NEC Code Practice 3
one 225.3
A building or structure shall be supplied by a maximum of ______ feeder(s) or branch circuit(s), unless specifically permitted otherwise.
4 or more 220.14(I)
A device comprised of _______ or more receptacles shall be calculated at not less than 90 VA per receptacle.
3,000 220.52(A) Each circuit is calculated at 1500 VA for load requirements.
A dwelling unit containing two 120V small-appliance branch circuits has a calculated load of ______ VA for the small appliance circuits.
True 210.52(F) Ex1
A laundry receptacle outlet shall not be required in each dwelling unit of a multifamily building, if laundry facilities are provided on the premises for all building occupants.
12 in. or wider 210.52(C)(1)
A receptacle outlet shall be installed in dwelling units for every kitchen and ining area countertop space ________, and no point along the wall line shall be more than 2 ft, measured horizontally, from a receptacle outlet in that space.
6 AWG 200.6(A)
An insulated grounded conductor of ______ or smaller shall be identified by a continuous white or gray outer finish, or by three continuous white stripes on other than green insulation along its entire length.
True 230.6(5)
Conductors installed in overhead service masts on the outside surface of the building traveling through the eave of that building are considered to be outside of the building.
a.indoor wet locations b.locker rooms adjacent to showering facilities c.garages, service bays, and similar areas d.all of these 210.8(B)(6), (7) and (8)
In other than dwelling locations, GFCI protection is required in _____ .
35 lb 314.27(C)
Listed outlet boxes to support ceiling-suspended fans that weigh more than ________lb shall have the maximum allowable weight marked on the box.
5,000 220.54
The load for electric clothes dryers in a dwelling unit shall be _______ watts or the nameplate rating, whichever is larger, per dryer.
a. 1A b. 6A c. 601A d. *********all of these********** 240.6(A)
The standard ampere rating for fuses includes _______ .
a.located in damp or wet locations b.exposed to fumes, vapors, liquids or gases c.exposed to excessive temperatures d.******all of these**************** 110.11
Unless identified for use in the operating environment, no conductors or equipment shall be _____ having a deteriorating effect on the conductors or equipment.
effectively closed to afford protection substantially equivalent to the wall of the equipment 110.12(A)
Unused openings other than those intended for the operation of equipment, intended for mounting purposes, or permitted as part of the design for listed equipment shall be _____ .
two 314.16(B)(1)
When counting the number of conductors in a box, a conductor running through the box with an unbroken loop or coil not less than twice the minimum length required for free conductors shall be counted as _______ conductor(s).
true 230.2(E)
true-breeding