill of material c. super bill of materials d. aggregate production plan

d. aggregate production plan

Legacy MRP systems had which of the following limitations? a. the systems were designed to perform a very special operational function b. the systems needed continuous modifications c. the systems were not user-friendly d. all of these are correct

d. all of these are correct

Which of the following is a benefit of CPFR? a. uses joint planning and promotions management b. provides an analysis of key performance metrics c. integrates planning, forecasting, and logistics activities d. all of these choices are correct

d. all of these choices are correct

Which of the following is NOT a common module of ERP systems? a. supply chain management b. customer relationship management c. human resources management d. marketing resources management

d. marketing resources management

The primary purpose of the basic economic order quantity (EOQ) model is to: a. maximize the customer service level b. calculate the reorder point, so that replenishments take place at the proper time c. calculate the optimum safety stock level d. minimize the sum of purchase cost and holding cost e. none of these choices are correct.

e. none of these choices are correct.

Based on the information in the data set below, what is the mean squared error (accurate to 1 decimal)? Month ---- Actual ---- Forecast 1 ---- 12 ---- 11 2 ---- 13 ---- 10 3 ---- 10 ---- 8 4 ---- 11---- 6 5 ---- 9 ---- 8 a. 8.0 b. 1.00 c. 10.0 d. 0.8

a. 8.0

Which strategy uses overtime and subcontracting to cope with the high demand periods? a. mixed production strategy b. the level production strategy c. the aggregate production strategy d. the chase production strategy

a. mixed production strategy

According to the textbook, the top three challenges for CPFR implementation include all of the following EXCEPT: a. supplier lead times b. trust between supply chain partners c. making organizational and procedural changes d. cost

a. supplier lead times

Which strategy allows finished goods inventories to accrue and relies on backlogs to handle the demand? a. the level production strategy b. the aggregate production strategy c. mixed production strategy d. the chase production strategy

a. the level production strategy

Using the data set below, what would be the forecast for period 5 using the exponential smoothing method? Assume the forecast for period 4 is 14000. Use a smoothing constant of α = 0.4. Period -- Actual Demand 1 ---- 10,000 2 ---- 12,400 3 ---- 13,250 4 ---- 14,750 5 ---- 15,220 6 ---- 18,500 a. 13,190 b. 14,030 c. 12,660 d. 15,220

b. 14,030

A forecasting method has produced the following data over the past 5 months shown in the data set. What is the mean absolute deviation? Month --- Actual --- Forecast 1 ---- 12 ---- 11 2 ---- 13 ---- 10 3 ---- 10 ---- 8 4 ---- 11 ---- 6 5 ---- 9 ---- 8 a. 10.0 b. 2.4 c. 2.0 d. -1.2

b. 2.4

Using the ________________ multiple software infrastructures and databases may have to be used to link the multiple applications obtained from different vendors. a. multi-modular solution b. best-of-breed solution c. premier application solution d. elite integrator solution

b. best-of-breed solution

If an item is ordered using its economic order quantity, the annual carrying cost should be: a. twice the annual purchase price. b. equal to the annual ordering cost. c. the square root of the annual ordering cost. d. slightly less than the annual ordering cost. e. none of these choices are correct.

b. equal to the annual ordering cost.

The real value of Collaborative Planning, Forecasting, and Replenishment (CPFR) comes from: a. sophisticated forecasting algorithms b. exchange of forecasting information c. both A and B d. none of the above

b. exchange of forecasting information

The ABC inventory control prioritizes dependent demand inventory items into three groups, A, B, and C. A items receive the smallest amount of safety stock, while C items typically have the most safety stock. a. true b. false

b. false

The four categories of inventory are raw materials, intermediate assemblies, work-in-progress and finished goods. a. true b. false

b. false

Classify the following inventory items as either A, B, or C items using the ABC inventory control system: a. item 1 (C), item 2 (B), item 3 (C), item 4 (A), item 5 (C) b. item 1 (C), item 2 (A), item 3 (C), item 4 (B), item 5 (C) c. item 1 (A), item 2 (B), item 3 (C), item 4 (A), item 5 (B) d. item 1 (B), item 2 (C), item 3 (B), item 4 (C), item 5 (A) e. item 1 (B), item 2 (A), item 3 (A), item 4 (C), item 5 (C)

b. item 1 (C), item 2 (A), item 3 (C), item 4 (B), item 5 (C)

Which of the following seeks to develop short range plans seeking to effectively and efficiently manage components and/or subassemblies over time period of few days to a few weeks? a. resource requirements plan b. material requirements plan c. master production schedule d. rough-cut capacity plan

b. material requirements plan

If an available-to-promise (ATP) for any period is negative, the deficit must be subtracted from the: a. master Production Schedule b. most recent positive ATP c. beginning inventory d. bill of materials

b. most recent positive ATP

Which of the following is NOT an assumption of the economic order quantity (EOQ) model? a. lead time is known and constant. b. production and use occur simultaneously. c. demand is known, constant, and independent. d. the only variable costs are setup cost and holding cost. e. quantity discounts are not possible

b. production and use occur simultaneously.

Which of the following is not a type of qualitative forecasting? a. consumer survey b. simple moving average c. jury of executive opinion d. sales force composite

b. simple moving average

The ____ solution picks all the desired applications from a single vendor for the ERP system. a. elite integrator b. single integrator c. best-of-breed d. premier application

b. single integrator

Your company is conducting forecasting that revolves around population growth in large cities. This type of forecasting can be referred to as what component of a time series? a. cyclical variations b. trend variations c. seasonal variations d. random variations

b. trend variations

If your company had an annual purchase cost of items equal to $2,000,000, an annual holding cost of $150,000 and an annual ordering cost of $50,000 this scenario would reveal that: a. your order size was lower than the EOQ b. your order lot size was higher than the EOQ c. your order lot size was equal to the EOQ d. nothing because there is insufficient information to discern where the EOQ would be.

b. your order lot size was higher than the EOQ

The cost of a product is $5, and the carrying cost rate is 20%; the cost of processing an order is $45 and the annual demand is 1000. What is the economic order quantity (EOQ)? a. 200 b. 5 c. 300 d. 20 e. 25

c. 300

When demand and delivery lead time are known and constant, daily demand = 8, purchase lead time = 5 days, and the purchase price = $20/unit, then the reorder point is: a. 56. b. 32. c. 40. d. 2. e. 13.

c. 40

Which of the following would be considered a dependent demand item? a. televisions b. retail customers c. bicycle tired to assemble a bicycle d. furniture

c. bicycle tired to assemble a bicycle

An advantage/benefit of utilizing an ERP system includes which of the following? a. ERP systems are designed to take advantage of internet technology b. ERP systems enable the firm to automate some of the steps of a manufacturing process c. both "ERP systems are designed to take advantage of Internet technology" & "ERP systems enable the firm to automate some of the steps of a manufacturing process" d. none of these choices are correct.

c. both "ERP systems are designed to take advantage of Internet technology" & "ERP systems enable the firm to automate some of the steps of a manufacturing process"

The impact of poor communication and inaccurate forecasts resonates along the supply chain and results in the: a. CPFR effect b. Delphi method c. Bullwhip effect d. Mean deviation

c. bullwhip effect

Which of the following basic production strategies works best with make-to-order manufacturing firms? a. mixed production strategy b. capacity production strategy c. chase production strategy d. level production strategy

c. chase production strategy

Which of the following is a disadvantage of carrying too much inventory? a. it increases the need to purchase items. b. it leads to lower average finished goods inventories. c. it creates an unnecessary waste of scarce resources. d. it reduces the need to conduct cycle counts. e. it leads to higher annual inventory ordering costs.

c. it creates an unnecessary waste of scarce resources.

According to the textbook, which of the following is considered a reason that the ERP implementations fail? a. top management becomes overcommitted to the point where they constantly encourage the employees during implementation b. organizations tend to spend too much time and money training their employees on the new system c. lack of communication within an organization d. all of these are correct

c. lack of communication within an organization

Legacy MRP systems typically utilized multiple software packages and databases which caused: a. planned order releases b. the system to crash often c. the same information to be stored in multiple locations d. data integrity

c. the same information to be stored in multiple locations

Which one of the following is NOT a reason for firms to carry inventory? a. to meet variations in product demand b. to take advantage of quantity discounts c. to increase production change/setup costs d. to maintain independence of operations e. to allow for production scheduling flexibility

c. to increase production change/setup costs

Random variations in a Time Series component are due to: a. inaccurate responses of the expert participants b. using a large value for the exponential smoothing constant c. unpredictable events d. population growth

c. unpredictable events

If at the end of the year, the cost of revenue = $2,500, total revenue = $12,000 and inventory value = $2,000, the inventory turnover ratio would be: a. 0.800 b. 0.208 c. 0.375 d. 1.250 e. 2.667

d. 1.250

Using the data set below, what would be the forecast for period 4 using a three period average: Period ----- Actual Demand 1 ---- 10,000 2 ---- 12,400 3 ---- 13,250 4 ---- 15,750 5 ---- 20,500 6 ---- 18,500 a. 12,244 b. 11,500 c. 14,008 d. 11,883

d. 11,883

Using the data set below, what would be the forecast for period 5 using a four period weighted moving average? The weights for each period are 0.05, 0.15, 0.30, and 0.50 from the oldest period to the most recent period, respectively. Period ---- Actual Demand 1 ---- 10,000 2 ---- 12,400 3 ---- 13,250 4 ---- 14,750 5 ---- 15,220 6 ---- 18,500 a. 12,820 b. 14,610 c. 13,105 d. 13,710

d. 13,710

The College Bookstore sells a unique calculator to college students. The demand for this calculator has a normal distribution with an average daily demand of 20 units and a standard deviation of 4 units per day. The lead time for this calculator is 9 days. Compute the statistical reorder point that results in a 95 percent in-stock probability. Choose the closest answer. a. 20 units b. 80 units c. 420 units d. 200 units e. 180 units

d. 200 units

The College Bookstore sells a unique calculator to college students. The demand for this calculator is constant at 20 units per day. The lead time for this calculator is variable at an average of 9 days with a standard deviation of 2 days. Compute the statistical reorder point that results in a 95 percent in-stock probability. Choose the closest answer. a. 46 units b. 182 units c. 226 units d. 246 units e. 26 units

d. 246 units

Which of the following would refer to the 80/20 rule when applied to the ABC inventory control system? a. 80 percent of the items account for 20 percent of the groups. b. 20 percent of the items account for 80 percent of the tasks. c. 80 percent of the unit cost accounts for 20 percent of the items. d. 80 percent of the total annual $ usage is accounted for, by 20 percent of the items. e. none of these choices are correct.

d. 80 percent of the total annual $ usage is accounted for, by 20 percent of the items.

The _____ planning horizon is shorter than the aggregate production plan's, but must be longer than a firm's production lead time to ensure the end item can be completed within the planning horizon? a. demand time fence b. material requirements plan c. capacity requirements plan d. master production schedule

d. master production schedule

When there is not a lot of currently relevant data available it is generally best to use: a. time series forecasting b. simple moving average forecasting c. naive forecasting d. qualitative forecasting

d. qualitative forecasting

Which of the following is TRUE regarding the EOQ figure below? a. curve J represents the annual ordering cost, and curve L represents the annual holding cost. b. a lot size of G has an annual total cost of about C. c. at lot size H both holding costs and ordering costs exceed the annual total cost. d. the EOQ is at lot size G, and curve K is the annual holding cost curve.

d. the EOQ is at lot size G, and curve K is the annual holding cost curve.

When linear trend forecasts are developed, demand would typically be: a. the lead variable b. the independent variable c. the passive variable d. the dependent variable

d. the dependent variable


Related study sets

Prep U Chapter 34: Assessment and Management of Patients with Inflammatory Rheumatic Disorders

View Set

Vaccinations and Organisms which are Vaccine Preventable

View Set

Conflict Resolution UNIT 2 - CHALLENGE 1

View Set

Us History- New National Government

View Set

Chapter 39: Oxygenation and Perfusion

View Set

English 12:7.22.3 Lesson: Documenting Sources: In-Text Citations

View Set

Modules 16-17: Building and Securing a Small Network

View Set